B0-17
Assembly of rear door
1. Coat the MP lubricant on the parts before mounting
(a) Coat the MP lubricant on the sliding face and gear of
glass elevator;
Notice: Do not coat the MP lubricant on the spring of
glass elevator.
(b) Coat the MP lubricant on the sliding face of door lock. Vehicle BodyRear Door
2. Mount the outdoor handle with lock barrel and door lock:
(a) Mount the lock barrel on the outdoor handle with spring
snapping ring.
(b) Mount the outdoor handle and the lock barrel with two
bolts;
(c) Mount the lock door with three screws; and
(d) Connect the connecting bar to the outdoor handle.
3. Mount the inside lock ring
Mount the inside lock ring and connect the connecting bar.
4. Mount the glass elevator:
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator (for manually-
operated elevator);
Mount four fixing bolts of elevator (for electric elevator)
(c) Mount the small sliding track and tighten the fixing bolts
temporarily;
(SJ)
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator;
(c) Mount four fixing bolts of elevator bracket.
SJ
SJ
