2006 CHEVROLET UPLANDER lock

[x] Cancel search: lock

Page 390 of 458

CHEVROLET UPLANDER 2006  Owners Manual To release the spare tire from the secondary latch, do
the following:
1. Place the jack under the vehicle, ahead of the rear
bumper. Position the center lift point of the jack
under the center of the

Page 405 of 458

CHEVROLET UPLANDER 2006  Owners Manual Electrical System
Add-On Electrical Equipment
Notice:Don’t add anything electrical to your vehicle
unless you check with your dealer �rst. Some
electrical equipment can damage your vehicle and
the d

Page 406 of 458

CHEVROLET UPLANDER 2006  Owners Manual Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected from
short circuits by a combination of fuses, circuit breakers,
and fusible thermal links.
Look at the silver-colored band

Page 407 of 458

CHEVROLET UPLANDER 2006  Owners Manual Fuses Usage
1 Trunk, Door Locks
2 Electronic Level Control
3 Rear Wiper
4 Radio Ampli�er
5 Interior Lamps
6 OnStar
®
7 Keyless Entry Module
8Cluster, Heating, Ventilation, Air
Conditioning
9 Cruise S

Page 408 of 458

CHEVROLET UPLANDER 2006  Owners Manual Underhood Fuse Block
The underhood fuse block is located in the engine compartment. For more information on location
seeEngine Compartment Overview on page 5-12.
Your vehicle may not have all the fuse

Page 409 of 458

CHEVROLET UPLANDER 2006  Owners Manual Fuses Usage
1 Right High Beam
2 Fuel Pump
3 Diode
SPARE Spare
SPARE Spare
4 Left High Beam
SPARE Spare
SPARE Spare
SPARE Spare
5 Not Used
6 Air Conditioning Clutch
7 Horn
8 Left Low Beam
9Powertrain C

Page 410 of 458

CHEVROLET UPLANDER 2006  Owners Manual J-Case Fuses Usage
PLR Fuse Puller
29 Fan 1
30 Starter Solenoid
31 Anti-lock Brake System Motor
32 Blank
33 Fan 2
34 Front Blower High
35 Battery Main 3
36 Rear Defogger
37 Battery Main 2
38 SpareRela

Page 419 of 458

CHEVROLET UPLANDER 2006  Owners Manual Maintenance Footnotes
#Lubricate the suspension, steering linkage, transaxle
shift linkage, and the underbody contact points and
linkage.
(a)Visually inspect brake lines and hoses for proper
hook-up,