2006 CITROEN C4 screen

V
130 Windscreen and rear screen
washer fluid
For best results as well as for
your safety, use only CITROËN
approved products which protect
at temperatures as low as -25°C
to -30°C.
It is essential to have sufficient
screen wash fluid if your vehicle is
equipped with Xenon headlamps.
To check the level, place a finger
on aperture
A before removing
the cap.
Capacity: See “Capacities”. Brake fluid
The synthetic fluid not only gives protection against corrosion bu
t also
ensures correct functioning of the braking system in all environment al con-
ditions, therefore you should only use the synthetic product reco mmended
by the CITROËN network. (this fluid must be replaced every two years).
These important requirements are detailed in your vehicle’s maint enance
Guide.
Quality: See “maintenance Guide”.
When working under the bonnet, when the engine is hot
(even stopped and the ignition switched off),
the cooling fan could operate at any time.
Brake fluid reservoir
Check and top up at regular inter
-
vals.
The fluid level must be situated
within the MAX and MIN marks
visible on the reservoir.
If the warning lamp lights, stop
immediately and contact the near-
est CITROËN dealer.
L E V E L S

22
1
9
11
53
8
6724
10
D E S C R I P T I O N O F T H E C O N T R O L S
It is recommended that you do not use the NaviDrive controls while your vehicle is moving. In some countries, certain commands may be deactivated to comply with national regulations.
1CD eject.
2Call in progress:Shor t press: End a call.
3Shor t press: Answer call.Display of telephone menu.
4Shor t press: Access to the CITROËN ser vices menu.Long press: Direct call to the CITROËN assistance ser vice.
5CD aper ture.
6
Shor t press:Cancellation of the current operation.Deletion of a superimposed display.Long press:Close main menu and return to the welcome screen.

33
1314151612
D E S C R I P T I O N O F T H E C O N T R O L S
12
Rotate:Movement in the screen for choosing a function, a parameter or a value.Decrease or increase of data in the case of an adjustment.Scrolling of the elements to select from a list.Modifi cation of the scale of the map on the screen.

101010
I
e
abc
fgh
d
i
N A V I G A T I O N / G u I D A N C E
G E N E R A L
The Multifunction screenDuring a guidance, you have access to the following types of information:
a manœuvre to be made, or direction to be taken.b Distance to the next manoeuvre.c Next manoeuvre to be made.d N ex t r o a d t o b e t a ke n a n d n a m e o f town.e Symbol concerning Traffi c information or the services that are in proximity.f Road you are currently on, name of the town.g Estimated time of arrival at destination (based on fl owing traffi c).h Distance to fi nal destination.i Altitude.
Apart from on the screen, the manœuvres t o b e m a d e a r e a n n o u n c e d by a vo i c e synthesiser.
Repeating the last piece of voice infor-mationA few seconds after enunciation of a guid-ance voice instruction, you have the pos-sibility of hearing it again.Keep the end of the lighting control stalk pressed.
How to adjust the volume for the voice instructions ?While a voice instruction is being spoken, press on the volume adjustment but ton c ontrols either on the system or on the steering wheel.Adjustment is also possible in the “Confi gu-ration” menu.
DESCRIPTION OF THE TYPES OF INFORMA -TION DISPLAYED DURING NAVIGATIONTHE VOICE SYNTHESIS

181818
IIThe map menu lets you set parameters for the display and to access the information available on the map.The mapping data is stored directly on the hard disc of your NaviDrive.
Regular up d at es of t h e M ap d at aba se are availabl e. Cont ac t a CITRO ËN dealer.
m A P
G E N E R A L
DISPLAY OF THE MAP
Your NaviDrive allows you to select 2 types of displays for the map.
Window modeThe map is shown on the right of the screen.

191919
II
A1A2A3
ABCD
A1
A2
A3
C1
C2C2
C1
D
B
A
C
A
WHAT ARE THE FUNCTIONS OF THE MAP MENU ?
ORIENT THE MAP
Orient the map to the direction the vehicle is heade d.
Orient the map to the North.
View the map in perspective.
DISPLAY ON THE MAP THE DETAILS OF THE CENTRES OF INTEREST (POI) AVAILABLE (LIST PAGE 21)
MODIFY THE DISPLAY OF THE MAP
Display the map full screen.
Display the map on the right of the screen.
M OVE THE POINTER ON THE MAP
m A P
A C C E S S I N G T H E m E N u - S T R u C T u R E
H OW TO ACCESS THE MAP MENU ?
Press button mENu.

555555
IX
F R E Q u E N T LY - A S K E D Q u E S T I O N S
QUESTIONSANSWERSSOLUTIONS
The rec eption qualit y of the radio station being listened to gradually deteriorates.
The vehicle is too distant from the transmitter, or no transmitter is present in the geographical area you are passing th rough.
Activate the RDS function to allow the system to chec k whether a more power ful transmitter is to be found in the geographical area.
The environment (hills, high buildings, tunnels, underground car parks, etc.) is blocking reception, even in RDS mode.This phenomenon is normal and does not imply anythi ng wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).Have the aerial checked by a CITROËN dealer.
When the engine is not running, the radio stops after a few minutes.
When the engine is switched off, the working time fo r the radio depends on the batter y charge. The interruption is nor mal: the radio goes into economy mode, cutting off in order to save the vehicle’s batter y.
You have to star t the engine so as to increase the bat-ter y charge.
T h e m e s s a g e “ t h e a u d i o s y s t e m i s o v e r h e a t i n g ” a p p e a r s o n t h e screen.
In order to protect the audio equipment in excessiv e ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
Switch off the audio system for a few minutes in order to allow the system to cool down.
Why is one not informed in real time of a hold-up on the route even though the option for guidance by “traffi c info” is activated ?
When you star t up, the system takes a few minutes to c apture the traf fi c information via RDS-TMC.Wait for the traf fi c information to be safely received (pictogrammes displayed on the map) and make sure that you use the major ar terial roads to have “inform ed” navigation.
Only the major ar terial roads (motor ways and some d ual car-riageways) are featured in RDS-TMC traf fi c information).
It may happen that a hold-up is not repor ted by the tr af fi c info provider.
Why is a diversion not suggested when I have selected traf fi c info ?
Do not confuse the “traf fi c info” guidance option which can sug-gest a diversion (the “diver t” button appears in the w indow) with the menus “Display of traf fi c messages” or “Reading of traf fi c messages” which af fect only the display without recalculating the itinerar y (no “diver t” button in the window).
To have “informed” navigation with the detour proposi-tion, it is essential to activate the guidance option with “traf fi c info”.