2006 CADILLAC DTS service

[x] Cancel search: service

Page 214 of 450

CADILLAC DTS 2006 1.G Owners Manual OIL PRESSURE LOW STOP ENGINE
Notice:If you drive your vehicle while the engine
oil pressure is low, severe engine damage may
occur. If a low oil pressure warning appears on the
instrument panel cluste

Page 215 of 450

CADILLAC DTS 2006 1.G Owners Manual REMOTE KEY LEARNING ACTIVE
This message will display while you are matching a
remote keyless entry transmitter to your vehicle.
See “Matching Transmitter(s) to Your Vehicle” under
Remote Keyless E

Page 216 of 450

CADILLAC DTS 2006 1.G Owners Manual SERVICE BRAKE ASSIST
This message will display if there is a problem with the
brake system. The brake system warning light and the
anti-lock brake system warning light may also be
displayed on the ins

Page 217 of 450

CADILLAC DTS 2006 1.G Owners Manual SERVICE STABILITRAK
Your vehicle may have a vehicle stability enhancement
system called StabiliTrak®. SeeStabiliTrak®System
on page 4-10.
This message will display if there has been a problem
detect

Page 218 of 450

CADILLAC DTS 2006 1.G Owners Manual SERVICE TRACTION CONTROL
This message will display when there is a problem with
the Traction Control System (TCS). When this message
is displayed, the system will not limit wheel spin. Adjust
your dri

Page 234 of 450

CADILLAC DTS 2006 1.G Owners Manual Radio with CD (MP3)
Radio Data System (RDS)
The audio system has a Radio Data System (RDS). The
RDS feature is available for use only on FM stations
that broadcast RDS information. This system relies

Page 236 of 450

CADILLAC DTS 2006 1.G Owners Manual Finding a Station
BAND:Press this button to switch between AM, FM, or
XM™ (if equipped). The display will show the selection.
a(Tune):Turn this knob to select radio stations.
©SEEK¨:Press the righ

Page 240 of 450

CADILLAC DTS 2006 1.G Owners Manual Undesired XM™ categories can be removed through
the setup menu. To remove an undesired category,
perform the following:
1. Press the MENU button to display the radio
setup menu.
2. Press the pushbut