2006 CHEVROLET EXPRESS CARGO VAN seats

[x] Cancel search: seats

Page 1 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Seats and Restraint Systems........................... 1-1
Front Seats
............................................... 1-3
Rear Seats
............................................... 1-7
Safety Belts
.

Page 4 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Vehicle Damage Warnings
Also, in this manual you will find these notices:
Notice:These mean there is something that could
damage your vehicle.
A notice tells about something that can damage the
vehic

Page 7 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Front Seats......................................................1-3
Manual Seats................................................1-3
Power Seat...................................................1-4
Re

Page 8 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Airbag System...............................................1-66
Where Are the Airbags?................................1-68
When Should an Airbag Inflate?.....................1-69
What Makes an Airba

Page 9 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Front Seats
Manual Seats
{CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle
is moving. The sudden movement could startle
and confuse you, or

Page 11 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual The seats have manual reclining seatbacks. The lever
used to operate them is located on the inboard side
of the seats.
To recline the seatback, do the following:
1. Lift the recline lever.
2. Move the

Page 13 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual Rear Seats
Rear Seat Operation
Removing the Rear Seat
1. Disconnect the quick
release latch plates for
the lap shoulder belts
on the bench seat to be
removed. To do this,
press the tip of a key
into t

Page 14 of 406

CHEVROLET EXPRESS CARGO VAN 2006 1.G Owners Manual •The passenger’s side pin has a black cap with a
white “R” marked on it.
3. Pull the pin handle up to disengage the pin from
the retaining clip, then pull the pin out.
4. Repeat this procedure
Page:   1-8 9-16 17-24 25-32 32 next >