2006 Alfa Romeo 159 ECU

250
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
IDENTIFICATION LABEL
This is to be found in the engine com-
partment, aside the upper right shock-
absorber connection and it bears the fol-
lowing identification data:
A.Space for details of national ho-
mologation
B.Space for punching the consecutive
chassis number
IDENTIFICATION
DATA
You are advised to note the identifica-
tion codes. The identification data
stamped and given on the plates and
their position are the following fig. 1:
1- Identification label
2- Body label
3- Bodywork paint identification label
4- Engine label.C.Space available for maximum
weights authorised by various national
regulations
D.Space for version and any supple-
mentary indications to those specified
E.Space for smoke coefficient (diesel
versions only)
F.Space for punching the Manufactur-
er’s name.
A0A0045mfig. 1A0E0013mfig. 2

ODDMENT COMPARTMENTS
fig. 8 - 9
The boot sides are equipped with two odd-
ment compartments closed by a cover.
To open the cover press button Aand
turn it downwards.
274
ALFA 159 SPORTWAGONIf you want to carry
reserve fuel in a can,
follow law regulations, only
using a certified can, suitably
fastened to the load securing
eyelets. Even in this way the
risk of fire is increased in the
case of an accident.
WARNING
A heavy load that has
not been secured may
cause serious harm.
WARNING
A0E0273mfig. 8
A0E0272mfig. 9
A0E0270mfig. 6A0E0271mfig. 7
ANCHORING THE LOAD
The boot houses 4 hooks (see fig. 6
andfig. 7) for anchoring ropes in or-
der to guarantee perfect load anchoring.
Hooks shall also be used to secure the
luggage retaining net (available as op-
tional, for versions/markets where ap-
plicable, at Alfa Romeo Authorised Ser-
vices).

Use the seats A-fig. 13located in the
front part of the boot to hook the net as
shown in fig. 16.
Using seats B-fig. 14to secure the net
to the rear side of the boot.
276
ALFA 159 SPORTWAGON
A0E0275mfig. 13A0E0276mfig. 15
A0E0277mfig. 16
To secure the net, fit hooks A-fig. 15
into seats Band press downwards.
To release the net, take it out upwards
while keeping button Cpressed.
A0E0308mfig. 14

PASSENGER'S
COMPARTMENT UPPER
SEPARATION NET
(where provided)
In addition to the luggage compartment
cover, certain versions are also fitted
with a passenger's compartment upper
separation net fig. 20.
The net for separating the passenger's
compartment from the boot is contained
into a special bar.
A0E0283mfig. 20A0E0287mfig. 21
A0E0288mfig. 22
To extend it, take it out of the reel by
taking tongue A-fig. 21and secure
endsB-fig. 22into the two housings
C-fig. 23(one per side) located on
the roof of the car.
278
ALFA 159 SPORTWAGON
Do not put objects on
the cover which may
damage it.
The objects put on the
cover may be thrown
forwards and injure passen-
gers should you brake sharply
or in the event of an accident.
Your are recommended to use
the passenger's compartment
separation net.
WARNING

281
ALFA 159 SPORTWAGON
It is possible to mount both the tradi-
tional restraint system and the "Univer-
sal Isofix" one. Remember that in case
of Universal Isofix child's seats, you can
only use all those seats approved with
the ECE R44/03 writing "Universal
Isofix".
PRESETTING FOR
MOUNTING THE
"UNIVERSAL
ISOFIX" CHILD
RESTRAINT SYSTEM
This car is preset for mounting the Uni-
versal Isofix child restraint system, a
new European standardised system for
carrying children safely. fig. 28shows
an example of child restraint system.
The Universal Isofix child's seat covers
weight group 1.
Due to its different anchoring system,
the Universal Isofix child's seat shall be
anchored to the proper lower metal fas-
tenersA-fig. 29, set between rear
seat back and cushion. The upper belt
(available with the child's seat) shall be
then secured to fastener B-fig. 30set
in the boot at child's seat level.To use fastener B, proceed as follows:
❒tilt the rear set backrest (see para-
graph "Boot" in section "Dashboard
and controls");
❒pull up fastener Band then secure
the belt to the fastener.
A0E0174mfig. 29
A0E0289mfig. 30
fig. 28A0E0241m

283
ALFA 159 SPORTWAGON
Taillight bulb on tailgate
To replace the bulbs proceed as follows:
❒open the tailgate;
❒remove the cover A-fig. 31work-
ing in the point shown by the arrow;
❒remove the bulb holder unit by press-
ing the retaining tabs B-fig. 32;
❒remove and replace the burnt-out
bulb by pressing it slightly and turn-
ing it counterclockwise fig. 33:
C: reversing light bulb on passenger
side or right side;
C: rear fog light bulb on driver side or
left side;
❒refit the bulb holder unit securing it
properly using the retaining tabs B-
fig. 32;
❒close cover A-fig. 31.
A0E0294mfig. 33
❒remove and replace the burnt-out
bulb by pressing it slightly and turn-
ing it counterclockwise fig. 33:
D: taillight bulb on right/left headlight
❒refit the bulb holder unit securing it
properly using the retaining tabs B-
fig. 32;
❒close cover A-fig. 31.

284
ALFA 159 SPORTWAGON
Direction indicators/
Taillights/Brake lights
To replace the bulbs proceed as follows:
❒open the tailgate;
❒on certain versions, open the side lid;
❒remove the protection cover by op-
erating device A-fig. 34;
A0E0296mfig. 35A0E0297mfig. 36
A0E0298mfig. 37
❒remove the bulb holder unit by press-
ing the retaining tabs B-fig. 35;
❒remove and replace the burnt-out
bulb by pressing it slightly and turn-
ing it counterclockwise fig. 36:
E:taillight/brake light bulb;
F:direction indicator bulb
❒refit the bulb holder unit securing it
properly using the retaining tabs B-
fig. 35;
❒refit the protection cover.
A0E0295mfig. 34
ADDITIONAL BRAKE LIGHT
(THIRD STOP)
The additional brake light is made up of
LEDs and it is built into the rear spoiler
fig. 37.
Contact Alfa Romeo Authorized Services
to have the third brake light replaced.