2006 BMW 3 SERIES brake pads

BMW Full Maintenance Program
– 2006 325i, 330i
Full Maintenance Programs are a benefit
designed to help reduce the cost of owner-
ship.
2006 3 Series vehiclespurchased from any
Authorized BMW center in the United States
or Puerto Rico are covered by Full
Maintenance for 48 months or 50,000 miles,
whichever occurs first. Coverage begins on
the date of first retail sale or the date the
vehicle is first placed in service as a demon-
strator or company vehicle, whichever is
earlier.
Any authorized BMW center in the United
States or Puerto Rico will perform the sched-
uled maintenance services on your vehicle at
no expense to you. The maintenance sched-
ule intervals are based on average driving
conditions and operation.
Should you
request more frequent maintenance
service, the cost of these services will not
be covered by the Maintenance Program.
Coverage
Full Maintenancecovers all factory recom-
mended maintenance, as determined by the
Condition Based Service System. Additional
items that need replacement due to normal
wear and tear, and that are not covered by
the original New Vehicle Limited Warranty -
such as brake pads, brake rotors, and wiper
blades inserts - are included, provided wear
and tear exceeds BMW wear limits. Any
adjustments required due to normal operating
conditions are also included. See pages 6-7
of this booklet for additional information.
Maintenance Intervals
Time intervals should be followed using the
maintenance interval as indicated by the
BMW Service Interval Display.
This BMW Service and Warranty Information
Booklet should be presented to your BMW
center when maintenance is required. Your
BMW center will stamp this booklet
documenting the services or maintenance
performed.
Exclusions from coverage
- Items reimbursable under your New
Vehicle Limited Warranty.
- Gasoline.
- Windshield washer additive (except when
in conjunction with scheduled maintenance).
- Tires, wheel alignment, tire balance and
rotation.
- Wear and tear of soft trim items, such as:
seats, carpets, moldings, headliner, door
panels and all chrome trim.
- Damage detected when performing the
rust perforation inspection.
- Damage which results from negligence,
improper operation of the vehicle, wear and
tear or deterioration due to driving habits or
conditions, improper repair, environmental
influences, flood, accident or fire damage,
road salt corrosion, alteration, installation of
non-BMW accessories, or use of improper,
poor quality or contaminated fuel.
- Altered or unreadable Vehicle Identification
Number (VIN) or odometer irregularities or
vehicles where the true mileage cannot be
determined.
- Maintenance or repair after the vehicle is
deemed a total loss.
- Maintenance or repairs performed by other
than an Authorized BMW center within the
United States or Puerto Rico.
- Vehicles used in competitive events.
- Oil changes performed outside the recom-
mended maintenance intervals as indicated
by the Service Interval Display.
Maintenance Upgrade Option
Please contact your authorized BMW center
for information regarding an optional 6 year
100,000 mile maintenance upgrade.
1
SD92 270
27578 3 Series Text for#72A.qxd 1/31/05 10:30 AM Page 1

Maintenance System
The BMW Maintenance System has been
devised with the following objectives: to
maximize vehicle safety, reliability, and resale
value by minimizing breakdowns resulting
from wear, and minimizing cost and inconven-
ience by computing maintenance intervals
based upon the specific manner in which
each individual vehicle is driven.
Maintenance intervals on motor vehicles have
conventionally been specified based upon
accumulated mileage. However, driving condi-
tions have a major influence on routine
maintenance requirements; distance traveled
is only one of the significant factors. A vehicle
driven for 50,000 miles of short trips in the
city with numerous cold starts, prolonged
periods of idling, stop-and-go driving, and
high engine speeds during acceleration
requires more frequent maintenance intervals
than a vehicle driven for 50,000 miles for long
distances at low engine speeds primarily at
operating temperature.
The advanced technologies at BMW have led
to the development of the unique BMW
Condition Based Service System (CBS)
which computes the actual optimum mainte-
nance requirements based not only upon the
accumulated mileage, but taking into account
important factors such as high or low engine
speeds, short or long trip driving, and condi-
tion of the engine oil and brake pads.
The BMW Maintenance System
Condition Based Service CBS
CBS is a further development of the Service
Interval Indicator System. Sensors and
sophisticated algorithms take even more
detailed account of the various conditions of
vehicle use.
The remaining times for selected mainte-
nance tasks as well as any legally prescribed
dates are displayed to you individually:

Engine oil

Brakes – front and rear separately

Microfilter

Brake fluid

Spark plugs

Vehicle check

Required State Inspection(s)
CBS thus determines the current and future
maintenance requirements. This data can
also be read from the vehicle key by your
BMW Service Advisor and used to propose
the optimum scope of maintenance.
Have maintenance and repair work performed
by your BMW center. Make sure that the
maintenance work is stamped in this Service
and Warranty Information Statement. These
entries are the evidence of regular mainte-
nance of your vehicle and a requirement for
warranty claims.
2
27578 3 Series Text for#72A.qxd 1/31/05 10:30 AM Page 2

Maintenance summary
The Condition Based Service System (CBS)
will determine the requirement for perform-
ance of the maintenance services described
on this and the following page. These
services may be required either individually or
in conjunction with other maintenance
services.
Standard operations
Maintenance work
• Brief diagnostic test
• Verify Check Control messages
• Check indicator and warning lights
• Reset CBS display
Engine oil
Maintenance work
• Change the engine oil and oil filter. We
recommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
• After every 3rd engine oil change:
Intake air cleaner: replace air filter element
(reduce replacement interval in dusty
operating conditions).
• Parking brake: check function
Microfilter
Maintenance work
• Replace ventilation microfilter
Front brake
Maintenance work
• Replace brake pads, clean brake pad
contact points in calipers.
• Brake discs:
Check surface and thickness, if necessary
replace at extra charge*
Rear brake
Maintenance work
• Replace brake pads, clean brake pad
contact points in calipers.
• Brake discs:
Check surface and thickness, if necessary
replace at extra charge*
• Parking brake:
Check condition, brake lining thickness and
function, if necessary replace at extra charge*.
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work
• Check operation of horn, headlight flasher
and hazard warning flashers.
• Check instrument and control lighting and
heater/air-conditioning blower.
• Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
• Safety belts: check condition and function.
• Check windshield wiper and washer jet
positions.
• Body: check for corrosion (except cavities).
• Tires: check tread depth, wear pattern, outer
condition, inflation pressure. If necessary,
correct pressure.
• Initialize run-flat indicator.
• Battery: check state of charge (magic eye)
and charge if required.
• Power steering reservoir: Check fluid level.
• Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
• Rear-view mirrors
• Coolant: check fluid level and concentration.
• Windshield washer and intensive cleaning
system: check protection level, fluid level,
top if necessary.
6
27578 3 Series Text for#72A.qxd 1/31/05 10:30 AM Page 6

Vehicle Check
Maintenance work (continued)
• Brake system connections and lines: check
for leaks, damage and correct positioning
• Underbody, incl. all visible parts (i.e. trans-
mission, rear axle, fuel lines, exhaust
system), check for damage, leaks and
corrosion
• Steering components: check for clearance,
leaks, damage and wear
• Final Inspection: Road test with check of
– Brakes, including burnishing of parking
brake pads
– Steering
– Shock absorbers (visual)
– Transmission
Brake fluid
Maintenance work
• Replace brake fluid
Spark plugs
Maintenance work
• Replace spark plugs at intervals of 100,000
miles
Automatic Transmission
Maintenance work
• Replace ATF at intervals of 100,000 miles
7
27578 3 Series Text for#72A.qxd 1/31/05 10:30 AM Page 7

New Vehicle Limited Warranty –
2006 Models (Valid Only in the
U.S.A. and Puerto Rico)
Warrantor
BMW NA warrants 2006 U.S. specification
vehicles distributed by BMW NA or sold
through the BMW NA European Delivery
Program against defects in materials or
workmanship to the first retail purchaser, and
each subsequent purchaser.
Warranty Period
The warranty period is 48 months or 50,000
miles, whichever occurs first.
Warranty Begins
This warranty begins on the date of first
retail sale, or the date the vehicle is first
placed in service as a demonstrator or
company vehicle, whichever is earlier.
Warranty Coverage
To obtain service under this warranty, the
vehicle must be brought, upon discovery of a
defect in material or workmanship, to the
workshop of any authorized BMW center,
during normal business hours. The BMW
center will, without charge for parts or labor,
either repair or replace the defective part(s)
using new or authorized remanufactured
parts. The decision to repair or replace said
part(s) is solely the prerogative of BMW NA.
Parts for which replacements are made
become the property of BMW NA.
In all cases, a reasonable time must be allowed
for warranty repairs to be completed after the
vehicle is received by the BMW center.
Safety Belt Warranty - Kansas
Safety belts are covered under the BMW New
Vehicle Limited Warranty for defects in
material or workmanship for a period of 10
years, unlimited mileage from the date of
purchase. In order to be eligible for this
coverage, the vehicle must be a new car
retailed in the State of Kansas and the repair
performed by an authorized BMW center in
Kansas.
Towing/Other Owner Benefits
A 24-hour Roadside Assistance Program is
available to every BMW owner during the new
vehicle warranty period.
Roadside assistance and other owner
benefits are available by calling:
1-800-332-4269
For additional details on towing and other
owner benefits please refer to the BMW
Roadside Assistance section of this
Statement (page 28).
Other Items
Wheel alignment, balancing and wiper blade
inserts are covered up to 2,000 miles.
Items which are subject to wear and tear
or deterioration due to driving habits or
conditions, such as brake pads/linings,
brake discs, clutch disc, pressure plate,
filters, upholstery, trim and chrome items,
paint finish, drive belts, glass, and similar
items, are specifically limited to defects in
material or workmanship.
This warranty does not apply to the follow-
ing:
Damage which results from negligence,
improper operation of the vehicle, improper
repair, lack of or improper maintenance,
environmental influences, flood, accident or
fire damage, road salt corrosion, or use of
improper or contaminated fuel.
Damage to the engine, transmission or any
related component caused by improper shift-
ing of the transmission.
Maintenance services and parts when
replaced during maintenance such as spark
plugs, lubricants, fluids, engine tuneup parts,
replacement of filters, coolant, and refriger-
ant.
Failure to maintain the vehicle properly in
accordance with the instructions in the
Owner’s Manual or the Service section of this
Statement, that results in the failure of any
part of the vehicle.
32
27578 3 Series Text for#72A.qxd 1/31/05 10:30 AM Page 32