Downloaded from www.Manualslib.com manuals search engine Re-programming theunlocking function
You can change the unlockingfunction so that pressing the unlockbutton once deactivates the centrallocking or double locking, disarmsthe anti-theft alarm system andunlocks the driver’s door. Pressingthe unlock button twice within threeseconds also unlocks thepassengers’ doors.
If you want the tailgate to be lockedwhile driving, press the locking buttonon the driver’s door to activatecentral locking.
In order to re-programme thefunction, press and hold the unlockand lock buttons simultaneously forat least four seconds with the ignitionswitched off. The direction indicatorswill flash twice to indicate that theunlocking function has beensuccessfully re-programmed.
Pressing and holding both buttonssimultaneously for at least fourseconds again will change thefunction back.
CHANGING THE REMOTE
CONTROL BATTERY
If the range of the transmitter in thekey decreases gradually, the battery(type 3V CR 2032) should bereplaced.
•Carefully seperate the transmitterunit from the key using a flatobject (e.g. a screwdriver) at therecess on the back.
•Carefully prise out the battery withthe flat object. Fit the new batterybetween the contacts with the +sign facing downwards.Reassemble the transmitter unitin reverse order.
•Open the transmitter unit byseperating the retaining clips onthe sides with the flat object.
33
Keys and remote controlsE72190 E68726 E68727
Downloaded from www.Manualslib.com manuals search engine •Connect the positive (+) terminalof the flat battery A to the positive(+) terminal of the booster batteryB.
•Connect the negative (−) terminalof the booster battery B as faraway from the battery as possibleto the engine block or the enginemount of the engine to be started.Do not connect to thenegative (–) terminal of theflat battery.
•Make sure that the booster cablesare clear of any moving parts.
To start the engine
•Run the engine of the vehicle withthe booster battery at moderatelyhigh speed.
•Start the engine of the vehicle withthe flat battery.
•Run both vehicles for a minimumof 3 minutes before disconnectingthe leads.
WARNING
Do not switch on the headlampswhen disconnecting the cables.The peak voltage could blow thebulbs.
•Disconnect the cables in thereverse order.
159
Vehicle battery
