2006 CHEVROLET CORVETTE engine coolant

[x] Cancel search: engine coolant

Page 177 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual When the system is working, you will see the ACTIVE
HANDLING message displayed in the DIC. You may also
feel or hear the system working. This is normal.
If the driver turns off the Active Handling Sys

Page 185 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual 2(Gages):Press this button to display gage
information like oil pressure and temperature, coolant
temperature, automatic transmission �uid temperature, if
equipped, battery voltage, and front/rear tir

Page 186 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual The fuel economy data used to determine fuel range
is an average of recent driving conditions. As your
driving conditions change, this data is gradually updated
automatically.
If the vehicle has been

Page 191 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual BUCKLE SEATBELT:This message reminds you to
buckle the driver’s seat belt.
This message will display and a chime will sound when
the ignition is on, the driver’s seat belt is unbuckled,
and the ve

Page 192 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual CLOSE TRUNK TO MOVE TOP:This message will
display and a chime will sound if the trunk is open while
you are trying to operate the convertible top. Make
sure the trunk is closed before operating the co

Page 193 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual ENGINE PROTECTION REDUCE ENGINE RPM:
You will hear multiple chimes when this message is
displayed. This message will remain displayed and
active until the issue is resolved.
If the engine oil temperat

Page 196 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual NO FOB - OFF OR RUN?:When this message
displays, it means that the keyless access transmitter
is not detected inside the vehicle while you are trying
to turn the ignition off. Your vehicle may be near

Page 202 of 426

CHEVROLET CORVETTE 2006 6.G Owners Manual TRANSMISSION HOT IDLE ENGINE:You will hear
four chimes when this message is displayed. To
acknowledge this warning, press the RESET button.
After you press the RESET button, the message will be
displa