MAINTAINING YOUR VEHICLE 261
7
Hydraulic Brake System, Clutch Mechanism Fluid
Level
1. Brake fluid reservoir
Brake fluid level must be between the MIN and MAX
marks in the reservoir (1).
If the brake fluid is below the MIN mark, there may be
a fault in the hydraulic system. Have the system
checked as soon as possible by an authorized Sprinter
Dealer.Brake fluid
Refer to the "Recommended Fluids" chart later in this
section for recommended brake fluids.
In the course of its service life, the boiling point of the
brake fluid will fall due to the continuous absorption of
moisture from the atmosphere.
If the brakes are placed under heavy loads (e.g., on
steep hills) bubbles of steam can then form in the brake
system.
This will adversely affect the brakes' effectiveness.
Engine Cooling System
The use of aluminum components in Sprinter engines
requires that anticorrosive/antifreeze specifically
formulated to protect aluminum parts be used. The
factory approved Service Products are suitable for
Sprinter engines and can be mixed with the original
anticorrosion/antifreeze filled in at factory.
Cooling system design and anticorrosion/antifreeze
agent used stipulate the replacement interval for the
coolant solution in your vehicle. Please observe the
replacement interval specified in the Service Booklet
for your vehicle.
300 MAINTAINING YOUR VEHICLE
COMPONENT SERVICE
INTERVALPRODUCT NAME/PRODUCT NUMBER MB
SHEET
Air Conditioning
The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the
upper atmosphere.
Refrigerant R-134a — Refrigerant R-134a 361.0
Automatic
Transmission Fluidonce only at
80,000 mi
(128,000 km)Shell ATF 3403/M-115
MOPAR® Part No. 05127382AA, or equivalent
Fuchs/Shell ATF 3353236.10
236.12
Brakes
Use brake fluid approved to DaimlerChrysler standard MB 331.0 and/or DaimlerChrysler material standard MS-9971,
brake fluid certified to DOT 4 Plus standards, that also maintains a minimum dry boiling point (ERBP) of 500°F (260°C),
a minimum wet boiling point (WERBP) of 356°F (180°C) and maximum viscosity of 1500 mm
2/s, conforming to FMVSS
116 and ISO 4925.
Brake Fluid 2 years Intac B026D Dry boiling point: 500°F (260°C)
Wet boiling point: 356°F (180°C),
MOPAR® MS-9971 Part No. 04549625AC, or equivalent331.0
Engine Oil 12 months or
10,000 mi
(16,000 km)See "Approved Engine Oils"
318 INDEX
ASSYST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
ASSYST Maintenance Computer . . . . . . . . . . . . . . . 112
Automatic Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic Transmission . . . . . . . . . . . . . . . . . . . . . . 148
Accelerator Position . . . . . . . . . . . . . . . . . . . . . . . . 149
Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Gear Selector Lever Position . . . . . . . . . . . . . . . . . 150
Maneuvering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Selector Lever Manually Unlocking. . . . . . . . . . . 153
Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Auxiliary Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Auxiliary Heat Exchanger . . . . . . . . . . . . . . . . . . . . . 139
Auxiliary Heater
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Timer Auxiliary Heater (Water and Air Heater) 134
Tips for Coping with Problems . . . . . . . . . . . . . . 140
BBatteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . 267
Disconnecting the Battery . . . . . . . . . . . . . . . . . . . 266
Reconnecting the Battery . . . . . . . . . . . . . . . . . . . . 266
Replacing Batteries in Remote Keyless Entry . . . . 22Battery Charge Indicator Lamp . . . . . . . . . . . . . . . . . 106
Belt Tensioners
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Belt Tensioners and Airbag . . . . . . . . . . . . . . . . . . . . . 49
Bleeding the Diesel Fuel System . . . . . . . . . . . . . . . . 216
Body Builder Guideline . . . . . . . . . . . . . . . . . . . . . . . 229
Brake Assist System (BAS) . . . . . . . . . . . . . . . . . . . . . 172
Brake fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Brake Fluid Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . 261
Brake Indicator Lamp . . . . . . . . . . . . . . . . . . . . . . . . . 160
Brake Pad Wear Indicator. . . . . . . . . . . . . . . . . . . . . . 159
Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Fluid Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Brake System, Anti-Lock . . . . . . . . . . . . . . . . . . . . . . 165
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Service Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Bulbs
Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 284
Front Lamp Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
CCapacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296