2006 Alfa Romeo 147 phone

GETTING TO KNOW YOUR CAR
76
DISPLAYS IN CONCURRENCE WITH THE EVENT
Standard screen:
when the radio is
turned on in the
RADIO DISPLAY ON
condition.
Standard screen:
when a phone call is
received in the TELEPHONE
DISPLAY ON condition.Display with the ignition key removed opening
or closing a door.
The reconfigurable multifunction display
together with the mileage recorder display
(total and trip) is timed, after 10 seconds it
goes off automatically.
In the event of a failure
see the “Warning lights”
chapter.Standard screen:
during assisted
navigation in the
NAVIGATION DISPLAY
ON condition.
The displays illustrated are purely
indicative.
fig. 71
A0A0429m

GETTING TO KNOW YOUR CAR
125
CELL PHONE
PROVISION
The car may be fitted with a provision for
installing a cell phone.
The mobile phone provision consists in:
– Radio + cell phone dual-purpose anten-
na;
– Connection and supply cables with spe-
cific connector for connecting hands-free kit.
For the installation of a
cell phone and connection
to the provision in the car,
contact only Alfa Romeo Autho-
rised Services; this will guarantee
first-rate results with no possibil-
ity of any inconvenience that may
compromise the safety of the ve-
hicle.
The voice kit should be
purchased by the customer
as it must be compatible
with the customer’s phone.
SUN VISORS (fig. 121)
The visors can be directed at the front and
side.
Behind the visors have a courtesy mirror
with a light at the side (A). To use, open
the cover (B).
The lights allow use of the mirrors with dim
light.
fig. 121
A0A0121m
ACCESSORIES
PURCHASED
BY THE OWNER
If after buying the car, you decide to install
electrical accessories that require a perma-
nent electric supply (alarm, voice feature,
radionavigator with satellite antitheft, etc.)
or accessories that in any case burden the
electric supply, contact Alfa Romeo Autho-
rised Services, whose qualified personnel,
besides suggesting the most suitable devices
belonging to Lineaccessori Alfa Romeo, will
also evaluate the overall electric absorption,
checking whether the vehicle’s electric sys-
tem is able to withstand the load required,
or whether it needs to be integrated with a
more powerful battery.

GETTING TO KNOW YOUR CAR
126
SLIDING FORWARDS/
BACKWARDS
With the ignition key at MARturn the
control knob (A-fig. 122), in the direc-
tion of the arrow, choosing one of the 6
opening positions available.
To close the roof, take the control knob
(A) to the centre position.
The sunroof is fitted with a sliding curtain
below, which prevents sun radiation and is
drawn by hand using a catch.
The curtain is drawn by the roof when it
opens and is pushed completely inside the
roof panel when the sunroof is opened com-
pletely. With the closing movement, it will
come out partially so that the hand catch
is accessible (fig. 123).
fig. 122
A0A0123m
SUNROOF RADIO
TRANSMITTERS
AND CELL PHONES
Cell phones and other radio transmitter de-
vices (CB for instance) may not be used in-
side the car, unless a separate aerial is used
fitted outside the car.
Moreover the transmission and reception
efficiency of these devices may be down-
graded by the screening effect of the car
body.
The use of cell phones, CB
transmitters or the like in-
side the passenger compartment
(without outside aerial) produces
radio frequency electromagnetic
fields which, amplified by the reso-
nance effects inside the passenger
compartment, may cause, besides
potential health hazards for the
passengers, also malfunctioning of
the electronic systems with which
the vehicle is fitted, such as engine
control unit, ABS/EBD control unit
etc., which could adversely affect
vehicle safety.
WARNING
Do not open the sunroof
with snow or ice on it:
damage may result.
WARNING
Open and close the sunroof
only with the vehicle sta-
tionary.
WARNING
Improper use of the sunroof
can be dangerous. Before
and while operating it, always
make sure that the passengers are
not exposed to the risk of harm
caused either directly by the sun-
roof in motion or by personal items
drawn or knocked by it.
WARNING

GETTING TO KNOW YOUR CAR
146
CLR (Clear)
Function with which it is possible to clear
all the tracks of the CD stored with the TPM
function.
EON (Enhanced Other Network)
Function that allows the radio to tune au-
tomatically on a different radio station than
the one being listed to which broadcasts traf-
fic information.
Fader
Function with which it is possible to ap-
propriately adjust the sound from the front
or rear speakers.
Hicut (Treble reduction)
Function with which it is possible to reduce
the treble tones, in accordance with the sig-
nal transmitted.Distant/Local (Sens Dx/Loc)
These are the two levels of reception sen-
sitivity.
1) Distant (maximum sensitivity), which
makes it possible to tune all the stations that
can be received.
2) Local (minimum sensitivity), which
makes it possible to tune only those stations
with sufficiently strong signals, such as for
example local stations.
Loudness
A function that automatically emphasises
the bass and treble tones when listening, at
low level. It is cut off with the volume set
to the maximum.
Mix
This function is used to randomly select a
Compact Disc among those present in the
loader and all the tracks on this Compact
Disc are played in random sequence.MSS
(Searching previous/next track)
With this function it is possible to listen to
the next or previous track on the cassette.
Mute
Function which, if activated, for example
in the presence of a cell phone in the car,
brings the volume to zero when a phone call
is being made/received.
Presettings
Number of radio stations that can be stored
manually or automatically.
PTY (Program Type)
This function allows the presetting of a cat-
egory of programmes such as for instance,
news bulletins, music, sport, etc. The set au-
tomatically gives priority to the type of pro-
gramme selected when transmission starts,
interrupting the one in progress.

GETTING TO KNOW YOUR CAR
147
RDS (Radio Data System)
This is a radiophonic information system
which uses the 57 kHz subcarrier of normal
FM broadcasts.
With this function it is possible to receive
different types of information such as traf-
fic bulletins and station names and to au-
tomatically tune to a station with the
strongest signal that is broadcasting the
same programme.
REG (Regional transmission
reception function)
Function with which it is possible to tune
only to local (regional) stations.
Repeat
Function with which it is possible to con-
tinuously listen to the last track played on
the Compact Disc.
Scan
Function with which it is possible to listen
for a few seconds to all the radio stations
stored, or the beginning of all the tracks con-
tained on the Compact Disc.Scrolling
Function with which it is possible to receive
different programmes in the same network
(in the FM band only).
PLL Tuning
Digital tuning with Phase Lock Loop circuit
to obtain the best radio channel tuning.
Soft Mute
Function that gradually highers and low-
ers the volume when Mute is turned on or
off.
Sound Flavour
A function that sets the best equalizing pos-
sible depending on the type of music se-
lected (Classic, Jazz, Rock, etc).
SVC
Function that automatically adjusts the lev-
el of the volume to the speed of the car to
maintain the ratio with the noise level in the
passenger compartment.TA (Traffic information)
Function with which it is possible to receive
the traffic information broadcast by the sta-
tions enabled, also when tuned to another
station or listening to a cassette, CD, or dur-
ing a phone call.
TPM (Track Program Memory)
Function with which it is possible to store
the sequence for playing the tracks of a CD,
to be able to play them later in the sequence
set.
Treble
This adjusts the treble tones.

GETTING TO KNOW YOUR CAR
151
The functions that cannot be selected (e.g.
“CD” when the Compact Disc is not insert-
ed) are disabled automatically. If the Com-
pact Disc is not inserted and the CD-Chang-
er is not connected, pressing the “SRC” but-
ton (14) for about 2.5 seconds the display
will show only “NO CD”.
IMPORTANTWhen listening to the ra-
dio with a Compact Disc inserted and the
CD-Changer connected, pressing the “SRC”
button (14) will select the last function used
between Compact Disc and CD-Changer.
Pause function
If while listening to a Compact Disc another
function is selected (e.g. the radio), playing
is stopped and when the Compact Disc mode
is resumed. it starts again from the point
in which it was stopped.
If while listening to the radio another func-
tion is selected, when the Radio mode is
resumed, it is tuned to the last station se-
lected.Volume adjustment
Press button “VOL+” (21) to higher the
volume or “VOL-” (19) to lower it.
Pressing the button briefly the change is
gradual by steps. Pressing longer, the
change is fast. For a few seconds the dis-
play shows the wording “VOL” and the vol-
ume level (from 0 to 66).
If the volume level is changed during the
broadcast of a traffic bulletin or during use
of the phone (if the voice feature is in-
stalled), the new setting is maintained on-
ly until the end of the bulletin or phone call.
Volume changing with speed
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the noise
level inside the passenger compartment.
To activate the SVC function briefly press
(less than 1 second) the “MENU” button
(9), then use buttons “
▲” (6) or “▼” (8)
to scroll the menu functions stopping on the
SVC function and buttons “
˙˙” (7) or
“
¯¯” (4) to turn the function on or off se-
lecting respectively “SVC ON” or “SVC
OFF”.
This function can be turned on or off in all
the operating modes of the device (Ra-
dio/Compact Disc/CD-Changer).Mute function (turning off the
volume completely)
To turn on the Mute function briefly press
(less than 1 second) the “
z” button (20).
The volume will lower gradually (Soft Mute
function) and the display will show
“MUTE”.
To turn the Mute function off, briefly press
the “
z” button again (20). The volume
will increase gradually (Soft Mute function)
returning to the value set before using the
Mute function.
The Mute function is also turned off press-
ing one of the volume adjustment buttons
“VOL+” (21) or “VOL-” (19): in this
case the volume is changed directly.
With the Mute function on, all the other
functions can be used and if a traffic bul-
letin arrives with the TA function on or an
emergency alarm is received, the message
ignores the Mute function.

GETTING TO KNOW YOUR CAR
153
TELEPHONE PROVISION
(fig. 137)
If the voice kit is installed on the car, when
a phone call is received the radio sound is
connected to the phone input. The telephone
sound is heard with a fixed volume, but it
can be adjusted during the conversation us-
ing “VOL+” (21) to higher the volume or
“VOL-” (19) to lower it.
The fixed telephone volume can be ad-
justed through the “PHONE” function of
the menu (see“MENU” paragraph). The only buttons active during phone calls
are:
– “VOL+” (21), “VOL-” (19): for
volume adjustment
– “ON” (20): turning the radio on/off
– “AF-TA” (1): traffic information.
While the sound is off for a phone call, the
display shows the word “PHONE”.
The sound of the phone call will be inter-
rupted in the case of transmission of a traf-
fic bulletin or a PTY31 announcement; if
wishing to interrupt the bulletin press the
“AF-TA” button (1).
RADIO(fig. 137)
When the set is turned on the last function
selected before turning off is played (Radio,
Compact Disc or CD-Changer).
To select the Radio function while listening
to a Compact Disc, briefly and repeatedly
press the “SRC” button (14) until this
function is selected.
Selecting the frequency band
If in the Radio mode, briefly and repeat-
edly press the “BN” button (13) to select
the required reception band.
Every time the button is pressed the fol-
lowing bands are selected in sequence
“FM1”, “FM2”, “FMT”, “MW” and
“LW” shown by the respective wording on
the display.
The FM band is divided into section: FM1,
FM2 and FMT.
The FMT reception band is reserved to the
stations stored automatically with the Au-
tostore function.
The radio is always ready to receive sta-
tions in the RDS Mode (Radio Data System).

GETTING TO KNOW YOUR CAR
161
Controlling the station’s type of
PTY programme
To know the type of PTY programme of
the station heard, keep the “PTY” (2)
pressed until a “beep” is heard. After the
“beep” the display will show the type of pro-
gramme (see previous paragraph) offered
by the station tuned. If the station has no
PTY code, the display will show the wording
“NO-PTY”. After about 5 seconds the dis-
play will again show the RDS name or fre-
quency of the station tuned.
EON Function
(Enhanced Other Network)
Some countries have circuits which group
together several stations enabled to broad-
cast traffic information. In this case the pro-
gramme of the station being heard, will be
interrupted temporarily to receive traffic in-
formation (only with the TA function on),
every time these bulletins are given by one
of the stations of the same circuit. Scrolling transmissions
It is possible to receive different pro-
grammes in the same network and scroll
them in FM Band only) - e.g.: NDR1, NDR2,
NDR3, NDR4, N-JOY...
To turn on this function, briefly press the
“AF-TA” button (1) to turn on the AF func-
tion. The user can then start scrolling press-
ing “
˙˙” (7) or “¯¯” (4).
IMPORTANTThe station must have
been received previously at least once.
Stereophonic stations
If the signal received is weak, the device
switches automatically from Stereo to Mono.
MENU(fig. 137)
Functions of “MENU” button (9)
To turn on the menu function briefly press
(less than 1 second) the “MENU” button
(9). The display will show the word
“MENU”.
To scroll the Menu functions use “
▲” (6)
or “
▼” (8). To turn on/off the function se-
lected use “
˙˙” (7) or “¯¯” (4).
The display will show the current status
of the function selected.
The functions controlled by the menu are
the following:
–EQ SET(Equalizer settings, only if the
equalizer is on)
–PRESET/USER/CLASSIC/
ROCK/JAZZ(Turning on/off and choos-
ing predefined equalizer adjustments)
–HICUT(Treble reduction)
–PHONE(Volume of phone, if installed)
–CD NAME(Allocation of CD names,
only with CD inserted)
–SVC(Automatic volume control in re-
lation to speed)
–SENS DX/LO(Tuning sensitivity)
–CD(CD display setting)