²Make sure that the radiator and coolant recovery
bottle overflow hoses are not kinked or obstructed.
²Keep the front of the radiator clean. If your vehicle is
equipped with air conditioning, keep the front of the
condenser clean, also.
²Do not change the thermostat for summer or winter
operation. If replacement is ever necessary, install
ONLY the correct type thermostat. Other designs may
result in unsatisfactory coolant performance, poor gas
mileage, and increased emissions.
Hoses And Vacuum/Vapor Harnesses
Inspect surfaces of hoses and nylon tubing for evidence
of heat and mechanical damage. Hard or soft spots,
brittle rubber, cracking, tears, cuts, abrasions, and exces-
sive swelling indicate deterioration of the rubber
Pay particular attention to the hoses nearest to high heat
sources such as the exhaust manifold. Inspect hose rout-
ing to be sure hoses do not touch any heat source or
moving component that may cause heat damage or
mechanical wear.Insure nylon tubing in these areas has not melted or
collapsed
Inspect all hose connections such as clamps and cou-
plings to make sure the are secure and no leaks are
present.
Components should be replaced immediately if there is
any evidence of degradation that could cause failure.
Fuel System Connections
Electronic Fuel Injection high pressure fuel systems are
designed with tubes and special connects, connections
and clamps which have unique material characteristics to
provide adequate sealing and resist attack by deterio-
rated gasoline.
You are urged to use only the manufactures-specified
tubes, connections and clamps, or their equivalent in
material and specification, in any fuel system servicing.
Brake System
In order to assure brake system performance, all brake
system components should be inspected periodically.
Suggested service intervals can be found in the Mainte-
nance Section.
260 MAINTAINING YOUR VEHICLE
Lumbar Support........................ 71
Maintenance Free Battery................. 251
Maintenance, General.................... 245
Maintenance Procedures.................. 245
Maintenance Schedule................... 282
Schedule ªAº........................ 294
Schedule ªBº........................ 285
Malfunction Indicator Light
(Check Engine)...................... 114,243
Manual, Service........................ 303
Manual Transaxle.................174,180,264
Downshifting........................ 182
Fluid Level Check..................264,265
Frequency of Fluid Change...........264,265
Lubricant Selection.................264,265
Map/Reading Lights..................... 77
Master Cylinder (Brakes)................. 262
Mirrors............................... 66
Electric Powered....................... 67
Outside............................. 66
Rearview............................ 66
Vanity.............................. 69Modifications/Alterations, Vehicle............ 6
Monitor, Tire Pressure System............. 206
Mopar Parts........................244,302
Multi-Function Control Lever............... 77
New Vehicle Break-In Period............... 59
Occupant Classification System (OCS)........ 43
Occupant Restraints (Sedan)................ 29
Octane Rating, Gasoline (Fuel)............. 211
Odometer............................. 114
Trip ............................. 114,115
Oil, Engine......................245,248,278
Capacity............................ 278
Change Interval...................... 246
Checking........................245,248
Disposal............................ 248
Filter.............................. 248
Materials Added to.................... 248
Recommendation..................247,278
Synthetic........................... 247
Viscosity............................ 247
Oil Pressure Light...................... 112
INDEX 315
10
