
 5Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Your individual vehicle
In purchasing your BMW, you have decided in 
favor of a model with individualized equipment 
and features. This Owner's Manual describes 
the entire array of options and equipment avail-
able with a specific BMW model.
Please bear in mind that the manual may con-
tain information on accessories and equipment 
that you have not specified for your own vehicle. 
Sections describing options and special equip-
ment are marked by asterisks
* to assist you in 
identifying possible differences between the 
descriptions in this manual and your own vehi-
cle's equipment.
If equipment in your BMW is not described in 
this Owner's Manual, please refer to the accom-
panying Supplementary Owner's Manuals.
Editorial notice
BMW pursues a policy of continuous, ongoing 
development that is conceived to ensure that 
our vehicles continue to embody the highest 
quality and safety standards combined with 
advanced, state-of-the-art technology. For this 
reason, the features described in this Owner's 
Manual may in rare cases differ from those on 
your vehicle.
For your own safety
Maintenance and repairs
Advanced technology, e.g. the use of 
modern materials and high-performance 
electronics, requires specially adapted mainte-
nance and repair methods. Therefore, have cor-
responding work on your BMW performed only 
by your BMW center or a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. If this work is 
not carried out properly, there is a danger of 
subsequent damage and related safety haz-
ards.<
California Proposition 65 Warning
California laws require us to issue the following 
warning:
Engine exhaust and a wide variety of 
automobile components and parts, 
including components found in the interior fur-
nishings in a vehicle, contain or emit chemicals 
known to the State of California to cause cancer 
and birth defects and reproductive harm. In 
addition, certain fluids contained in vehicles and 
certain products of component wear contain or 
emit chemicals known to the State of California 
to cause cancer and birth defects or other 
reproductive harm. 
Battery posts, terminals and related accesso-
ries contain lead and lead compounds. Wash 
your hands after handling. Used engine oil con-
tains chemicals that have caused cancer in lab-
oratory animals. Always protect your skin by 
washing thoroughly with soap and water.< 

At a glance
 17Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Menus on Control Display
You can select from an extended range of func-
tions and setting options:
1BMW Assist
*186
2Communication
>Using the phone1823Car Data
>Computer76
>Trip computer82
>Speed limit82
>Stopwatch83
>Assistance window
 for onboard 
data83
>Service required78
>Check Control messages80
>Engine oil level202
4Navigation
*130
>Destination input131
>Route guidance143 

Controls
 89Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Deactivating DTC
Select "DTC" again and press the controller. 
The LED on the Control Display and the DTC 
indicator lamp on the Info Display go out.
Dynamic Drive
The concept
Dynamic Drive minimizes body roll and opti-
mizes vehicle stability during cornering and 
evasive maneuvers.
Active stabilizers at the front and rear axles form 
the basis for Dynamic Drive. Suspension com-
pliance adapts to suit driving conditions, vary-
ing from performance-oriented during corner-
ing to smooth and comfort-oriented when the 
vehicle is traveling in a straight line. During vehi-
cle operation, the system continuously runs 
through closed-loop control cycles lasting only 
fractions of a second.
The system assumes operational status each 
time you start the engine.
Malfunction
The warning lamp lights up yellow and 
a message is shown on the Info Display. 
A malfunction has occurred in the 
Dynamic Drive system. Have the system 
checked as soon as possible.
If a malfunction occurs, please remember 
to adapt your speed accordingly, espe-
cially in curves. 
The suspension will be noticeably softer and 
the vehicle will display a greater tendency to tilt 
during cornering and in crosswinds. 
If a Check Control message stating that you 
should stop is displayed, stop at a suitable loca-
tion and switch off the engine as soon as possi-
ble. In this case, the oil level in the reservoir may 
have dropped below the minimum, possibly 
owing to a leak in the hydraulic system. 
Do not continue driving, but instead contact 
your BMW center.<
Self-leveling suspension*
Malfunction
The warning lamp for self-leveling sus-
pension lights up yellow and a message 
is shown on the Info Display. 
A malfunction has occurred in the level control 
system. 
Stop driving and check the vehicle:
>The vehicle is considerably lower at the rear 
than at the front, possibly also on one side, 
at the rear left compared to the rear right.
>The ground clearance is reduced or the 
driving comfort is noticeably reduced.
>The position of the vehicle is normal, but a 
malfunction is indicated.
Drive to the nearest BMW center or a workshop 
that works in accordance with BMW guidelines 
and uses appropriately trained personnel. Drive 
with appropriate caution in the meantime.
EDC Electronic Damping 
Control*
If the influencing variables such as road surface 
quality or operating conditions such as steer-
ing, braking etc. change, the damping automat-
ically adjusts to the new conditions.
iDrive, for principle details, refer to page16.
1.Press the   button to open the start 
menu.
2.Move the controller toward "Settings".
3.Select "Vehicle" and press the controller.
4.Select "EDC" and press the controller. 

Wheels and tires
200
Recommended tire sizes and brands
BMW recommends particular tire brands for 
each tire size. You will recognize them by the 
clearly visible BMW identification on the tire 
sidewall.
With proper use, these tires meet the highest 
standards for safety and handling characteris-
tics.
Run-flat tires
When installing new tires or when changing 
from summer tires to winter tires or vice versa, 
for your own safety, use run-flat tires. No spare 
wheel is provided in the event of a flat. Your 
BMW center will be glad to advise you.
For safety reasons, BMW recommends 
that you not have damaged run-flat tires 
repaired; they should be replaced.<
Special characteristics of winter tires
BMW recommends winter tires for use in cold 
winter driving conditions. Although so-called 
all-season M+S tires provide better winter trac-
tion than summer tires, they generally fail to 
provide the same levels of cold-weather perfor-
mance as winter tires.
Observing speed ratings
Never exceed the maximum speed for 
which the winter tires are rated.<
Storage
Always store wheels and tires in a cool, dry 
place with as little exposure to light as possible. 
Always protect tires against all contact with oil, 
grease and fuels.
Do not exceed the maximum tire inflation pres-
sure indicated on the side wall of the tire.
Snow chains*
Only certain fine-link snow chains are tested, 
classified as road-safe, and recommended by 
BMW. Consult your BMW center for more infor-
mation. Use on winter tires is only permissible in 
pairs on the rear wheels. Follow the manufac-
turer's instructions when installing snow 
chains. Do not exceed a vehicle speed of 
30 mph/50 km/h with the chains mounted.
Do not initialize the Flat Tire Monitor after 
mounting snow chains. When you are 
driving with snow chains, it can be beneficial to 
activate DTC briefly, refer to page88.<  

Under the hood
202
Engine compartment
1Brake fluid reservoir, located beneath the 
microfilter cover204
2Reservoir for windshield and headlamp 
washer system663Engine oil filler neck, refer to Adding engine 
oil
4Body ground, negative terminal213
5Coolant expansion tank204
6Jump starting terminal214
Engine oil
The engine oil consumption depends on driving 
style and driving conditions.
Checking oil level
Your vehicle is equipped with an electronic oil 
level control.
To obtain the most accurate possible oil level 
reading, the measurement should be taken 
when the engine is at operating temperature, 
i.e. following an uninterrupted drive of at least 
6 miles/10 km. You can display the oil level 
while driving or when stopped on a level surface 
with the engine running.
The current oil level can be viewed on the Con-
trol Display.
iDrive, for principle details, refer to page16.1.Press the   button to open the start 
menu.
2.Move the controller toward "Car Data".
3.Select   and press the controller.
The oil level is displayed.
Turn the controller to exit the list. 

Mobility
 203Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Possible displays
>"Update of engine oil level in process".
>"Engine oil level O.K.".
>"Oil level at minimum! Add 1 quart engine 
oil": Add a maximum of 1 quart/1 liter of 
engine oil at the earliest opportunity, refer 
to Adding engine oil.
>"Oil level under min.! Add 1 quart engine 
oil": Add a maximum of 1 quart/1 liter of 
engine oil at the earliest opportunity, refer 
to Adding engine oil.
>"Engine oil level too high".
Have vehicle checked immediately; 
otherwise, overfilled oil can lead to 
engine damage.<
>"No measurement possible at this time".
Adding engine oil
Do not add oil until a Check Control message 
appears.
Add oil within the next 125 miles/200 km; 
otherwise, the engine could be dam-
aged.<
Keep oil, grease, etc. out of reach of chil-
dren and heed warnings on the contain-
ers to avoid health risks.<
Oil changing
Only have an oil change carried out by a BMW 
center or a repair shop that works in accordance 
with BMW guidelines and uses appropriately 
trained personnel.
Approved engine oils
The quality of the engine oil selected has critical 
significance for the operation and service life of an engine. BMW continuously approves spe-
cific engine oils after confirming their suitability 
for use in its vehicles with extensive testing.
Use only approved BMW High Performance 
Synthetic Oil.
If BMW High Performance Synthetic Oil is 
unavailable, you can add small quantities of 
other synthetic oils between oil changes. Use 
only oils of the specification API SH or higher.
Your BMW center will be happy to answer 
detailed questions on BMW High Perfor-
mance Synthetic Oil or approved synthetic 
oils.<
You can also call BMW of North America at 
1-800-831-1117 or visit the website at 
www.bmwusa.com to obtain this information.
Never use oil additives as they can dam-
age your engine under some circum-
stances.<
Viscosity grades
The viscosity is a measure of the thickness of 
the oil and is specified in SAE grades.
The choice of the right SAE grade is based on 
the climatic conditions in the region in which 
you normally drive your BMW.
Approved oils belong to the SAE grades 
5W-40 and 5W-30.<
These oils can be used for driving at all outside 
temperatures.
Coolant
Do not open the cooling system when the 
engine is hot. Escaping coolant can cause 
burns.<
Coolant consists of water and supplemental 
antifreeze and anticorrosion agents. Not all 
commercially available additives are suitable for 
your BMW. Ask your BMW center for suitable 
additives.
Only use suitable additives; otherwise, 
engine damage may result. The additives 
present a health hazard; observe the instruc-
tions on the containers.< 

Mobility
 205Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Maintenance
The BMW Maintenance 
System
The BMW Maintenance System serves to 
retain the operating and road safety of your 
BMW. The service schedule also includes oper-
ations related to the vehicle's comfort and con-
venience features, such as replacement of the 
filters for the inside air. The aim is to optimize 
maintenance procedures with a view to reduc-
ing the cost of running the vehicle.
Should the day come when you decide to sell 
your BMW, you will find that a complete dealer 
service history is an asset of inestimable value.
CBS Condition Based Service
Sensors and special algorithms take the differ-
ent driving conditions of your BMW into 
account. As a result, Condition Based Service 
determines the current and future maintenance 
requirements. By letting you define a service 
and maintenance regimen that reflects your 
own individual requirements, the system forms 
the basis for trouble-free driving.
You can have the remaining times or distances 
to selected maintenance requirements as well 
as legally required deadlines displayed on the 
Control Display, refer to page78:
>Engine oil
>Brakes, separate for front and rear
>Microfilter
>Brake fluid
>Spark plugs>Vehicle check
>Legally prescribed inspections depending 
on national regulations
Your vehicle stores this information continu-
ously in the ignition key while the vehicle is 
being driven. After accessing the data stored in 
the vehicle key, your BMW Service Advisor can 
suggest precisely the right array of service pro-
cedures for your own individual vehicle. This is 
why it is important when you take your vehicle in 
for service to give the BMW Service Advisor the 
last remote control you used for driving.
Storage periods with the battery discon-
nected are not taken into account by the 
CBS maintenance system. Have the time-
dependent service and maintenance opera-
tions, such as brake fluid and coolant, and if 
necessary engine oil and the micro/activated 
charcoal filter, updated by a BMW center.<
Service and Warranty Information 
Booklet for US models and 
Warranty and Service Guide Booklet 
for Canadian models
Please consult your Service and Warranty Infor-
mation Booklet for US models and Warranty 
and Service Guide Booklet for Canadian models 
for additional information on service require-
ments.
BMW recommends that you have service 
and repair operations performed at your 
BMW center.
Take the time to ensure that these service pro-
cedures are confirmed by entries in your vehi-
cle's Service and Warranty Information Booklet 
for US models and Warranty and Service Guide 
Booklet for Canadian models. These entries 
verify that your vehicle has received the speci-
fied regular maintenance.< 

Reference 221
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Capacities
Notes
Fuel tank 
including a reserve of: 
750i/Li
760i/Ligal/liters
gal/liters
gal/litersapprox. 23.3/88
approx. 2.6/10
approx. 3.1/12Fuel specification: page193
Window and headlamp 
washer system  quarts/liters approx. 6.3/6.0 For details: page66
Engine with oil filter change 
750i/Li
760i/Liquarts/liters
quarts/liters8.5/8.0
9.0/8.5BMW High Performance
Synthetic Oil.
Specifications: page203