2006 Alfa Romeo GT inflation pressure

CORRECT USE OF THE CAR
208
It is necessary therefore to limit their use
to the purposes for which they are certified.
IMPORTANTWhen winter tyres are
used with a maximum speed index below
the one that can be reached by the vehicle
(increased by 5%), place a notice in the
passenger’s compartment, plainly in the dri-
ver’s view, which states the maximum per-
missible speed of the winter tyres (as per
CE Directive).
Fit the same type of tyre on all four
wheels (brand and profile) to ensure high-
er driving safety when braking and good
handling.
Remember that it is inappropriate to
change the direction of rotation of tyres. WINTER TYRES
These tyres are specially designed for dri-
ving on snow and ice, to be fitted in
replacement of those fitted on the car.
Use winter tyres of the same size as nor-
mal tyres provided on the car.
Alfa Romeo Authorised Services will be
pleased to advise you on the choice of the
tyre most suited to the use the Customer
intends to make of it.
For the type of tyre to be used, inflation
pressures and specifications of winter
tyres, follow the instructions given in the
“Technical Specifications” chapter.
The winter features of these tyres are
reduced considerably when the tread
depth is below 4 mm. In this case, they
should be replaced.
Due to the winter features, under normal
conditions of use or long motorway jour-
neys, the performance of these tyres is
lower than that of normal tyres.
SNOW CHAINS
Use of snow chains should be in compli-
ance with local regulations.
For versions 1.8 T. SPARK, 2.0
JTS and 1.9 JTD, tyre 195/60 R15 can
be fitted with snow chains (use snow chains
with reduced size with max. protrusion be-
yond the tyre profile of 12 mm), whereas
tyres 205/60 R15 - 205/55 R16 -
205/55 ZR16 - 215/45 R17 - 215/45
ZR17 - 225/40 ZR18 cannot be fitted with
snow chains.
On version 3.2
V6, tyres 215/45
R17” and 215/45 ZR 17” can only be fit-
ted with chains of the spiker spider type
whereas tyres 225/45 ZR17 - 225/40
ZR18 cannot be fitted with snow chains.
Snow chains SPIKES SPIDER COMPACT
(model 17003 compact) with 9 spikes with
16 mm adjustable length and 17 inch wheel
cap adapter are available at Lineaccessori
Alfa Romeo.
Snow chains should only be applied to
the drive wheels (front).
Before purchasing or using snow chains,
you are recommended to contact Alfa
Romeo Authorised Services.
Check the tensions of the chain after the
first few metres have been driven.

IN AN EMERGENCY
213
The spare wheel has a
sticker that summarises
the main cautions for use
and limitations. The sticker
should never be removed or cov-
ered. The sticker contains the fol-
lowing in four languages:
CAUTION! FOR TEMPORARY
USE ONLY! MAX 80 km/h!
REPLACE BY NORMAL WHEEL AS
SOON AS POSSIBLE. DO NOT
COVER THIS LABEL IN USE.
Never fit a wheel cap on a com-
pact spare wheel.
The vehicle will handle differ-
ently with the spare wheel fitted:
avoid heavy braking and acceler-
ating, sharp corners and fast
bends.The life of the spare
wheel is approx. 3000
km, after this distance it
should be replaced with another
of the same type.
Never attempt to fit a conven-
tional tyre on a rim designed for
use as a compact spare wheel.
Have the punctured wheel
repaired and refitted as soon as
possible.
Two or more compact spare
wheels should never be used
together.
Do not grease the threads of
bolts before installing them; they
might slip out.
The jack only serves for chang-
ing wheels on the car with which
it is provided or on cars of the
same model. It must not be used
for other purposes such as for
instance raising cars of other
models. In no case should it be
used for repairs under the vehi-
cle.
Incorrect positioning of the jack
may cause the jacked vehicle to
fall.
Do not use the jack for higher
capacities than stated on its
label.Snow chains cannot be
fitted on the compact
spare wheel, so, if a front
wheel is punctured and chains
need to be used, the front axle
should be fitted with normal
wheels and the compact spare
wheel fitted to the rear. This
way, with two normal wheels at
the front, snow chains can be fit-
ted thereby solving the emer-
gency situation.
Never tamper with the inflation
valve.
Do not insert tools of any kind
between the rim and the tyre.
Check, and if necessary, restore
the pressure of the tyres and of
the compact spare wheel to the
values given in the “Technical
Specifications” chapter.

IN AN EMERGENCY
220
– make sure the compressor switchA-
fig. 16is set to 0 (off), start the engine
and fit plugA-fig. 17into the outlet/cig-
ar lighter on the front console and then turn
on the compressor by setting switch A-fig.
16toI(on);– inflate the tyre to the proper pressure
value. Check tyre pressure on gauge B-fig.
16with compressor off to obtain precise
reading;
– if after 5 minutes it is still impossible
to reach at least 1.5 bar, disengage com-
pressor from valve and current outlet, then
move the car forth for approx. 10 metres in
order to distribute the sealing fluid inside the
tyre evenly, then repeat the inflation oper-
ation;– if after this operation it is still impossi-
ble after 5 minutes to reach at least 1.8 bar,
do start driving since the tyre is excessive-
ly damaged and the quick tyre repair kit can-
not guarantee suitable sealing, contact Al-
fa Romeo Authorized Services;
– after reaching the proper tyre pressure,
start driving immediately;
Apply the sticker in a vis-
ible position for the driver
to indicate that the tyre
has been treated with the quick
tyre repair kit. Drive carefully es-
pecially when cornering and do not
exceed 80 km/h. Avoid heavy
braking and accelerating.
fig. 16
A0A1100b
fig. 17
A0A0647b

VEHICLE MAINTENANCE
264
Incorrect pressure causes abnormal tyre
wear:
(A): Normal pressure: tread evenly
worn.
(B): Low pressure: tread particularly
worn at the edges.
(C): High pressure: tread particularly
worn in the centre.
Tyres should be changed when the tread
thickness is reduced to 1,6 mm.
In any case follow local regulations.
You are also reminded that services with
high current absorption switched on by the
user, such as for example: baby bottle
warmers, vacuum cleaner, mobile phone,
mini fridge, etc., quicken the battery
draining processif they are turned on
with the engine off or running at idle
speed.
IMPORTANT When installing addi-
tional systems on the vehicle, bear in
mind that improper branches on connec-
tions of the vehicle wiring are dangerous,
particularly if safety devices are involved.
WHEELS AND TYRES
TYRE PRESSURE
Check the tyre pressure of every wheel,
including the spare, every two weeks and
before a long journey. The pressure should
be checked with the tyre rested and cold.
It is normal for the pressure to increase
when the car is in use; for the correct tyre
inflation pressure, see “Wheels” in the
“Technical Specifications” chapter.
Battery
60 Ah
70 AhMaximum permissible
loadless absorption
36 mA
42 mA
The maximum absorption of all the
accessories (standard and fitted after-
wards) should be 0,6 mA x Ah (of the bat-
tery), as shown in the following table:
fig. 14
A0A0225b

VEHICLE MAINTENANCE
265
Alloy rim painting
involving temperatures
exceeding 150 °C should
be avoided since wheel mechani-
cal characteristics could be
impaired.Do not cross switch the
tyres, moving them from
the right of the car to the
left and vice versa.Excessive low pressure
causes overheating of the
tyre with the possibility
of serious damage to it.Remember that vehicle
road holding also depends
on correct tyre inflation
pressure.
RUBBER HOSES
As far as the brake system and fuel sup-
ply rubber hoses are concerned, carefully
follow the Scheduled Maintenance
Programme. Indeed, ozone, high temper-
atures and the prolonged lack of fluid in
the system may cause hardening and
cracking of the hoses, with possible leaks.
Careful control is therefore necessary. IMPORTANTS
– Where possible, avoid sudden brak-
ing, tyre squealing starts, violent bumps
against kerbs, potholes or obstacles of var-
ious kinds. Prolonged driving on rough
roads may damage the tyres;
– Routinely check the tyres for cuts on
the sides, swellings or uneven tread wear.
If necessary contact Alfa Romeo
Authorised Services;
– Avoid overloading the vehicle when
travelling: this may cause serious damage
to the wheels and tyres;
– If a tyre is punctured, stop immedi-
ately and change it to avoid damage to
the tyre itself, the rim, suspensions and
steering system;
– Tyres age even if they are not used
much. Cracks in the tread rubber are a
sign of aging. In any case, if the tyres
have been on the vehicle for over 6 years,
they should be checked by specialised per-
sonnel, to see if they can still be used.
Also remember to check the compact
spare wheel;
– In case of replacement, always fit new
tyres, avoiding those of dubious origin;

TYRE INFLATION PRESSURES COLD
TECHNICAL SPECIFICATIONS
279
PERFORMANCE
1.8 T. SPARK2.0 JTS 2.0JTS 3.2 V6JTD16VSelespeed
Maximum speed in km/h 200 216 216 243 209
With the tyre hot the inflating pressure should be +0,3 bar compared with the specified rating
With winter tyres the inflation pressure should be +0,2 bar compared with the specified rating
Tyres
195/60 R15bar
205/60 R15bar
205/55 R16bar
205/55 ZR16bar
215/45 R17bar
225/45 ZR17bar
225/40 ZR18bar
Compact spare wheel
125/80 R15barreduced load
front rear
2.2 2.2
2.3 2.3
2.3 2.3
2.3 2.3
2.4 2.3
2.5 2.4
2.5 2..4
4.2full load
front rear
2.5 2.5
2.6 2.6
2.6 2.6
2.6 2.6
2.7 2.6
2.8 2.7
2.8 2.7
4.2

TYRE INFLATION PRESSURES COLD
ENGINE OIL REPLEACEMENT
Oil sump and filter (1.8 T. SPARK - 2.0 JTS) ...................... litres 4.4
Oil sump and filter (3.2
V6) ............................................. litres 5.9
Oil sump and filter (JTD
16V)............................................ litres 4.5
Do not discard used oil in the environment.
REFUELLING
Fuel tank capacity .......................................................... litres 63
Reserve ......................................................................... litres 7
For cars with petrol engine, only use unleaded petrol with over 95 R.O.N.
For cars with diesel engine only use Diesel fuel for motor vehicles (Speci-
fication EN590)
QUALITYASSISTENZA TECNICA - INGEGNERIA ASSISTENZIALE
Largo Senatore G. Agnelli. 5 -10040 Volvera - Torino (Italia)
Fiat Auto S.p.A.
Publication no. 60431484 - 2
ndEdition - 09/2005All rights reserved. Reproduction, even in part is prohibited without written permission
from Fiat Auto S.p.A.
SERVICE
With the tyre hot the inflating pressure should be +0,3 bar compared with the specified rating
With winter tyres the inflation pressure should be +0,2 bar compared with the specified rating
Tyres
195/60 R15bar
205/60 R15bar
205/55 R16bar
205/55 ZR16bar
215/45 R17bar
225/45 ZR17bar
225/40 ZR18bar
Compact spare wheel
125/80 R15barreduced load
front rear
2.2 2.2
2.3 2.3
2.3 2.3
2.3 2.3
2.4 2.3
2.5 2.4
2.5 2.4
4.2full loadfront rear
2.5 2.5
2.6 2.6
2.6 2.6
2.6 2.6
2.7 2.6
2.8 2.7
2.8 2.7
4.2