2006 CHRYSLER 300 tow

[x] Cancel search: tow

Page 273 of 392

CHRYSLER 300 2006 1.G Owners Manual WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Flasher.................274
If Your Engine Overheats................274
Jacking And Tire Changing...............275
▫Preparations For Jacking....

Page 277 of 392

CHRYSLER 300 2006 1.G Owners Manual Jack Location/Spare Tire Stowage
The jack and spare tire are both stowed under an access
cover in the trunk. Follow these steps to access the jack
and spare tire.
NOTE:The spare tire must be removed i

Page 281 of 392

CHRYSLER 300 2006 1.G Owners Manual 7. Remove the lug nuts, wheel cover (if equipped) and
tire. Remove the cover by hand, do not pry off.
8. Mount the spare tire. For vehicles equipped with
wheel covers, see the wheel cover installation

Page 283 of 392

CHRYSLER 300 2006 1.G Owners Manual WARNING!
•Do not attempt to push or tow your vehicle to get
it started. Vehicles equipped with an automatic
transmission cannot be started this way. Un-
burned fuel could enter the catalytic convert

Page 286 of 392

CHRYSLER 300 2006 1.G Owners Manual WARNING!
Fast spinning tires can be dangerous. Forces gener-
ated by excessive wheel speeds may cause tire dam-
age or failure. A tire could explode and injure
someone. Do not spin your vehicle’s wh

Page 287 of 392

CHRYSLER 300 2006 1.G Owners Manual CAUTION!
•Do not attempt to tow this vehicle from the front
with sling type towing equipment. Damage to the
front fascia will result.
•The only approved method of towing is with a flat
bed truck.

Page 295 of 392

CHRYSLER 300 2006 1.G Owners Manual ONBOARD DIAGNOSTIC SYSTEM—OBD II
Your vehicle is equipped with a sophisticated onboard
diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and automatic
t

Page 300 of 392

CHRYSLER 300 2006 1.G Owners Manual CAUTION!
Overfilling or underfilling will cause oil aeration or
loss of oil pressure. This could damage your engine.
CAUTION!
Operating the engine with the oil levels below the
safe zone, or operating