
At a glance
This overview of buttons, switches and displays
is intended to familiarize you with your vehicle's
operating environment. The section will also
assist you in becoming acquainted with the
control concepts and options available for
operating the various systems.
At a glance 

At a glance
 11Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
7Buttons on steering wheel
8Instrument cluster12
11Ignition lock58
12Horn: the entire surface15Releasing the hood190
16Opening luggage compartment lid34 Mobile phone
*162
>Press: accepting and ending 
call, starting dialing
* for 
selected phone number and 
redialing if no phone number is 
selected
>Press longer: redialing
Volume
Activating/deactivating voice 
command system
* 22
Changing radio station
Selecting music track
Scrolling in phone book and in lists 
with stored phone numbers
Individually programmable
*54 
Individually programmable54 
9
Windshield wipers65
Rain sensor65
10Starting/stopping engine and 
switching ignition on/off 58
13
Steering wheel heater
*54
Steering wheel adjustment53
14
Cruise control66
Active cruise control
*67
17
Head-Up Display
*93
18
Parking lamps96
Low beams96
Automatic headlamp control96
Adaptive Head Light
*97
19
Instrument lighting99
Front fog lamps98 

Controls
 29Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Remove the adapter from the holder in the 
glove compartment and slide the spare key into 
the adapter.
Personal Profile
The concept
You can set a number of functions of your BMW 
individually according to your preferences. 
Personal Profile ensures that most of these set-
tings are stored for the remote control currently 
in use without you having to do anything. When 
the vehicle is unlocked, the corresponding 
remote control is detected and the settings 
stored for it are called up and carried out.
This means that you will always find your BMW 
set to your own personal settings even if 
another person with his/her own remote control 
and settings has used the vehicle since the last 
time you drove it. The individual settings are 
stored for a maximum of four remote controls.
Personal Profile settings
>When unlocking with the remote control, 
either unlock only the driver's door or 
unlock the entire vehicle, refer to page30
>Locking the vehicle after a short time or 
after starting to drive, refer to page32
>Assigning the programmable buttons on 
the steering wheel, refer to page54>Display settings for the Control Display:
>Brightness of the Control Display, refer 
to page83
>Units of measure for consumption, 
route/distances, temperature and pres-
sure, refer to page83
>Language on the Control Display, refer 
to page84
>12h/24h clock mode, refer to page83
>Date format, refer to page83
>Displaying optical warning for the PDC Park 
Distance Control
*, refer to page85
>Selection and brightness of the display for 
the Head-Up Display
*, refer to page94
>Air distribution, temperature in the upper 
body region, and intensity for the automatic 
climate control, refer to page101
>Adjusting the voice instructions for the des-
tination guidance of the navigation sys-
tem
*, refer to page135
The most recent settings for the following are 
also called up during unlocking:
>Driver's seat, exterior-mirror and steering-
wheel position, refer to page49
>The volume and tone settings for audio 
sources, refer to page141
>The display of the stored stations for the 
radio, refer to page144
>The volume setting for the telephone, refer 
to page166
Central locking system
The concept
The central locking system is ready for opera-
tion whenever the driver's door is closed. 
The system either locks or unlocks all of the fol-
lowing:
>Doors
>Compartment in the front center console
>Luggage compartment lid
>Fuel filler door 

Opening and closing
30
Operating from outside
>via the remote control
>via the door lock
>with comfort access
* via the door handles
These actions operate the anti-theft system at 
the same time. It prevents the doors from being 
unlocked using the lock buttons or door han-
dles. The alarm system
 is likewise armed/dis-
armed. The interior lamps and the courtesy 
lamps
* are also switched on and off with the 
remote control.
You can find more detailed information on the 
alarm system
 on page35.
Operating from inside
Via the central locking button, refer to page32. 
The fuel filler door
 and the compartment in the 
front center console are not locked, refer to 
page32.
In the event of a serious accident, the central 
locking system unlocks automatically. The haz-
ard warning flashers and interior lamps are also 
switched on.
Opening and closing: from 
outside
Using the remote control
Because any persons or animals left unat-
tended in a parked vehicle could lock the 
doors from the inside, you should always keep 
the remote control with you when you leave the 
vehicle; this precaution ensures that you will 
remain able to unlock the vehicle from the out-
side at all times.<
Unlocking
You can use the button to unlock the vehicle 
depending on the current setting.
iDrive, for principle details, refer to page16.
1.Press the   button.
This opens the start menu.
2.Press the controller to open the   menu.3.Select "Vehicle settings" and press the 
controller.
4.Select "Door locks" and press the control-
ler.
5.Select "Central locking" and press the con-
troller.
6.Select "Unlock button" and press the con-
troller.
7.Select a menu item:
>"All doors"
Press the   button once to unlock the 
entire vehicle.
>"Driver's door only"
*
 Press the   button once to unlock only 
the driver's door and the fuel filler door.
Press the button twice to unlock the 
entire vehicle.
8.Press the controller.
The setting is stored for the remote control cur-
rently in use.
Convenience opening mode
Press the   button longer:
>Coupe: the windows are opened, the glass 
sunroof
* is raised and the sliding visor 
slides back. 

Controls
 37Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>The engine can only be started if the vehicle 
detects that the remote control carried is 
located in the vehicle.
Special features in contrast to ordinary 
remote control
It is basically irrelevant whether you operate the 
above-mentioned functions with the comfort 
access feature or by pressing the buttons on 
the remote control. Before doing so, please 
familiarize yourself with the information on 
opening and closing, starting on page28.
The special features when using comfort 
access are described below.
Unlocking
Completely grasp a door handle, arrow1. 
This corresponds to pressing the  button.
If a remote control is detected in the interior 
after unlocking, the electric steering-wheel lock 
disengages, refer to page58.
Locking doors
Touch the surface, arrow2 on the driver's door 
or3 on the passenger door with a finger for 
approx. 1 second. This corresponds to pressing 
the button.
For comfort closing, hold a finger on the sur-
face, arrow2 or 3.
If a remote control accidentally left in the 
luggage compartment is detected inside 
the locked vehicle after the luggage compart-
ment lid has been closed, then the luggage 
compartment lid opens again. The hazard warn-
ing flashers flash and an acoustic signal
* 
sounds.<
Switching on radio readiness
By briefly pressing the Start/Stop button, you 
switch on the radio readiness, refer to page58.
When doing so, do not depress the brake 
pedal; otherwise, the engine will start 
immediately.<
Starting engine
You can start the engine or switch on the igni-
tion if a remote control is located on the interior 
of the vehicle. It need not be inserted in the igni-
tion lock, refer to page58.
If you take the remote control with you when 
leaving the vehicle with the engine running, a 
warning lamp lights up. In addition, a message 
appears on the Control Display. As long as no 
remote control is detected in the vehicle, it is 
only possible to restart the engine within 
approx. 10 seconds after it is switched off.
Switching off engine with automatic 
transmission
The engine can only be switched off in the 
selector lever position P, refer to page60.
To switch off the engine in the selector lever 
position N, the remote control must be inserted 
in the ignition lock.
Before driving into a car wash with 
automatic transmission
1.Insert the remote control into the ignition 
lock.
2.Depress brake pedal.
3.Place selector lever in position N.
4.Switch off the engine.
The vehicle can roll.
Malfunction
The comfort access function may malfunction 
due to local radio waves. If this occurs, then 
open or close the vehicle with the buttons on 
the remote control or with a key. To start the 
engine after this, insert the remote control in the 
ignition lock. 

Controls
 43Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>If the LED lights up red when the button is 
pressed, either the floor of the convertible 
top storage compartment in the luggage 
compartment is in the raised position or a 
malfunction has occurred. The convertible 
top cannot be moved.
Interruption
The automatic sequence of movements is 
interrupted immediately if the button for top 
operation is released. The sequence can be 
continued in the desired direction by pressing 
the appropriate button. 
If the opening or closing action is interrupted for 
a longer period, the convertible top remains in 
that position for approx. 15 minutes before it 
slowly moves to a stable position.
A convertible top which is not completely 
opened or closed presents a danger.
Do not interrupt and continue the closing action 
several times in succession; otherwise, the top 
mechanism can be damaged.<
If the convertible top is not completely 
open or closed, then the luggage com-
partment lid cannot be opened.<
Convenience operation with the 
remote control and via the door lock
Refer to pages30 and32.
Manual closing
Only close the convertible top manually if 
absolutely necessary; never open it man-
ually. The convertible top compartment lid can-
not be locked in the event of an electrical mal-
function and would open while the vehicle is 
being driven.
Improper handling can lead to damage.<
Before closing
1.Open luggage compartment lid.
2.Take the Allen wrench and the screwdriver 
from the onboard tool kit, refer to page197.
3.Pry out the two buttons in the luggage com-
partment with the screwdriver and then pull 
firmly. This unlocks the convertible top 
compartment lid.
4.Close luggage compartment lid.
During manual convertible top opera-
tion, the luggage compartment lid 
cannot be opened.<
5.Completely open the side windows and the 
rear window.
If the rear window cannot be opened using 
the switch, it must be lowered manually.
Opening rear window manually
1.Pry out the cover between the rear head 
restraints. To do so, place the screwdriver 
as close as possible to the locking ele-
ments, as shown in the illustration.
2.Insert the Allen wrench as far as possible 
into the opening and turn firmly in the direc- 

Controls
 49Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Seat, mirror and steering 
wheel memory
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not 
stored in the memory.
Storing
1.Switch on radio readiness or ignition, refer 
to page58.
2.Adjust the desired seat, exterior mirror and 
steering-wheel positions.
3.Press the   button:
The LED in the button lights up.
4.Press the desired memory button 1, 2 or3:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a 
risk of accident from unexpected movement of 
the seat or steering wheel.<
Convenience mode
1.Open the driver's door after unlocking or 
switch on radio readiness, refer to page58.
2.Briefly press the desired memory button1, 
2 or3.
The system immediately cancels the adjust-
ment procedure when you briefly press one of 
the seat adjustment switches or one of the 
memory buttons.The adjusting procedure for the steering wheel 
is immediately interrupted if you operate the 
switch for the steering wheel adjustment in any 
direction, refer to page53.
Safety feature
1.Close the driver's door and switch ignition 
on or off, refer to page58.
2.Press the desired memory button 1, 2 or3 
and maintain pressure until the adjustment 
process has been completed.
If the   button was pressed inadvertently: 
press the button again; the LED goes out.
Activating with remote control
The last positions of the driver's seat, external 
rearview mirrors, and steering wheel are stored 
for the remote key currently in use.
You can choose when the position is requested:
>Request when unlocking vehicle
>Request when opening driver's door
iDrive, for principle details, refer to page16.
1.Open the start menu.
2.Press the controller to open the   menu.
3.Select "Vehicle settings" and press the 
controller.
4.Select "Door locks" and press the control-
ler.
5.Select "Central locking" and press the con-
troller.
6.Select "Last seat pos." and press the con-
troller. 

Adjustments
54
Steering wheel heater*
Press the button with the ignition switched on.
The indicator lamp in the button lights up when 
the steering wheel heater is switched on.
Programmable buttons* on steering 
wheel
You can program the buttons individually.
iDrive, for principle details, refer to page16.
1.Press the   button.
This opens the start menu.
2.Press the controller to open the   menu.
3.Select "Vehicle settings" and press the 
controller.
4.Select "Steering wheel buttons" and press 
the controller.A list of various functions is displayed:
>"Navigation voice instructions" 
Voice instructions of the navigation sys-
tem
*
>"Air recirculation on / off"
Permanently shutting off outside air, 
refer to AUC Automatic recirculated air 
control on page103
>"Mute on / off" 
Mutes the audio sources
>"Monitor on / off" 
Switches the Control Display on/off
>"Telephone list"
Display/hide phone book or last list of 
stored phone numbers displayed
>"Next entertainment source"
Changes audio source
5.Select the desired function and press the 
controller.
6.Select the button if necessary and press the 
controller.
You can now activate the selected function 
using the corresponding button.
The setting is stored for the remote control cur-
rently in use.