B0-35Vehicle BodyFront Windshield
4. Mount of front windshield.
Dr
(a) Lay the ready glass against the corresponding position of front
windshield opens.
(b) Pull the rope from the inside of body to encase the roof, the front
column and the door frame within the adhesive strip, meanwhile
push the outside of the glass by hand.
(c) Tap the four edges of the adhesive strip to ensure that the
adhesive strip contact closely with the body windshield opened.
(d) Coat the glue from left to right at the upper part of windshield
(location between the adhesive strip and the body windshield open)
and the lower part of windshield (location between the adhesive
strip and glass), and the remaining glue should be cleared away with
abrasive paper, and the location should be cleaned with cloth.
Notice: there should no breakage at the sealing glue seam
when coating the glue.
SL SK SF SY SJ
(a) Suck the front windshield with two sucking discs and put the
glass on the worktable in reverse dirdction.
(b) Seize the upper trim strip of front windshield at the position of
upper glass edge.
(c) Coat the cleaning active agent on the inside edges around the
front windshield (the black glass edges), airing for 3~5 min, then
coat the priming paint on the layer of cleaning active agent, and
airing for 5 to 30 min, finally coat the sealing agent.
Notice: no breakage should be allowable at the sealing glue
seam when coating.
Recommended sealing agent for use:
(SF)
Glass glue TS-100 PVC windshield glue
Priming paint TS-5028
Cleaning active agent TS-7016
(SL SK SY SJ)
Glass glue TEROSTAT-8590 windshield glue
Priming paint TEROSTAT-8511
(d) Clean the body windshield open completely with cotton cloth to
coat the priming glue, airing for 5 min or so, and then stick the
front windshield to the windshield open.
(e) Fix the left/right trim strip of front windshield at the edges of
windshield open.
(f) Fix the lower trip strip of front windshield with screw at the
clipes of lower glass edge. (SF)
(g) Stick the upper edge of front windshield to the body with
transparent adhesive strip so as to prevent the glass from lowering.
