2006 Alfa Romeo 156 trip computer

GETTING TO KNOW YOUR CAR64
INFOCENTER DISPLAY(where required)The Infocenter display is able to display all
the useful and necessary information during
driving, in particular:
INFORMATION AVAILABLE ON STANDARD
SCREEN
– Date (A-fig. 87)
– Outside temperature (B)
– Failure and warning symbol (e.g.: pos-
sible presence of ice on the road C).The standard screen will remain on until
a function is activated which requires be-
ing shown on the display (e.g. “Infocenter
display rheostat lights adjustment”).
INFORMATION ABOUT VEHICLE
CONDITION (for each event)
– Scheduled maintenance programme ex-
piry
– Trip computer information
– Rheostat brightness adjustment
– Engine oil level (only JTD versions).
Moreover, a menu is available which al-
lows the driver to perform, by operating the
control buttons (see “Control buttons” in the
next pages) the following controls and set-
tings:Set-up menu
SPEED LIMIT
– Switching on/off the relevant signal
(ON/OFF)
– Speed limit setting
TRIP B ON/OFF
– Switching on/off the relevant function
(ON/OFF)
DATE SETTING/TIME SETTING
– Day setting
– Month setting
– Year setting
– Hour setting
– Minute setting
LANGUAGE SELECTION
– Setting the language for the messages
shown on the displayfig. 87
A0B2126g

GETTING TO KNOW YOUR CAR66
CONTROL BUTTONS
(fig. 88-89)
To make use of the information that the Infocenter display (with the key in the MAR position) is able to provide, you should first get fa-
miliar with the relevant control buttons (placed on the central console aside the climate control/ventilation controls and on top of the left
lever for the Trip computer function) and use them in accordance with the descriptions below. It is also recommended that you read over this
chapter before performing any operation.
fig. 88fig. 89
ã
SET button
A single press for less than 2 seconds (pulse), shown by
ä
in the following
screens, to scroll the different Trip computer information screens
A single press for more than 2 seconds, shown by
å
in the following screens,
to reset the Trip computer information (reset) and initiate a new mission INFO,
â
, ã
buttons
Depending on the cases: to scroll the menu screens and their respective options
upwards or to increase the displayed value
Depending on the cases: to scroll the menu screens and their respective options
downwards or to decrease the displayed value A single press for less than 2 seconds (pulse), shown by
ç
in the following
screens, to confirm the desired option and/or switch to the next screen or ac-
cess the menu
A single press for more than 2 seconds, shown by
é
in the following screens,
to confirm the desired option and return to the previous screen
A0A0013m
A0A0014m

GETTING TO KNOW YOUR CAR87
GENERAL TRIP - TRIP BThe TRIP COMPUTER function gives information relating to the operating status of the vehicle on the Infocenter display. This function comprises
the GENERAL TRIP concerning the complete mission of the car and TRIP B concerning the partial car mission. This function (as shown in the
graph below) is contained within the complete mission. Both functions are resettable.
The GENERAL TRIP displays the figures relating to
RANGE
, TRAVEL DISTANCE
, AVERAGE CONSUMPTION
, ACTUAL CONSUMPTION
, AVERAGE VELOCITY
, TRAVELTIME
(com-
plete mission time).
The TRIP B (with automatic reset each time at least 2 hours have passed since stopping the engine), displays information concerning TRAVEL
DISTANCE B
, AVERAGE CONSUMPTION B
, AVERAGE SPEED B
, TRAVEL TIME B
(partial mission time).
Start of journey procedure (reset)
To start a new journey monitored by the GENERAL TRIP, with the ignition key at MAR, press the button
ã
with
å
(see “Control buttons”).
The reset operation (pressing the
å
button) in the presence of the screens concerning the GENERAL TRIP also makes it possible to reset
TRIP B. The reset operation (pressing the å
button) in the presence of only the screens concerning TRIP B makes it possible to reset only the
information associated with this function.
WARNINGThe
RANGE
and
ACTUAL CONSUMPTION
information cannot be reset.
Reset TRIP B
End of partial mission
Start of new partial mission
˙
Reset TRIP B
End of partial mission
Start of new partial mission
˙
˙
Reset TRIP B
˙
˙
˙
TRIP B
TRIP B
TRIP B
End of partial mission
Start of new partial missionReset TRIP B
End of partial mission
Start of new partial mission
GENERAL TRIP
Reset GENERAL TRIP
End of complete mission
Start of new mission
˙
Reset GENERAL TRIP
End of complete mission
Start of new mission
˙

GETTING TO KNOW YOUR CAR88
WARNINGAt the beginning of a new mission, due to battery reconnection, the average consumption value is initialised to the “average
predefined standard consumption” equal to 9 l/100 km(for 1.6 T.SPARK, 1.8 T.SPARK, 2.0 JTS and 2.0 JTS Selespeed versions),
12 l/100 km(for 2.5 V6 24V and 2.5 V6 24V Q-System versions) and 6.5 l/100 km(diesel versions only).
The TRIP COMPUTER information is displayed in sequence according to the table below.
Reset GENERAL TRIP and TRIP B, excluding
Range and Actual Consumption
(see next paragraph
RESET GENERAL TRIP
)ä
ä
ää
äå
ä
å
ä
åå å
See INITIAL CHECK and ACCESS
TO THE MENU SCREEN
Continues on
next page
Previously set screen;
e.g.

GETTING TO KNOW YOUR CAR91
RANGE= This shows the distance (in km or miles) the car can still cover before needing fuel if keeping the same driving conditions. The
display will show “- - - -“ after the following events:
A)range values lower than 50 km (approx. 31 miles) (after the reduced range warning message),
B)Parking with running engine or car speed lower than 4 km/h for over 5 minutes.
TRAVEL DISTANCE= This shows the distance traveled by the car from the start of the new mission (*).
AVERAGE CONSUMPTION= This shows the average actual consumption in l/km or in l/100 km depending on the unit selected.
ACTUAL CONSUMPTION= This shows the consumption of the car updated every 5 sec. approx. If parking with running engine or in
case of speed values lower than 4 km/h the display will show “- - - -“. Actual consumption calculation algorithm, according to the above pro-
cedure, restarts as soon as the car speed will be equal to or higher than 4 km/h.
AVERAGE VELOCITY= This shows the average speed of the car as a function of the overall travel time elapsed from the start of the
new mission (*).
TRAVELTIME= time elapsed from the start of the new mission (*).
(*) NEW MISSION: this takes place when performing the “manual” reset by pressing the dedicated button.
WARNINGGENERAL TRIP is reset automatically when the Distance Traveled is equal to 9999,9 km (or mi), when Travel Time is 99:59
(99 hours and 59 minutes) or after reconnecting the battery.
WARNINGIf no information is available, all the TRIP COMPUTER parameters display the message “****” instead of a value, together
with the typical description of each parameter. When the normal operation condition is resumed, the count of the various parameters starts
again normally, with no reset of the values displayed prior to the failure, nor the start of a new mission.