B0-17
Assembly of rear door
1. Coat the MP lubricant on the parts before mounting
(a) Coat the MP lubricant on the sliding face and gear of
glass elevator;
Notice: Do not coat the MP lubricant on the spring of
glass elevator.
(b) Coat the MP lubricant on the sliding face of door lock. Vehicle BodyRear Door
2. Mount the outdoor handle with lock barrel and door lock:
(a) Mount the lock barrel on the outdoor handle with spring
snapping ring.
(b) Mount the outdoor handle and the lock barrel with two
bolts;
(c) Mount the lock door with three screws; and
(d) Connect the connecting bar to the outdoor handle.
3. Mount the inside lock ring
Mount the inside lock ring and connect the connecting bar.
4. Mount the glass elevator:
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator (for manually-
operated elevator);
Mount four fixing bolts of elevator (for electric elevator)
(c) Mount the small sliding track and tighten the fixing bolts
temporarily;
(SJ)
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator;
(c) Mount four fixing bolts of elevator bracket.
SJ
SJ
B0-47Vehicle BodyTailgate
9. Tear down the tailgate lock
Tear down the three screws from the tailgate to tear down the
lock
Change of Glass
1. Tear down the glass bracket with screwdriver or with
similar tool.
2. Coat the polyurethane glue, seize the gasket on the
glass and coat the glass glue at outside of the gasket.
3. Encase the glass bracket by tapping it with rubber
hammer.
Tailgate Assembly of
Assembly the tailgate in the reverse order of the disassembly
approaches.
Notice: coat the lubricant on the sliding face, elevator
gear and door lock before mounting the parts.
120mm
105mm
outside
