Page 202 of 255

If you need to park your vehicle f or
an extended period (more than 1
month), there are several things you
should do to prepare it f or storage.
Proper preparation helps prevent
deterioration and makes it easier to
get your vehicle back on the road. If
possible, store your vehicle indoors.Fill the f uel tank.
Change the engine oil and f ilter.
Wash and dry the exterior
completely.
Cleantheinterior.Makesurethe
carpeting, floor mats, etc., are
completely dry. Block the rear wheels.
If the vehicle is to be stored f or a
longer period, it should be
supported on jackstands so the
tires are of f the ground.
Leave one window open slightly (if
the vehicle is being stored
indoors).
Disconnect the battery.
Support the f ront and rear wiper
blade arms with a f olded towel or
ragsotheydonottouchthe
windshield.
To minimize sticking, apply a
silicone spray lubricant to all door
and hatch seals. Also, apply a body
wax to the painted surf aces that
mate with the door and hatch seals.Cover the vehicle with a
‘‘breathable’’ cover, one made
f rom a porous material such as
cotton. Non-porous materials, such
as plastic sheeting, trap moisture,
which can damage the paint.
If possible, periodically run the
engine until it reaches f ull
operating temperature (the
cooling f an cycles twice).
Pref erably, do this once a month.
If you store your vehicle f or 12
months or longer, have your dealer
perf orm the inspections called f or in
the 24 months/30,000 miles (48,000
km) Maintenance Schedule (Normal
Conditions) as soon as you take it
out of storage (see page ). The
replacements called f or in the
maintenance schedule are not
needed unless the vehicle has
actually reached that time or mileage.
Leave the parking brake off. Put
the transmission in reverse
(manual) or Park (automatic). 169
Vehicle Storage
Maint enance
201
Page 205 of 255

Use the compact spare tire as a
temporary replacement only. Get
your regular tire repaired or replaced,
and put it back on your vehicle as
soon as you can.
Check the inf lation pressure of the
compact spare tire every time you
check the other tires. It should be
inf lated to:
Follow these precautions:Never exceed 50 mph (80 km/h)
under any circumstances.
This tire gives a harsher ride and
less traction on some road sur-
f aces. Use greater caution while
driving. Do not use your compact spare
tire on another vehicle unless it is
thesamemakeandmodel. Do not mount tire chains on the
compact spare tire.
Replace the tire when you can see
the tread wear indicator bars. The
replacement tire should be the same
size and design as the original tire
and mounted on the same wheel.
The spare tire is not designed to be
mounted on a regular wheel, and the
spare wheel is not designed f or
mounting a regular tire.
Compact Spare Tire
204
INDICATOR LOCATION MARK
TREAD WEAR INDICATOR BAR
60 psi (420 kPa , 4.2 kgf/cm)
Page 226 of 255

µµ
CONT INUED
If your vehicle needs to be towed,
call a prof essional towing service or
an organization. Never tow your
vehicle with just a rope or chain. It is
very dangerous. With the f ront wheels on the ground,
it is best to tow the vehicle no farther
than 50 miles (80 km), and keep the
speedbelow35mph(55km/h).
Release the parking brake. Turn of f the engine.
ShifttoD,thentoN.
Start the engine. Shif t the transmission to neutral. Release the parking brake.
If , due to damage, your vehicle must
be towed with the f ront wheels on
the ground, do this:
Therearetwowaystotowyour
vehicle: The operator
loads your vehicle on the back of a
truck.
The tow
truck uses two pivoting arms that go
under the tires (f ront or rear) and lif t
them of f the ground. The other two
tires remain on the ground.
Automatic Transmission:
Manual Transmission:
Emergency Towing
Flat -bed Equipment
Wheel-lif t Equipment
This is the best way to trans-
port your vehicle.
T his is
an acceptable way to tow your
vehicle.
T aking Care of t he Unexpect ed
225
Trying to lif t or tow your vehicle by the
bumpers will cause serious damage.
The bumpers are not designed to
support the vehicle’s weight.
Improper towing preparation will
damage the transmission. Follow the
above procedure exactly. If you cannot
shif t the transmission or start the
engine (automatic transmission), your
vehicle must be transported with the
f ront wheels of f the ground.
Page 228 of 255

Thediagramsinthissectiongive
you the dimensions and capacities of
your vehicle, and the locations of the
identif ication numbers. It also
includes inf ormation you should
know about your vehicle’s tires and
emissions control systems.................
Identif ication Numbers .228
................................
Specif ications .230
DOT Tire Quality Grading ......................
(U.S. Vehicles) .232
Unif orm Tire Quality ..................................
Grading .232
.................................
Treadwear .232
......................................
Traction .232
.............................
Temperature .233
.................................
Tire Labeling .234.......................
Emissions Controls .235
.....................
The Clean Air Act .235
Crankcase Emissions Control ....................................
System .235
Evaporative Emissions Control ....................................
System .235
Onboard Ref ueling Vapor ................................
Recovery .236
...
Exhaust Emissions Controls .236
....................
PGM-FI System .236
Ignition Timing Control ................................
System .236
Three Way Catalytic ...........................
Converter .236
....................
Replacement Parts .236
..
Three Way Catalytic Converter .237
..............
State Emissions Testing .238
T echnical Inf ormation
Technical Inf ormation
227
Page 232 of 255

µ
µ
Î
Î
Î
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Î
Î
Î
ÎÎ
Î
Specif ications
Technical Inf ormation
231
Capacities
Fuses
Alignment
Battery Tires
Lights
0.0in(0mm)
0.08 in (2.0 mm) 0°30’
1.8 US qt (1.7
)
1.6 US qt (1.5)
2.9 US qt (2.7
)
6.9 US qt (6.5)
2.6 US qt (2.5)
4.8 US qt (4.5)
1°00’
2°53’
P205/55R16 89V
P195/65R15 89H
Manual
transmission
fluid
Interior
Under-hood
Toe-in
Camber
Caster
12 V
12 V
12 V 12 V
5W 65 W
21 W 55 W
60 psi (420 kPa , 4.2 kgf/cm
)
31 psi (220 kPa , 2.2 kgf/cm)
31 psi (220 kPa , 2.2 kgf/cm)
T125/70D16 96M
T135/70D15 99M
Capacity 12 V 36 AH/5 HR12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
3.4 W
8W
5W
8W
5W
18 W
5W
21 W
21 W/5 W
21 W
12 V 5 W
Size
Pressure P215/45R17 87V
Headlights
Front turn signal lights
Front parking lights
Front side marker lights
Rear turn signal lights
Brake/Taillights
High-mount brake light
Rear side marker lights
Back-up lights
License plate lights
Ceiling light
Cargo area light
Spotlights
Glove box light See page223or the fuse label
attached to the inside of the fuse
box door under the dashboard.
See page224or the fuse box
cover.
High
Low Front
Rear
Front
Rear
Front
Type-S
Change
Total
Change
Total
U.S. vehicles
Canadian
vehicles
1:
2:
3:Front/Rear
Spare
Front
Rear
Spare
(HB3)
(Amber)
(Amber)
Canadian standard model
U.S. base model and Canadian Premium models
Automatic trans-
mission fluid
Windshield
washer reservoir
1
2
3
1, 2
3
Page 233 of 255

µ
Quality grades can be f ound where
applicable on the tire sidewall
between the tread shoulder and the
maximum section width. For
example: The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices, and dif f erences in
road characteristics and climate.The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
All passenger vehicle tires must
conf orm to Federal Saf ety
Requirements in addition to these
grades. The tires on your vehicle meet all
U.S. Federal Saf ety Requirements.
All tires are also graded f or
treadwear, traction, and temperature
perf ormance according to
Department of Transportation
(DOT) standards. The f ollowing
explains these gradings.
DOT Tire Quality Grading (U.S. Vehicles)
Unif orm T ire Quality Grading
T readwear 200
Traction AA
Temperature A Treadwear
Traction AA, A, B, C
232
Page 234 of 255

µWarning: The temperature grade f or
this tire is established f or a tire that
is properly inf lated and not
overloaded. Excessive speed,
underinf lation, or excessive loading,
either separately or in combination,
can cause heat buildup and possible
tire f ailure.
The temperature grades are A (the
highest), B, and C, representing the
tire’s resistance to the generation of
heat, and its ability to dissipate heat
when tested under controlled
conditions on a specif ied indoor
laboratory test wheel. Sustained high
temperature can cause the material
of the tire to degenerate and reduce
tire life, and excessive temperature
can lead to sudden tire f ailure. Grade
C corresponds to a level of
perf ormance that all passenger car
tires must meet under the Federal
Motor Vehicle Saf ety Standard No.
109. Grades B and A represent
higher levels of perf ormance on the
laboratory test wheel than the
minimum required by law.
DOT Tire Quality Grading (U.S. Vehicles)
Temperature A,B,C
Technical Inf ormation
233
Page 235 of 255

µ
µ
µ
µ
µ
µ µ
µ
µ
µ µ
µ
µ Rim diameter in inches.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
The tire identif ication number (TIN)
is a group of numbers and letters
that look like this example:This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.Manuf acturer’s
identification mark.
Whenever tires are replaced, they
should be replaced with tires of the
same size. Below is an example of
tire size with an explanation of what
each component means.
Vehicletype(Pindicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial). Tire type code.
Date of manufacture.
Max Press The maximum air pressurethetirecan
hold.
Max Load The maximum load the tire can carry at
maximum air pressure.
P
55
R V 16
DOT
B97RFW6X
2202
205 89
Tire Labeling
Tire Size
T ire Ident if icat ion NumberMaximum T ire Pressure
Maximum T ire L oad
234
DOT B97R FW6X 2202
P205/55R16 89V