Page 237 of 274
236
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
INTERIOR PLASTIC PARTS
For routine cleaning of interior plastic
parts use a soft cloth moistened with wa-
ter and neutral soap. Remove grease or
persisting stains using appropriate solvent-
free products designed to preserve ap-
pearance and colour of plastic compo-
nents.
IMPORTANT Never use spirit or petro-
leum to clean the instrument panel.STEERING WHEEL/GEAR LEVER
KNOB WITH GENUINE
LEATHER COVERING
These components shall only be cleaned
with water and neutral soap. Never use
spirit or alcohol-based products.
Before using special products for clean-
ing interiors, read carefully label instruc-
tions and indications to make sure they
are free from spirit and/or alcohol-based
substances.
If when cleaning the windscreen with spe-
cial glass products, some drops fall on the
leather covering of the steering wheel/gear
lever knob remove them immediately and
then clean with water and neutral soap.
IMPORTANT Take the utmost care when
engaging the steering lock to prevent
scratching the leather covering.
Do not keep aerosol cans in
the car: they might explode.
Aerosol cans must never be exposed
to a temperature above 50°C. The
temperature inside the car exposed
to the sun may go well beyond that
figure.
WARNING
Never use flammable prod-
ucts like oil ether or rectified
petrol for cleaning car interiors. Elec-
trostatic discharges generated by rub-
bing during cleaning operations could
cause fire.
WARNING
Page 238 of 274
237
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IDENTIFICATION DATA ................................................... 238
ENGINE CODES - BODYWORK VERSIONS .............. 240
ENGINE .................................................................................... 241
FUEL FEED/IGNITION ........................................................ 243
TRANSMISSION .................................................................... 243
BRAKES ..................................................................................... 244
SUSPENSIONS......................................................................... 244
STEERING ................................................................................. 244
WHEELS .................................................................................... 245
DIMENSIONS .......................................................................... 250
PERFORMANCE ..................................................................... 253
WEIGHTS ................................................................................. 254
CAPACITIES ........................................................................... 257
FLUIDS AND LUBRICANTS ............................................... 259
FUEL CONSUMPTION ........................................................ 261
CO
2EMISSIONS .................................................................... 263
T T
E E
C C
H H
N N
I I
C C
A A
L L
S S
P P
E E
C C
I I
F F
I I
C C
A A
T T
I I
O O
N N
S S
Page 239 of 274
MODEL PLATE fig. 2
The plate is to be found on the front
crossmember of the engine compartment
and bears the following identification da-
ta:
AManufacturer’ name.
BHomologation number.
CVehicle type code.
DChassis number.
EMaximum vehicle weight fully loaded.
FMaximum vehicle weight fully loaded
with trailer.GMaximum vehicle weight on front axle.
HMaximum vehicle weight on rear axle.
IEngine type.
LBody version code.
MSpare part code.
NSmoke opacity index (for diesel en-
gines).
IDENTIFICATION DATA
You are advised to note the identification
codes. The identification data stamped and
given on the plates and their position are
the following fig. 1:
❒ Model plate
❒Chassis marking
❒Bodywork paint identification plate
❒Engine marking.
238
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
fig. 1F0C0195mfig. 2F0C0099m
Page 240 of 274
BODYWORK PAINT
IDENTIFICATION PLATE fig. 4
The plate is applied inside the bonnet and
it bears the following data:
A- Paint manufacturer.
B- Colour name.
C- Fiat colour code.
D- Respray and touch up code.ENGINE MARKING
Engine marking is stamped on the cylinder
block and includes the model and the
chassis number.
CHASSIS MARKING fig. 3
It is printed on the passenger compart-
ment floor, near the right-hand front seat.
It can be reached by lifting the special flap
in the carpeting and includes the following
data:
❒car model (ZFA 192000);
❒ chassis number.
239
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
fig. 4F0C0100m
fig. 3F0C0110m
Page 241 of 274
240
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
(*) “DYNAMIC” saloon versions (**) Versions for specific markets
(▲) Multi Wagon “ACTUAL” versions (❍) Multi Wagon versions
(■) Versions with mechanical gearbox (❒) Selespeed versions
ENGINE CODES - BODYWORK VERSIONS
Engine codeBody version
3-door 5-door
192AXH1B 21192BXH1B 22
1.4
16V843A1000
192AXH1B 21B (*)192BXH1B 22B (*)192CXH1B 23 (❍)
192AXN1B 30192BXN1B 31
1.4
16V (**)192B2000
192AXN1B 30B (*)192BXN1B 31B (*)192CXN1B 32 (❍)
192BXR1A 37
1.6
16V192B3000 192AXR1A 36
192CXR1A 38 (❍)
1.816V192A4000 192AXC1A 04192BXC1A 05192CXC1A 13 (❍)
2.4
20V192A2000192AXD1A 16C (■) 192BXD1A 17C (■)192AXD12 06C (❒) 192BXD12 07C (❒)
1.9 Multijet
8V192A8000 192AXS1A 039B192BXS1A 40B192CXS1A 41B (❍)
1.9 Multijet
8V(**) 192B4000 192AXU1A 45192BXU1A 46192CXU1A 47 (❍)
1.9 Multijet
16V937A5000 192AXT1B 42192BXT1B 43192CXT1B 44 (❍)
Page 242 of 274
241
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
ENGINE
GENERAL
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
1.416V
843A1000
Otto
4 in line
72.0 x 84.0
1368
11.2
70
95
5800
128
13
4500
NGK
DCPR7E-N
Unleaded petrol
95 RON
(Specification
EN228)
1.416V (*)
192B2000
Otto
4 in line
72.0 x 84.0
1368
11.2
66
90
5500
128
13
4500
NGK
DCPR7E-N
Unleaded petrol
95 RON
(Specification
EN228)
1.616V
192B3000
Otto
4 in line
79 x 81.5
1598
10.5
77
105
6200
150
15.3
3900
Bosch
FQR 8 LEU 2
Unleaded petrol
95 RON
(Specification
EN228)
1.816V
192A4000
Otto
4 in line
82.0 x 82.7
1747
10.3
98
133
6400
162
16.5
3500
NGK BKR6EZ
Champion
RC10YCC
Unleaded petrol
95 RON
(Specification
EN228)
2.420V
192A2000
Otto
5 in line
83 x 90.4
2446
10.5
125
170
6000
221
22.5
3500
Champion
RC8BYC
Unleaded petrol
95 RON
(Specification
EN228)
(*) Version for specific markets
Page 243 of 274
242
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
(*) Version for specific markets
GENERAL
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Fuel
1.9 Multijet 8V
192A8000
Diesel
4 in line
82.0 x 90.4
1910
18
88
120
4000
255
26
2000
Diesel fuel for
motor vehicles
(Specification EN590)
1.9 Multijet 16V
937A5000
Diesel
4 in line
82.0 x 90.4
1910
17.5
110
150
4000
305
31
2000
Diesel fuel for
motor vehicles
(Specification EN590)
1.9 Multijet 8V (*)
192B4000
Diesel
4 in line
82.0 x 90.4
1910
18
85
115
4000
255
26
2000
Diesel fuel for
motor vehicles
(Specification EN590)
1.9 Multijet 16V (*)
Diesel
4 in line
82.0 x 90.4
1910
17.5
100
136
4000
305
31
2000
Diesel fuel for
motor vehicles
(Specification EN590)
Page 244 of 274
243
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FUEL FEED/IGNITION
1.416V- 1.616V- 1.816V- 2.420V1.9 Multijet 8V- 1.9 Multijet 16V
Fuel feedMultipoint sequential phased Direct injection with electronically
electronic injection, returnless system controlled Multijet “Common Rail”turbosupercharger and intercooler
TRANSMISSION
1.416V2.420V1.616V - 1.816V1.9 Multijet16V1.9 Multijet 8V
Gearbox
Clutch
Drive
Modifications or repairs to the fuel system that are not carried out properly or do not take the system’s techni-
cal specifications into account can cause malfunctions leading to the risk of fire.
Six forward gears
and reverse
with synchromesh for
forward gear
engagement
Self-adjusting pedal
without idle
stroke
FrontFive forward gears
and reverse
with electronic
control system
Electric-hydraulic
device with
electronic control
FrontFive forward gears
and reverse
with synchromesh
for forward gear
engagement
Self-adjusting pedal
without idle
stroke
FrontSix forward gears
and reverse
with synchromesh
for forward gear
engagement
Self-adjusting pedal
without idle stroke
Front
