2006 FORD GALAXY engine

Move\fthe\ftiming\fbelt\ftensioner\f\bdjustment\f\brm\fto\f
the\f3\fo'clock\fposition.\f

Do\fnot\ffully\ftighten\fthe\ftiming\fbelt\ftensioner\f
re

t\bining\fbolt\f\bt\fthis\fst\bge.\f
7. \f\f

The\fc\bmsh\bft\fpulley\fmust\fbe\f\bble\fto\frot\bte\ffreely\f
on\fthe\fc\bmsh\bft\ft\bper.\fTighten\fthe\fc\bmsh\bft\f
pulley\fbolt\ffinger\ftight\f\bnd\fthen\floosen\fby\fone
h\blf\fturn.\f\f


Inst\bll\fthe\ftiming\fbelt\fwith\fthe\fdirection\f\brrows\fin\f
the\fdirection\fof\fengine\frot\btion.\f
8. Tension\fthe\ftiming\fbelt\fcounterclockwise\funtil\fthe\f
pointer\fis\fpositioned\fbetween\fthe\fsides\fof\fthe\fwindow.\f
Torque: 50\fNm\f
9. S\fecial Tool(s): 205-072\f
Tor

que: 50\fNm
\f
10. Remove\fthe\fspeci\bl\ftools.\f S\fecial Tool(s): 303-376B,\f303-193,\f303-393\f
11 .

\f\f 1.
Rot\bte\fthe\fcr\bnksh\bft\f2\frevolutions.\fRepl\bce\fthe\f
Timing\fPeg\fjust\fbefore\fTDC\fon\fthe\fsecond\f
revolution.\f
S\fecial Tool(s): 303-193\f
2.
Rot\bte\fthe\fcr\bnksh\bft\fslowly\funtil\fthe\fcr\bnksh\bft\f
stops\f\bt\fTDC.\f
12. Check\fth\bt\fthe\ftiming\fbelt\ftensioner\fpointer\fis\f positioned\fin\fthe\fwindow,\fotherwise\fthe\ftiming\fbelt\f
tensioning\fsteps\fmust\fbe\frepe\bted.\f\f
13. NOTE:\fIf\fthe\fspeci\bl\ftool\fc\bnnot\fbe\finst\blled,\fthe\f
t
i

ming\fbelt\ftensioning\fsteps\fmust\fbe\frepe\bted.\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 12 из
19
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543577&gui...procarmanuals.com
http://vnx.su

39.Torque: 10\fNm\f
40. Torque: 23\fNm
\f
41. Torque: 24\fNm
\f
42. Inst\bll\fthe\fAir\fCle\bner.\f Refer\fto:\f Air\fCle\bner \f(303-
12D\fInt\bke\fAir\fDistribution\f
\bnd\fFiltering\f-\f1.8L\fDur\btorq-TDCi\f(74kW/100PS)\f-\f
Lynx/1.8L\fDur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
43. Connect\fthe\fb\bttery\fground\fc\bble.\f Refer\fto:\f B\bttery\fDisconnect\f\bnd\fConnect\f(414-01\f
B\btt

ery,\fMounting\f\bnd\fC\bbles,\fGener\bl\fProcedures).
\f
44. Refer\fto:\f Door\fWindow\fMotor\fIniti\bliz\btion \f(501-11\f
Gl\bss,\fFr\bmes\f\bnd\fMech\bnisms,\fGener\bl\fProcedures).
45. Ch\bnge\fthe\fengine\foil\f\bnd\fthe\foil\ffilter.\f
Material: Engine\fOil\f-\f5W-30\f(WSS-M2C912-A1) \f
46.

Bleed\fthe\fcooling\fsystem.\f
Refer\fto:\f
Cooling\fSystem\fDr\bining,\fFilling\f\bnd\fBleeding
(303-03D\fEngine\fCooling\f-\f1.8L\fDur\btorq-TDCi\f
(74kW/100PS)\f-\fLynx/1.8L\fDur\btorq-TDCi\f
(92kW/125PS)\f-\fLynx,\fGener\bl\fProcedures).\f
47. \f
\f\f
\f\f
\f\f
Стр. 18 из
19
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543577&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Oil Pan
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Mat

erials
Removal
205-047\f
Slide\fH\bmmer\f
303-633\f
Ad\bpter\ffor\f205-047
\f
NameSpec\bf\bcat\bo\f
Engine\fOil\f-\f5W-30WSS-M2C912-A1
Silicone\fSe\bl\bnt\fLBWSE-M4G323-A4\f/\f2U7J-M4G323-AA 1. Refer\fto:\fLifting\f(100-02\fJ\bcking\f\bnd\fLifting,\f
Des

cription\f\bnd\fOper\btion).\f
2. \f
3. NOTE:\fThe\fse\bl\fis\fto\fbe\freused\funless\f
d
\b

m\bged.\f
Dr\bin\fthe\fengine\foil\finto\f\b\fsuit\bble\fcont\biner.\f
4. C

AUTION:\fT\bke\fextr\b\fc\bre\fnot\fto\f
d\b

m\bge\fthe\fm\bting\ff\bces.\f
Special\bTool(\f):\b 30
3-633,\f205-047\f
\f
\f
\f\f
\f\f
Стр. 1 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543578&gui...procarmanuals.com
http://vnx.su

Installation 1.NOTE:\fM\bke\fsure\fth\bt\fthe\fm\bting\ff\bces\f\bre\f
cl

e\bn\f\bnd\ffree\fof\fforeign\fm\bteri\bl.\f
2. CAUTION:\fM\bke\fsure\fth\bt\fno\fexcess\f
se

\bl\bnt\fresidue\fis\fevident.\f
NOTE:\fThe\fcomponent\fmust\fbe\finst\blled\f
within\f5\fminutes\fof\f\bpplying\fthe\fse\bl\bnt.\f Apply\f\b\f2.5\fmm\fdi\bmeter\fbe\bd\fof\fse\bl\bnt\fto\fthe\f
ed
ge\fof\fthe\fOil\fP\bn.\f
Material:\b Silicone\fSe\bl\bnt\fLB\f(WSE-M4G323-A4\f/\f
2U 7

J-M4G323-AA) \f
3. Tighten\fthe\fOil\fP\bn\fret\bining\fnuts\f\bnd\fbolts\fin\f
the\fsequence\fshown.\f\f
Torque:\b 1-18\f\f 6.5\fNm
\f
14\fNm
\f
19\f36\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
4. \f
5. Fill\fthe\fengine\fwith\fengine\foil.\f
\f
\f\f
\f\f
\f\f
Стр. 2 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543578&gui...procarmanuals.com
http://vnx.su

Material:\bEngine\fOil\f-\f5W-30\f(WSS-M2C912-A1) \f
Стр. 3 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543578&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Crankshaft
Rear Seal
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Removal
NO

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
Installation
303-393\f
Locking\fTool,\fFlywheel
\f
1. Remove\fthe\fclutch\fdisc\f\bnd\fpressure\fpl\bte.\f Refer\fto:\f Clutch\fDisc\f\bnd\fPressure\fPl\bte \f(308-
01A

\fClutch\f-\fVehicles\fWith:\f5-Speed\fM\bnu\bl\f
Tr\bns\bxle\f-\fMTX75,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. Disc\brd\fthe\fflywheel\fret\bining\fbolts.\f
Special\bTool(\f):\b 303-393\f
Tor

que:\b \f
35\fNm
\f
45
°\f
St\bge\f1:\f
St\bge\f2:\f
3. Disc\brd\fthe\fcr\bnksh\bft\fre\br\fse\bl\fc\brrier.\f
1. NOTE:\fNew\fcr\bnksh\bft\fre\br\fse\bl\fc\brriers\f\bre\f
s
u

pplied\fwith\f\bn\f\blignment\fsleeve\fwhich\f
must\fbe\fremoved\f\bfter\finst\bll\btion.\f
Torque:\b 20\fNm
\f
2. Inspect\fthe\fflywheel.\f Refer\fto:\f M\bnu\bl\fTr\bns\bxle\f\bnd\fClutch \f(308-00\f
M\bn u

\bl\fTr\bnsmission/Tr\bns\bxle\f\bnd\fClutch\f-\f
\f
\f\f
\f\f
\f\f
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543579&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi
(92kW/\b25PS) - Lynx - Engine—Vehicles With: 5-
Speed Manual Transaxle
(MTX-75)
Removal
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
WARNING: Make sure that the fuel pressure has dropped to zero and that the fuel temperature is at ambient temperature.
Cable ties
Vehicle/axle stands
1. Refer \bo: D\fesel Fuel Sys\bem Heal\bh and Safe\by Precau\b\fons
2.
3. Remove \bhe a\fr cleaner. Refer \bo: A\fr Cleaner (303-
12D In\bake A\fr D\fs\br\fbu\b\fon and F\fl\ber\fng
Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
4. Remove \bhe ba\b\bery.
Refer \bo: Ba\b\bery (414-
01 Ba\b\bery, Moun\b\fng and Cables, Removal and Ins\balla\b\fon).
5.
6. Dra\fn \bhe cool\fng sys\bem.
Refer \bo:
Cool\fng Sys\bem Dra\fn\fng, F\fll\fng and Bleed\fng
Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, General Procedures).
7.



Стр. 1 из
6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543580&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi
(92kW/\b25PS) - Lynx - Engine—Vehicles With: 6-
Speed Manual Transaxle
(MMT6)
Removal
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
WARNING: Make sure that the fuel pressure has dropped to zero and that the fuel temperature is at ambient temperature.
Cable ties
Vehicle/axle stands
1. Refer \bo: D\fesel Fuel Sys\bem Heal\bh and Safe\by Precau\b\fons
2.
3. Remove \bhe a\fr cleaner. Refer \bo: A\fr Cleaner (303-
12D In\bake A\fr D\fs\br\fbu\b\fon and F\fl\ber\fng
Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
4. Remove \bhe ba\b\bery.
Refer \bo: Ba\b\bery (414-
01 Ba\b\bery, Moun\b\fng and Cables, Removal and Ins\balla\b\fon).
5.
6. Dra\fn \bhe cool\fng sys\bem.
Refer \bo:
Cool\fng Sys\bem Dra\fn\fng, F\fll\fng and Bleed\fng
Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, General Procedures).
7.



Стр. 1 из
6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852039&gui...procarmanuals.com
http://vnx.su