2006 GREAT WALL SAFE steering wheel

B0-55Vehicle Body
Instrument Panel
19. Tear down the instrument panel body;
(a) Tear down the three screws and the instrument panel.
(b) Disconnect the plugging elements.
SF:
(a) Tear down the fixing bolts at the ends of instrument panel
body to pull out the fixed clipes at the front end.
(b) Disconnect the plugging elements.
SL SK SJ SY
1. Disconnect the cable of accumulator from the negative
polar (-):
2. Tear down the steering wheel;
3. Tear down the combined switch shell cluster;
4. Tear down the bonnet lock switch;
Tear down the two screws and the sliding fastener of bonnet
lock.
5. Tear down the lower instrument cover;
6. Tear down the lower decorative frame of the instrument
panel;
Prize out the decorative frame of instrument with screwdriver
and take it down.
Notice: the screwdriver must be wrapped with adhesive
strap at its head before using.
7. Tear down the decorative cover of instrument;
(a) Tear down the three screws to pull out the decorative
cover of instrument.
(b) Disconnect the plugging elements.
8. Tear down the ashtray cluster;
9. Tear down the central cover;
(a) Tear down the three screws to pull out the central cover;
(b) Disconnect the plugging elements

A-4
Drive Shaft
Torsion moment
Fastening location Applicable vehicle model N*m
Connecting bolt
Fixing bolt of central supporter74
5
40
5 Dr SF SL SK SY SJ
Dr SL SK SY SJ
Inflation pressure of tire
Ground clearance of chassis
Steering angle of inner wheel
Kingpin inner inclination
Outer inclination of front wheel
Mechanical steering
Power steering
Kingpin rear inclination (inclination)
Mechanical steering
Power steering
Toe-in
Error in length between left and right
drag rod
Side slip valueFront:220
0kPa
Back:240
0kPa
Front:250
0kPa
Back:250
0kPa
295mm
255
mm
58.5mm(difference in height between
shaft center of lower arm and wheel
center)
310
mm
295
mm
36
40


32

32
34

9
30'
5'
14
52'
0
30'
0'
0
10'
0'
0
20'
0'
0
20'
5'
1
50'
-20'
2
5'
5'
2
0'
0'
0-2mm
=2mm
=5m/km

.5m/km
Suspension System and Automobile Axle
Specification
Item Applicable vehicle model Specification
Dr SL SK SY SJ
SF
Dr
SL SK
SF
SY
SJ
Dr SL SK SY
SF
SJ
Dr SL SK SY
SJ
Dr SL SK SY
Dr
SL SK SY
SJ
Dr SL SK SY
Dr SL SK SY
SJ
Dr SL SK SF SY SJ
Dr SL SK SF SY SJ
Dr SF
SL SK SY SJ
HPM

Specification of Maintenance and Up-Keeping
Drive shaft, Suspension System and Automobile Axle

A-6
Torsion moment
Fastening location Applicable vehicle model N*m
Fixing nut of steering wheel
Connecting nut of steering ger and swing arm
Fixing bolt of steering driven arm
Fixing bolt of steering gear
Connecting nut of steering drag rod and swing arm of
steering gear
Connecting nut of steering drag rod and steering driven
arm
Connecting nut of steering drag rod and front brake
Steering limit boltDr SF
SL SK SY SJ
Dr SF
Dr
SF
SL SK SY
SJ
Dr
SF
SL SK SY
SJ
Dr SF
Dr
SF
Dr SF
SJ50
5
30
2
245
25
80
10
142
10
83
10
78
10
96
10
145
10
96
10
78
10
91
10
91
10
59
5
91
10
90
10
Steering system
Specification
Item Applicable vehicle model Specification
Max play of steering wheel
Tension degree of driving belt:
When f=98N New belt
Old beltDr SF
Dr SL SK SF SY SJ
Dr SL SK SF SY SJ6

5-7mm
7-9mm
Specification of Maintenance and Up-Keeping
Steering System

B-2
Disassembling and as-
sembling tools for lock-
ing nut of steering
knuckle3916001



Press fitting tool for in-
ner bearing of front wheel
hub3916002
3916003
3916004
3916005
3916006
3916007
3916008
3916009
3916010 Press fitting tool for outer
bearing of front wheel
hub
Disassembling tool of
ball stud
Fixing tool of main teeth
flange of needle bearing
Press fitting tool for steer-
ing knuckle oil seal
Disassembling tool of
shorter liner of lower arm
Mounting tool of shorter
liner of lower arm
Mounting and disassem-
bling tool of long liner of
lower arm
Disassembling tool of
upper arm liner

























SST Special Service tool
Diagram Tool name tool number Remark
SST Special Tool
Special Service Tool
Application position
Front axle
Rear axle
2WD 4WD