2006 HONDA ACCORD battery

[x] Cancel search: battery

Page 142 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µ
Todothis,pressandholdthetwo 
outside buttons on the HomeLink
transceiver for about 20 seconds,
until the red indicator f lashes.
Release the buttons, then proceed to
step 1.
The HomeLinkuniversal

Page 161 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual Apply the parking brake. 
In cold weather, turn of f all 
electrical accessories to reduce
the drain on the battery.Turn the ignition key to the
START (III) position. Do not hold
the key in START (III

Page 183 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual All service items not detailed in this 
section should be perf ormed by a
certif ied technician or other qualif ied
mechanic. 
To eliminate potential hazards, read 
the instructions bef ore you begin,

Page 225 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µ
Check the condition of the battery 
monthlybylookingatthetest
indicator window. The label on the
battery explains the test indicator’s
colors. Check the terminals f or corrosion (a
white or yell

Page 226 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual If you need to park your vehicle f or 
an extended period (more than 1
month), there are several things you
should do to prepare it f or storage.
Proper preparation helps prevent
deterioration and mak

Page 227 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual Block the rear wheels. 
If the vehicle is to be stored f or a 
longer period, it should be
supported on jackstands so the
tires are of f the ground. 
Leave one window open slightly (if 
the vehicle is

Page 233 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual Diagnosing why the engine won’t 
start f alls into two areas, depending
on what you hear when you turn the
ignition switch to the START (III)
position:When you turn the ignition switch to
the START

Page 234 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual In this case, the starter motor’s 
speed sounds normal, or even f aster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.Are you using the prop
Page:   < prev 1-8 9-16 17-24 25-32 next >