2006 CHRYSLER PACIFICA load

Seats ................................106
▫ 10–Way Driver’s Power Seat — If Equipped . . 106
▫ 8–Way Driver’s Power Seat — If Equipped . . . 107
▫ 4–Way Passenger’s Power Seat ............107
▫ Adjustable Head Restraints ..............108
▫ Heated Seats — If Equipped .............108
▫ Second Row Manual Seat Recliner —
If Equipped .........................110
▫ Second Row Manual Seat Adjuster —
If Equipped .........................111
▫ Second Row Bench Seating — If Equipped . . . 112
▫ Second Row Fold & Tumble Seats —
If Equipped .........................113
▫ Third Row Easy Exit — If Equipped ........114 ▫
Third Row Seating — If Equipped .........116
▫ Load Floor — If Equipped ...............117
▫ Plastic Grocery Bag Retainer .............118

Driver Memory Seat — If Equipped .........119
▫ Easy Entry/Exit Seat (Available With Memory
Seat Only) ..........................122
▫ Tilt Mirrors In Reverse — If Equipped ......123

To Open And Close The Hood .............123

Lights ...............................125
▫ Overhead Console Map/Reading Lights .....125
▫ Interior Lights .......................126
▫ Multi-Function Lever ...................126
▫ Headlights, Parking Lights, Instrument Panel
Lights .............................126
76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

▫Courtesy/Reading Lights ................142
▫ Sunglasses Storage ....................142

Garage Door Opener — If Equipped .........142
▫ Programming HomeLink ................144
▫ Canadian Programming/Gate Programming . . 146
▫ Using HomeLink .....................147
▫ Erasing HomeLinkButtons ...............147
▫ Reprogramming a Single HomeLinkButton . . . 147
▫ Security ............................148

Power Sunroof — If Equipped .............149
▫ Express Open Feature ..................150
▫ Wind Buffeting .......................151
▫ Sunroof Maintenance ...................151

Electrical Power Outlets ..................152
▫ Electrical Outlet Use With Engine Off .......153

Cupholders ...........................154
▫ Front Seat Cupholders ..................154
▫ Second Row Seat Cupholders .............154
▫ Third Row Seat Cupholders — If Equipped . . . 155

Storage ..............................155
▫ Console Features ......................155
▫ Rear Cargo Storage Bin — If Equipped ......155
▫
Retractable Cargo Area Cover — If Equipped. . 156
▫ Cargo Tie-Down Hooks .................157

Roof Luggage Rack — If Equipped ..........158

Load Leveling System ...................160
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!
•Not all head restraints in this vehicle are the same.
Head restraints from one seating position should not
be removed and installed in any other seating posi-
tion. In a collision, serious injury or death may result
if the proper head restraint is not installed on each
seat.
•The cargo area in the rear of the vehicle should not
be used as a play area by children. They could be
seriously injured in a collision. Children should be
seated and using the proper restraint system.
•It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously
injured or killed.
•Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts.
•Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
Load Floor — If Equipped
For additional cargo space, the second and third row
seatbacks may be folded forward and the load floor
extended to cover the center console.
To extend the load floor, follow these steps:
1. Move the second row seats to the full rear position.
2. Fold the second and third row seatbacks down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117
3

3. Pull on the load floor strap and lift the panel from the
driver’s second row seatback over the center console and
onto the passenger second row seat.
NOTE: Be sure to reattach the strap to secure the load
floor panel when not in use.Plastic Grocery Bag Retainer
Retainer hooks which will hold plastic grocery bag
handles are built into the seatbacks of all front seats. The
floor supports the partial weight of the bagged goods.
Load Floor Panel
Grocery Bag Holders
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

A third outlet is located on the back of the front center
console near the floor, and is also controlled by the
ignition switch.
A fourth outlet is located on the driver’s side, in the rear
cargo area and is also controlled by the ignition switch.
The outlets include tethered caps labeled with a key or
battery symbol indicating the power source. The passen-
ger side instrument panel and center console outlets are
powered directly from the battery, items plugged into
these outlets may discharge the battery and/or prevent
engine starting.
The passenger side and center console outlets are protected
by an automatic reset circuit breaker. The automatic circuit
breaker restores power when the overload is removed.
NOTE:If desired, the fourth power outlet in the rear cargo
area can be converted by your authorized dealer to provide
power with the ignition switch in the OFF position.
Electrical Outlet Use With Engine Off
CAUTION!
•Many accessories that can be plugged in draw power from
the vehicle’s battery, even when not in use (i.e. cellular
phones, etc.). Eventually, if plugged in long enough, the
vehicle’s battery will discharge sufficiently to degrade
battery life and/or prevent engine starting.
•Accessories that draw higher power (i.e. coolers, vacuum
cleaners, lights, etc.), will degrade the battery even more
quickly. Only use these intermittently and with greater
caution.
•After the use of high power draw accessories, or long
periods of the vehicle not being started (with accessories
still plugged in), the vehicle must be driven a sufficient
length of time to allow the alternator to recharge the
vehicle’s battery.
•Power outlets are designed for accessory plugs only. Do not
hang any type of accessory or accessory bracket from the
plug. Improper use of the power outlet can cause damage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153
3

4. Grasp the center portion of the cover flap. Pull it over
the cargo area.
5. Insert the pins on the ends of the cover flap into the
slots on the rear trim panel.
6. The liftgate may be opened or closed with the cargo
cover in place.
Cargo Tie-Down Hooks
The tie-downs located on cargo area floor and on the rear
trim panels should be used to safely secure loads when
vehicle is moving.
WARNING!
•Cargo tie-down hooks are not safe anchors for a
child seat tether strap. In a sudden stop or colli-
sion a hook could pull loose and allow the child
seat to come loose. A child could be badly injured.
Use only the anchors provided for child seat
tethers.
•The weight and position of cargo and passengers
can change the vehicle center of gravity and
vehicle handling. To avoid loss of control result-
ing in personal injury, follow these guidelines for
loading your vehicle:
•Always place cargo evenly on the cargo floor. Put
heavier objects as low and as far forward as possible.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157
3

•Place as much cargo as possible in front of the rear
axle. Too much weight or improperly placed weight
over or behind the rear axle can cause the rear of the
vehicle to sway.
•Do not pile luggage or cargo higher than the top of the
seatback. This could impair visibility or become a
dangerous projectile in a sudden stop or collision.
WARNING!
To help protect against personal injury, passengers
should not be seated in the rear cargo area. The rear
cargo space is intended for load carrying purposes
only, not for passengers, who should sit in seats and
use seat belts.
ROOF LUGGAGE RACK — IF EQUIPPED
The crossbars and siderails are designed to carry the
weight on vehicles equipped with a luggage rack. The
load must not exceed 150 lbs (68 kg), and should be
uniformly distributed over the luggage rack crossbars.
Roof Rack
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Distribute cargo weight evenly on the roof rack crossbars.
The roof rack does not increase the total load carrying
capacity of the vehicle. Be sure the total load of cargo
inside the vehicle plus that on the external rack does not
exceed the maximum vehicle load capacity.
To move the cross bars, press the upper edge of each
cross bar button, then move the cross bar to the desired
position, keeping the crossbars parallel to the rack frame.
This is can be done with one person standing on each
side of the vehicle, moving the cross bar at the same time.
Once the cross bar is in place, press the lower edge of the
cross bar button to lock it into position. Attempt to move the crossbar again to ensure that it has
properly locked into position.
NOTE:
To reduce the amount of wind noise when the
cross bars are not in use, move both cross bars next to
each other towards the rear of the vehicle in the rear most
position.
The tie down holes on the cross bar ends should always
be used to tie down the load. Check the straps frequently
to be sure that the load remains securely attached.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159
3