Your vehicle has two temperature
control dials, one f or the driver, and
one f or the f ront passenger.
Your vehicle has four temperature
control buttons, two f or the driver,
and two f or the passenger.
Thedriver’ssideandthepassenger’s
side can be controlled independently
by adjusting these dials or buttons
when the indicator in the DUAL
button is on.
CONT INUED
With navigation system
On EX-L and EX-V6 models without
navigation system
Dual Temperature Control
Features
121
DUAL BUTTON
DUAL BUTTON
DRIVER’S SIDE
TEMPERATURE
CONTROL BUTTONS PASSENGER’S SIDE
TEMPERATURE
CONTROL BUTTONS
DRIVER’S SIDE
TEMPERATURE
CONTROL DIAL
PASSENGER’S SIDE
TEMPERATURE
CONTROL DIAL
Without navigation system
With navigation system
——y
y
(%y
y
ÛÝ
ÛÝ To set the driver’s side temperature
dif f erently than the passenger’s,
press the DUAL button, then turn
the driver’s control dial or press theor buttons on the driver’s side.
To set the passenger’s side
dif f erently than the driver’s, turn the
passenger’s control dial or press the or buttons on the passenger’s
side. You can adjust the passenger’s
side without pressing the DUAL
button first. When you set the temperature to its
lower or upper limit, it is displayed asor .
Push AUTO or to turn on the
system. The selected temperatures
appears in the display (in the upper
display with the navigation system).
When the indicator in the DUAL
button is off, you can adjust both
sides to the same temperature by
adjusting the driver’s side
temperature control dial or buttons.
T emperat ure Cont rol Dials/But t ons
Dual Temperature Control
122
PASSENGER’S SIDE
DRIVER’S SIDE
——y
y
(%y
y
ÛÝ´
µ ´
µ
´
µ
The VOL button adjusts the volume
up ( ) or down ( ). Press the top
or bottom of the button, hold it until
the desired volume is reached, then
release it.
If you are listening to the radio, use
the CH button to change stations.
Each time you press the top ( ) of
the button, the system goes to the
next preset station on the band you
are listening to. Press the bottom
( ) to go back to the previous
station. If youareplayingaCD,thesystem
skips to the beginning of the next
track each time you press the top
( ) of the CH button. Press the
bottom ( ) to return to the
beginning of the current track. Press
it twice to return to the previous
track. You will see the disc and track
numbers in the display.
If youareplayingatapeinthe
optional tape player, press the top
( ) of the CH button to advance to
the next selection. Press the bottom
( ) to go back to the previous
selection. The system senses a silent
period, then resumes playing.
The MODE button changes the
mode. Pressing the button
repeatedly selects FM1, FM2, AM,
CD (if a CD is loaded), or a tape (if
equipped). On models with satellite
radio system, you can also select
XM1 and XM2.
Three control buttons f or the audio
system are mounted in the steering
wheel hub. These buttons let you
control basic audio f unctions without
removing your hand f rom the wheel.
On all models except the 4-cylinder LX
Remote Audio Controls
Features
171
VOL BUTTON MODE BUTTON
CH BUTTON
——y
y
(%y
y
µ
If you are training HomeLink to
operate a garage door or gate, you
should unplug the motor for that
devi ce during training. Repeatedly
pressing the remote control button
could burn out the motor. They
do not have the safety feature
that causes the motor to stop and
reverse if an obstacle is detected
during closing, increasing the risk of
injury.
HomeLink stores the code in a
permanent memory. There should
be no need to retrain HomeLink if
your vehicle’s battery goes dead or is
disconnected. If your garage door
opener was manufactured before
April 1982, you may not be able to
program HomeLink to operate it.
The
HomeLinkuniversal
transceiver built into your vehicle
canbeprogrammedtooperateup to
three remotely controlled devices
around your home, such as garage
doors, lighting, or home security
systems.
For quick and accurate training,
make sure the remote control
transmitter for the device (garage
door, automatic gate, security
system, etc.) has a fresh battery. If
you just
receiv ed your vehicle and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button.
If you are training the second or
third buttons, go directly to step 1.
Unplug the garage door opener
motor from the electrical outlet.
Holdtheendofthegaragedoor
opener remote 2 to 5 inches from
HomeLink.Makesureyouarenot
blocking your view of the red
indicator in HomeLink.
Always
refer to the operating
instructions and safety information
that came with your garage door
opener or other equipment you
intend to operate with HomeLink. If
you do not have this information,
contact the manuf acturer of the
equipment. Todothis,pressandholdthetwo
outside buttons on the HomeLink
transceiver for about 20 seconds,
until the red indicator f lashes.
Release the buttons, then go to step
1.
2. 1.
On EX-V6 model
General Inf ormation
Important Saf ety PrecautionsT raining HomeL ink
Bef ore you begin
HomeL ink Universal Transceiver
178
——y
y
(%y
y
Plug in the garage door opener
motor, then test the HomeLink
button by pushing it for about 1 second.
If the button works,
programming is complete.
If the button does not work go
to step 6.
Press and hold the remote
transmitter button and one of the
HomeLink buttons at the same
time. If the red indicator in HomeLink
begins to flash slowly at first,
then rapidly, release both
buttons, and go to step 5. If the red indicator in HomeLink
continues to flash slowly (does
not flash rapidly), your remote
transmitter may stop
transmitting after a short time.
Go to step 4.
Press and hold the remote
transmitter button and one of the
HomeLink buttons at the same
time. While continuing to hold the
HomeLink button, press and
release the remote transmitter
button every 2 seconds. If the red indicator in HomeLink
begins to flash slowly at first,
then rapidly, release both
buttons, and go to step 5.
If the red indicator in HomeLink
continues to flash slowly (does
not begin to fl ash rapidly),
repeat steps 2 thru 4. Repeat these steps to train the
other two HomeLink buttons to
operate any other compatible
remotely controlled d
evices
around your home (lighting,
automatic gate, security system,
etc.). If
the indicator flashes rapidly
for 2 seconds then stays on, you
have a rolling code transmitter:
Go to ‘‘Training with a Rolling
Code System’’ (see page ). If the indicator stays on or
flashes slowly, repeat steps 2
thru 5.
PushandholdtheHomeLink
button f or a f ew seconds, then
watch the red indicator on
HomeLink.
3. 4.
5.6.
7.
180
HomeL ink Universal Transceiver
Features
179
——y
y
(%y
y
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
au thority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
Youshoulderaseallthreecodes
before selling the vehicl e.
Toerasethecodesstoredinallthree
buttons,
press and hold the two
outside buttons until the red
indicator begins to flash, then
release the buttons.
If you want to retrain a programmed
button for a new device, you do not
have to erase all button memory.
You can replace the existing memory
code using this procedure:
Press and hold the HomeLink
button to be trained until the
HomeLink indicator begins to
flash slowly.
If a rolling code transmitter was
previously programmed, the
indicator will flash rapidly for 2
seconds, and then stay on for
about 23 seconds. If
a standard transmitter was
programmed, the indicator will
stay on for about 25 seconds.
HomeLink
is a registered
trademark of Johnson Controls, Inc.
If
you have problems with training
the HomeLink Universal Transceiver,
or would like information on home
products that can be operated by
HomeLink, call (800) 355-3515. On
the Internet, go to
www.homelink.com. Once the HomeLink indicator
begins to f lash slowly, continue to
hold the HomeLink button, and
f ollow steps 3 thru 6 under
‘‘Training HomeLink’’ (see page
).
1. 2.
178
Erasing Codes
Retraining a Button
Customer Assistance
HomeL ink Universal Transceiver
Features
181
——y
y
(%y
y
The cargo net can be used to help
hold down items stored in the trunk.
To use the cargo net, hook it to the
buttons on the f loor and sides of the
trunk. You can use the cargo net in
several conf igurations by hooking it
to dif f erent buttons.
When you are not using the cargo
net,storeitinthesparetirewell.
There are hooks on the f loor and
sides of the trunk. They can be used
to install a net f or securing items.
If you carry any items on a roof
rack,besurethetotalweightof
the rack and the items does not
exceed the maximum allowable
weight. Please contact your dealer
for further information.
If you use an accessory roof rack,
the roof rack weight limit may be
lower. Ref er to the inf ormation that
came with your roof rack.
On EX, EX-L, and EX-V6 models
Carrying Cargo
Cargo Net
T runk Hooks
196
——y
y
(%y
y
ÎCONT INUED
......
Taillights, Changing Bulbs in .250
.
Taking Care of the Unexpected .263
Technical Descriptions
....
DOT Tire Quality Grading .294 .....
Emissions Control Systems .297
.....................
Oxygenated Fuels .184
Three Way Catalytic
.......................
Converter . 298, 299
.........
Temperature Control, Dual .121
.......................
Temperature Gauge .64
........
Temperature, Inside Sensor .123
....................
Temperature, Outside .65
.....................
Tether Anchor Points .45
................
Thef t Protection, Radio .172
Three Way Catalytic
...........................
Converter . 298, 299
..................
Tilt the Steering Wheel .73
..........................
Time, Setting the .173
....................................
Timing Belt .246
....................................
Tire Chains .259
.........
Tire, How to Change a Flat .265
...........................
Tire Inf ormation .296
...............................................
Tires .254
..............................
Air Pressure .256
........................................
Chains .259
.........................
Checking Wear .257
..........................
Compact Spare .264
......
DOT Tire Quality Grading .294
......................................
Inf lation .255
..................................
Inspection .256 .....................................
Labeling .296
..............................
Maintenance .257
...................................
Replacing .258
......................................
Rotating .257
...........................................
Snow .259
....................
Specifications . 291, 293
...................
Tools, Tire Changing . 265
Towing .....................................
A Trailer .213
................
Emergency Wrecker .285
....
Equipment and Accessories .215
.............................................
Tips .217
.....................
Weight Limit . 213, 214
.............................
Trailer Loading . 213
......................
Trailer Towing Tips .217
Transmission
Checking Fluid Level, ......................
Automatic .239, 240
Checking Fluid Level, ...................................
Manual .242
..................
Fluid Selection . 240, 241
..............
Identif ication Number .288
.............
Shif ting the Automatic . 203
..................
Shif ting the Manual . 200
.......................
Starting the Engine .199
In Cold Weather at High ..................................
Altitude .199
................
With a Dead Battery . 272
..............
State Emissions Testing . 300
........
Steam Coming f rom Engine . 274
Steering Wheel ..................................
Adjustment .73
.............
Anti-theft Column Lock . 76
.......
Steering Wheel Buttons . 171, 175
...................
Stereo Sound System . 124
....................
Storing Your Vehicle .262
........................................
Sun Visor .101
........................
Sunglasses Holder . 102
Supplemental Restraint System ......................................
Servicing .30
.........................
SRS Indicator . 28, 58
...................
System Components . 21
..................................
Synthetic Oil .233
Index
INDEX
T
IX
——y
y
(%y
y