2006 Acura MDX audio

Thevoiceof theHFLcanbesetto
male or f emale (U.S. models only).
Also, the incoming notif ication can
be set to a ring tone, a prompt, or no
notification.Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘System.’’ The HFL
response is, ‘‘System options are
setup and clear.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Ring tone’’ or ‘‘Prompt.’’
If you choose ‘‘Ring tone’’ you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ‘‘Prompt,’’ you
will hear this message to
announce an incoming call: ‘‘You
have an incoming call.’’ Press and release the top of the
TALK/BACK button. If you say
‘‘Yes’’ af ter the beep, the HFL
response is, ‘‘Would you like a ring
tone or a prompt?’’ If you say ‘‘No’’
af ter the beep, the HFL returns to
its main menu. Saying ‘‘No’’ will
result in no ring tone or prompt
playback during an incoming call.
The audio system will still mute,
and a message will be displayed.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Male’’ or ‘‘Female,’’
depending on the system voice
you want. The HFL response is,
‘‘Male (Female) prompts have been selected. Would you like an
audible notif ication of an incoming
call?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Setup.’’ The HFL
response is ‘‘Would you like male
or f emale prompts?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Security.’’ The HFL
response is ‘‘Security options are
lock, unlock, and set passcode.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Lock’’ or ‘‘Unlock.’’
Lock means the HFL will prompt
you f or your passcode each time
the ignition switch is turned to the
ON (II) position and you press the
Talk button. You will only be
askedforthepasscodeonceper
ignition cycle. If the HFL is locked,
its response is ‘‘System is locked.
Each time the vehicle is turned on,
the passcode will be required to
use the system.’’ If the HFL is
unlocked, its response is ‘‘The
system is unlocked. Returning to
the main menu.’’
2. 1.
4.
5.
3.
2. 1.
To set up the system, do this:
To lock or unlock the HFL, do this:
Setting Up the System
HandsFreeL ink
Features
165
TM

You can make calls using any phone
number, or by using a name in the
HFL phonebook. You can also redial
the last number called. During a call,
theHFLallowsyoutotalkupto30
minutes af ter you remove the key
from the ignition switch.With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the top of the TALK/BACK
button. After the beep, say ‘‘Call’’
or ‘‘Dial.’’ The HFL response is,
‘‘What name or number would you
like to call/dial?’’ With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the top of the TALK/BACK
button. After the beep, say ‘‘Call’’
or ‘‘Dial.’’ The HFL response is
‘‘Whatnameornumberwouldyou
like to call/dial?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Call’’ or ‘‘Dial.’’ The
HFL response is ‘‘Calling’’ or
‘‘Dialing.’’ Once connected, you
will hear the person you called
through the audio speakers. To
change the volume, use the audio
system volume knob. Press and release the top of the
TALK/BACK button. After the
beep, say the number you want to
call. For example, say ‘‘123 456
7891.’’ The HFL response is ‘‘123
456 7891. Say call, dial, or continue
to add numbers.’’
To end the call, press the bottom
of the TALK/BACK button. Press and release the top of the
TALK/BACK button. After the
beep, say the name you want to
call. For example, say ‘‘Eric.’’ The
HFL response is ‘‘Would you like
to call Eric?’’
1.
3.
1. 2.
2.
4.
To make a call using a phone number, do this: To make a call using a name in the HFL
phonebook, do this:
CONT INUED
Making a Call
HandsFreeL ink
Features
169
TM

Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Send.’’ The dial tones
will be sent, and the call will
continue.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Send.’’ The HFL
response is ‘‘What name or
number would you like to send?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the name you want to
send. For example, say ‘‘Account
number.’’ The HFL response is
‘‘Would you like to send account
number?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Send.’’ The dial tones
will be sent, and the call will
continue.
The HFL allow you to send numbers
or names during a call. This is usef ul
when you call a menu-driven phone
system. You can also program
account numbers into the HFL
phonebook f or easy retrieval during
menu-driven calls.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Send.’’ The HFL
response is, ‘‘What name or
number would you like to send?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the number you want to
send.Forexample,say‘‘1,2,3.’’
TheHFLresponseis‘‘1,2,3.Say
send, or continue to add numbers.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ The top
of the TALK/BACK response is
‘‘Calling’’ or ‘‘Dialing.’’ Once
connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob.
To end the call, press the bottom
of the TALK/BACK button.
To redial the last number called by
the phone, press and release the top
of the TALK/BACK button. After
the beep, say ‘‘Redial.’’ The HFL
response is, ‘‘Redialing.’’ Once
connected, you will hear the person
you called through the audio
speakers. To change the volume, use
the audio system volume knob. 1.
2.
1.
2. 3.
3.
4. 3.
To send a name during a call, do this:
To send a number during a call, do this:
Sending Numbers or Names
During a Call
HandsFreeL ink
170
TM

During a call, you can transfer it
f rom the HFL to your phone, or f rom
your phone to the HFL.
Press and release the top of the
TALK/BACK button. After the beep,
say ‘‘Transf er.’’ The audio switches
from the HFL to the phone.
Press and release the top of the
TALK/BACK button. After the beep,
say ‘‘Transf er.’’ The audio switches
f rom your phone to the HFL.Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Mute.’’ The HFL
response is, ‘‘Mute is cancelled.’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Mute.’’ The HFL
response is, ‘‘Mute is active.’’
During a call, you can mute or
unmute your voice to the person you
are talking to.
If you receive a call when you are not
on the phone, the HFL interrupts the
audio system (if it is on), and plays
the incoming call notif ication, if
activated. To answer the call, press
the top of the TALK/BACK button
and begin speaking. If you don’t want
to answer the call, press the Back
button.
If your phone has Call Waiting, and
you receive a call when you are on
the phone, press the Talk button to
answer it. When you do this, the
original call is placed on hold. To
return to the original call, press the
top of the TALK/BACK button
again. If you don’t want to answer
the new call, disregard it, and
continue with your original call. If
you want to hang up the original call
and answer the new call, press the
bottom of the TALK/BACK button. 2. 1.
To transfer a call from the HFL to your
phone, do this:
To transfer a call from your phone to theHFL, do this: To unmute your voice, do this:
To mute your voice, do this:
Transf erring a Call
Muting a Call
Receiving a Call
HandsFreeL ink
Features
171
TM

Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Yes.’’ The HFL
response is ‘‘Calling.’’ Once
connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob.This operation clears the HFL of
your passcode, your paired phones,
and all names in the HFL phonebook.
Clearing is recommended bef ore you
sell your vehicle.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘System.’’ The HFL
response is, ‘‘System options are
setup and clear.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Clear.’’ The HFL
response is, ‘‘This process will
clear all paired phones, clear all
entries in the phonebook, and
clear the passcode. Is this what
you would like to do?’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Yes.’’ The HFL
response is ‘‘Preparing to clear all
paired phones, all phonebook
entries, and the passcode. This
maytakeupto2minutesto
complete.’’ Press and release the
top of the TALK/BACK button.
Af ter the beep, say ‘‘OK’’ to
proceed, or say ‘‘Go back’’ or
‘‘Cancel.’’
If you said ‘‘OK,’’ af ter a short
period of time, the HFL response
is, ‘‘System has been cleared.
Returning to the main menu.’’
3.
4.
1.
2. 3.
To clear the system, do this:
HandsFreeL ink
Clearing the System
174
TM

Press this button to contact an
OnStar advisor. You will hear a
chime, f ollowed by the
announcement, ‘‘Connecting to
OnStar.’’ The connection should take
20 to 30 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on what service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a f ast busy signal.
The system will retry the connection
several times bef ore returning to the
ready mode.A microphone is located on the
ceiling, between the f ront map lights
and the console buttons you can
speak to the advisor without taking
your hands of f the steering wheel or
diverting your attention f rom the
road. The OnStar advisor’s voice
comes f rom the audio system’s
speakers. Use the volume control on
the audio system or on the steering
wheel to adjust the volume.
You can record up to 5 minutes of
inf ormation f rom your OnStar
AdvisorortheVirtualAdvisor.This
is helpf ul f or reviewing the route,
hotel, or restaurant information you
receive f rom the OnStar center.To record a message:
During your call, the Advisor or
Virtual Advisor, press and release
the OnStar button. The system
beeps to indicate that it is
recording.
When you are f inished recording,
press and release the OnStar
button again. The system beeps
and stops recording.
To hear the first playback of a
message:
Say ‘‘Advisor playback.’’ The
recorded message is played
through the audio system
speakers. Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar replay.’’
When you are f inished listening,
press the CALL ANSWER/CALL
END button. The system responds
with ‘‘Goodbye.’’
To cancel these retries, press the
white phone button.
OnStar Services Button
Recording an A dvisor or Virtual
Advisor Message
OnStar
176

µµ
µ µµ
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not ready for it, or there was too
much background noise. Repeat the
command after a short pause.
You
cansenddialtonesduringOnStar
Personal Calling. While in a personal call, press the
Voice Activated Key-Pad Button.
OnStar will respond with ‘‘First
digit to send please.’’
Say the f irst digit of the number
you want to send.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm the digit bef ore going to the next
digit.
OnStar will repeat that digit.
Say the second digit of the number.
Continue this until you have given
OnStar the complete number.
Then say ‘‘Send.’’ OnStar will send
the number by dial tones.
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the white phone button to
answer the call. When you have
completed the call, press the white
phone button again to hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a name tag. When you want
to place a telephone call, you can
recall the number by giving the system the name tag.
To store a
telephone number and its name tag
in the system:
Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Store.’’
OnStar will respond with ‘‘Phone
number to store, please.’’
Say the entire number.
OnStar will repeat the number,
andthensay‘‘YesorNo.’’
Say ‘‘Yes,’’ or say ‘‘No’’ to try again.
OnStar will respond with ‘‘Name
tag, please.’’
Say the name that you want
assigned to that telephone number.
Voice A ctivated K ey-Pad Incoming Telephone Calls
Using Name TagsStoring a Name T ag
OnStar
182

Modif ying your vehicle, or installing
some non-Acura accessories, can
make your vehicle unsaf e. Bef ore
you make any modif ications or add
anyaccessories,besuretoreadthe
f ollowing inf ormation.Bef ore installing any accessory:
Make sure the accessory does not
obscure any lights, or interf ere
with proper vehicle operation or
perf ormance.
Be sure electronic accessories do
not overload electrical circuits
(see page ) or interf ere with
proper operation of your vehicle.
Do not install accessories on the
side pillars or across the rear
windows. In these areas,
accessories may interf ere with
proper operation of the side
curtain airbags.
Your dealer has Acura accessories
that allow you to personalize your
vehicle. These accessories have
been designed and approved f or your
vehicle, and are covered by warranty.
When properly installed, cellular
phones, alarms, two-way radios, and
low-powered audio systems should
not interf ere with your vehicle’s
computer controlled systems, such
as your airbags, anti-lock brakes, and
Tire Pressure Monitoring System. If possible, have your dealer
inspect the f inal installation.
Although non-Acura accessories may
f it on your vehicle, they may not
meet f actory specif ications, and
could adversely af f ect your vehicle’s
handling and stability.
Bef ore installing any electronic
accessory, have the installer
contact your dealer for assistance.
If possible, have your dealer
inspect the f inal installation.277
A ccessories and Modif ications
A ccessories
Bef ore Driving
193
Improper accessories or
modifications can affect your
vehicle’s handling, stability, and
performance, and cause a
crash in which you can be hurt
or killed.
Follow all instructions in this
owner’s manual regarding
accessories and modifications.