2006 GMC YUKON buttons

A.DomeLampOverrideButton
B.HeadlampControls
C.AirOutlets
D.AutomaticTransferCaseButtons,
RearWindowWiper/Washer
Control,andFogLampsButton
E.TurnSignal/MultifunctionLever
F.InstrumentPanelClusterG.GearshiftLever
H.Tow/HaulSelectorButton
I.AudioSystem
J.ClimateControlSystem
K.InstrumentPanelFuseBlock
L.HoodRelease.
M.SteeringWheelControlButtons
N.CenterInstrumentPanelFuse
BlockO.TiltWheelLever
P.ParkingBrakeRelease
Q.CigaretteLighter(ifequipped)
R.AccessoryPowerOutlet
S.StabiliTrak
®DisableButton
T.GloveBox
Getting to Know YourYukon/Yukon Denali2
InstrumentPanel
SeeSection3ofyourOwnerManual.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 2

7
Entertainment Systems —
Radio/CD
Set the time on radios
withouta
Radio Data System (RDS)
• Press and hold the HR or MIN arrow
for two seconds.
• Press the HR (down) arrow until the
correct hour appears on the display.
•Press and hold the MIN (up) arrow
until the correct minute appears on
the display.
Set the time on radios withaRadio
Data System (RDS)
Your radio may have a button marked
“H” or “HR” to represent hours and an
“M” or “MIN” to represent minutes.
• Press and hold the hour button until
the correct hour appears on the
display.
• Press and hold the minute button
until the correct minute appears on
the display.
Program radio station presets
• Turn the radio on.
•Press BAND to select the band
(AM/FM1/FM2/XM1/XM2).
•Use the seek button or tune knob to
tune in the desired station.
• Press AUTO EQ or AUTO TONE (as
applicable to your radio) to select the
equalization that best suits the type of
station selected.
• Press and hold one of the six num
bered buttons until a beep sounds;
release the button.
•Repeat these steps for each station
preset, using a different numbered
button for each station.
Access one of the two available XM
Satellite Radio bands (if equipped)
• Press the BAND button until XM1 or
XM2 appears on the display.
Note:The time may be set with the
ignition on or off.
Note:Requires subscription to XM
Radio.
To use the rear seat controls, the front
fan control knob must be in the AUX
position.
On the rear seat control panel, press the
mode button ( ) and select AUTO if
you want the system to regulate airflow.
See Section 3 of your Owner Manual.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 7

9
Universal Home Remote
(if equipped)Rear Seat Entertainment System
(if equipped)
Program the Universal Home Remote
1.Determine which of the three chan
nels (buttons) you want to program
for functions such as a garage door
opener, gate opener or entry door
locks.
2. Press and hold the desired remote
button through step 3.
3. When the remote light blinks slowly
(within 30 seconds), hold your trans
mitter/opener 1" to 3" from the remote
buttons. Then hold your transmitter
button on until the remote light flash
es rapidly (up to 90 seconds). The
process is now complete.
See Section 2 of your Owner Manual.
The DVD Rear Seat Entertainment
(RSE) system includes a DVD player
and a video display screen (located in
the overhead console), two sets of wire
less headphones and a remote control.
To play a DVD:
•The ignition must be in the Run or
Accessory position, or RAP(Retained
Accessory Power,available after the
ignition is turned off) must be active.
•Push forward on the release latch to
fold down the video screen.
• Insert a DVD into the loading slot;
it will automatically start.
•If a DVD is already loaded, press the
Play/Pause button.
•Press the CD/AUX button on the
radio until RSE appears on the radio
display to listen to the DVD through
your vehicle speakers.
•When using the wireless head
phones, turn the headphones on and
adjust the volume using the volume
knob.
Note:If your transmitter has a “rolling
code” feature, this process may not
work. Please refer to your Owner
Manual.
turnbyturn instructions for reaching
your destination. In addition, the system
can help you locate banks, airports,
restaurants, post offices, ATMs and
more.
See your Owner Manual or Navigation
Entertainment System Quick Reference
Guide for operating instructions.
See Section 3 of your Owner Manual.
To stop or eject a DVD:
•To stop playing a DVD, press the
Stop button. Press the Play button to
resume viewing. If the Stop button is
pressed twice, the DVD will resume
viewing at the beginning.
•To eject a DVD, press the Eject but
ton on the DVD player.
See Section 3 of your Owner Manual.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 9

11
Program HomeLink
1. Determine which of the three chan
Adjustable Pedals
(if equipped)
The buttons used to
adjust the pedals are
located on the driver’s
side door panel.
• Press the button
closest to you to
move the pedals closer to your body.
• Press the button farthest from you to
move the pedals away from your
body.
The vehicle must be in Park (P) for this
feature to operate.
SeeSection 2 of your Owner Manual.
Cruise Control (if equipped)
Cruise control allows you to maintain a
constant speed of 25 mph or more with
out keeping your foot on the accelerator
pedal.
Setting Cruise Control:
1. Move the cruise control switch to On ().
2. Attain the speed you want to
cruise at.
3.Press in the Set button
( )at the
end of the multifunction lever on the
left side of the steering column.
4. Take your foot off the accelerator
pedal.
5. The cruise symbol on the instrument
cluster will illuminate.
There are two ways to increase speed
while cruising:
•Use the accelerator pedal to get to a
higher speed. Press at the end of
the multifunction lever to set the
cruising speed. Release the accelera
tor pedal.
•Press the resume/accelerate switch
(
+)to get to a higher speed, and then
release the switch.
To reduce speed while cruising:
See Section 3 of your Owner Manual.
YukonYukonDenali 06 Beta3 5/19/05 10:04 AM Page 11