2006 GREAT WALL SO COOL turn signal

BE-65
Failure of disc box
v
k
k
ON
v
OFF
OFF
Invalid
Invalid
(d) FM/TV failures
FM receiving effection is
not goodWhether the signal of local TV
station is weakPay attention to the
receiving location
Check whether the aerial
interface peels off
The receiving effection of
TV station is badWhether the signal of local
TV station is weakPay attention to the
receiving location
Check whether amplifier works
normally (the lamp is lighting )Turn the amplifier switch to

ON
position
Search the TV station for
another timeAmplifier failure
(e) disc box cannot be sent out
Disc box cannot be sent out
Press
OPEN
keyMove the small window
shrapnel at bottom of disc box
then it can be sent out
Body Electric System
Acoustical Equipment System

BE-66
Mount of bass speaker and VCD
(a) bass speaker
Connect the audio output wires of bass speaker with the sockets in bass speaker correspondingly according
to the wire color (red plugging element should be plugged in red socket, yellow plugging element in white
socket, the grounding wire (black), power wire (yellow) and signal wire (blue) should be fixed at the
corresponding positions (GND
12V
REM) on bass speaker tightly.
(b) multi-disc VCD
The feed cables of VCD main device should be connected as marked, when connecting the plugging element
of wire harness of video camera (CAM) with the plugs on main device (CAM), notice should be taken on the
two arrow marks so as to prevent the plugging element damage; The audio output wire plugging elements (red
and yellow plugs) of bass speaker should be connected with the red and white sockets of mainframe (AV OUT);
the plugging elements of TV receiving input wire of amplifier should be connected with either of the plugging
elements(AV AN) of the mainframe; the plugging element (black and white ACC) of anode wire of power
supply should be connected with the red socket (ACC) of mainframe wire harness; grounding wire plugging
element (black GND) should connect with the black socket of mainframe wire harness; the plugs of audio input
wire of deci-disc data converter should be connected with the red and white socket on mainframe according
to the plugs color (the plugs (red, white CD OUT) of audio input wire of eight-disc box should be connected
with the red, white socket (CD IN) on mainframe according to the plug color, the yellow power wire plugging
element (BATT) should be connected with the yellow power wire socket (BATT) on mainframe, the electric
aerial, plugging elements of control wire of function amplifier should be connected with the electric aerial
(CTL), socket of control line of function amplifier on mainframe. After completing the connection of plugging
elements, wrap the connecting position with adhesive strap in order to prevent those plugging elements from
peeling off, the plugging element of feed cable of TV receiving aerial can connect with any two of the four
holes on amplifier, meanwhile, turn on the switch (with a red indicating lamp) of amplifier when watching the
TV play. When mounting the VCD mainframe, push the wire harness innermost as can as possible so that there
is spacious room for mainframe, then push in the mainframe, notice should be taken not to damage the wire
harness. Fasten the mainframe to the degree that it cannot be pull out by hand after assembling, if it cannot be
clamped tightly, prize out the two clips on the inner sleeve, then fasten the mainframe, and mount on the
external decoration frame finally. When disassembling the mainframe, tear down the external decoration
frame first, then insert the special key into the open grooves at two sides to pull out the mainframe.Body Electric System
Acoustical Equipment System

BE-71
Cab wire harness
aê
1 right front turn lamp
2 outdoor temperature sensor
3 right lever-shaped lamp
4 front fog lamp
5 horn
6 accumulator wire of 220V
7 electromagnetic fan
8 temperature control switch
9 protective box II
10 turn signal lamp on right side
11 brush motor
12 plug of engine wire harness
13 wire harness at right rear door
14 plug of frame wire harness
15 door lamp switch
16 wire harness at right front door
17 door lamp
18 right external electric rear vision mirror
19 protective box III
20 indoor temperature sensor
21 right loudspeaker22 speed-adjusting resistance
23 air blower
24 grounding wire
25 A/C switch
26 controlling element
27 ashtray lamp
28 receiver wire
29 cigarette lighter
30 cigarette lighter
31 rear sound box wire
32 amplifying plate of air-conditioner
33 grounding wire
34 heat-sensitive resistance
35 dual flasher switch
36 fog lamp switch
37 temperature indicator
38 combined switch shell lamp
39 combined switch
40 ignition switch
41 combination instrument A
42 combination instrument B43 parking brake switch
44 brake switch
45 left loudspeaker
46 control case of central control lock
47 grounding wire
48 grounding wire
49 voltage regulator
50 brake liquid level alarming device
51 protective box I
52 plug of wire harness at left rear door
53 door lamp
54 door lamp switch
55 ceiling lamp
56 lamp for reading
57 door lamp
58 door lamp switch
59 backup radar screen
60 right rear loudspeaker
61 highly-mounted stop lamp
62 left rear loudspeaker
1
2
34
5 6
789 10111213
14
15
16
17
18
19
20
2122
23
2425
26
27
28
29 30313233
34
35
36
373839
40
41
4243
4445
4647
48
4950
5152 53
54
55
56
5758 59
60
61
62
Body Electric System
Wire Harness Distribution