2006 FORD E SERIES high beam

[x] Cancel search: high beam

Page 15 of 248

FORD E SERIES 2006 4.G Owners Manual Check gauge:Illuminates when any
of the following conditions has
occurred:
•The engine coolant temperature
is high.
•The engine oil pressure is low.
•Flashes when Failsafe cooling mode has been

Page 34 of 248

FORD E SERIES 2006 4.G Owners Manual Daytime running lamps (DRL) (if equipped)
Turns the headlamps on with a reduced output.
To activate:
•the ignition must be in the ON position,
•the headlamp control is in the OFF or parking lamp p

Page 36 of 248

FORD E SERIES 2006 4.G Owners Manual 3. Turn on the low beam headlamps
and open the hood.
4. Locate the high intensity area of
the beam pattern and place the top
edge of the intensity zone even with
the horizontal reference line (4). If

Page 37 of 248

FORD E SERIES 2006 4.G Owners Manual 8.
•Aerodynamic:Locate the horizontal adjuster (1) for each headlamp.
Turn it clockwise or counterclockwise, to place the left edge of the
high intensity area even with the vertical line correspondi

Page 39 of 248

FORD E SERIES 2006 4.G Owners Manual Function Number of
bulbsTrade number
Headlamps (sealed
beam)2 H5054
Headlamps
(aerodynamic)2 9007
Park lamp and turn
signal (front)2 4157K or 3157K
Back-up lamps 2 3156K or 3156
License plate lamp 1 1

Page 162 of 248

FORD E SERIES 2006 4.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
8 30A Radio capacitor(s), Ignition coil,
Powertrain Control Module (PCM)
diode, PCM power relay
9 5A Wiper control module

Page 245 of 248

FORD E SERIES 2006 4.G Owners Manual F
Fail safe cooling ........................211
Fluid capacities .........................230
Four-Wheel Drive vehicles
preparing to drive your
vehicle .....................................141
Fuel ..