Press this button to contact an
OnStar advisor. You will hear a
chime, f ollowed by the
announcement, ‘‘Connecting to
OnStar.’’ The connection should take
20 to 30 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on what service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a f ast busy signal.
The system will retry the connection
several times bef ore returning to the
ready mode.A microphone is located on the
ceiling, between the f ront map lights
and the console buttons you can
speak to the advisor without taking
your hands of f the steering wheel or
diverting your attention f rom the
road. The OnStar advisor’s voice
comes f rom the audio system’s
speakers. Use the volume control on
the audio system or on the steering
wheel to adjust the volume.
You can record up to 5 minutes of
inf ormation f rom your OnStar
AdvisorortheVirtualAdvisor.This
is helpf ul f or reviewing the route,
hotel, or restaurant information you
receive f rom the OnStar center.To record a message:
During your call, the Advisor or
Virtual Advisor, press and release
the OnStar button. The system
beeps to indicate that it is
recording.
When you are f inished recording,
press and release the OnStar
button again. The system beeps
and stops recording.
To hear the first playback of a
message:
Say ‘‘Advisor playback.’’ The
recorded message is played
through the audio system
speakers. Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar replay.’’
When you are f inished listening,
press the CALL ANSWER/CALL
END button. The system responds
with ‘‘Goodbye.’’
To cancel these retries, press the
white phone button.
OnStar Services Button
Recording an A dvisor or Virtual
Advisor Message
OnStar
176
µ
To hear a message again:
Say ‘‘Advisor playback.’’ The
system responds with ‘‘Play or
Resume.’’
If you say ‘‘Play,’’ the message
plays f rom the beginning. If you
say ‘‘Resume,’’ the message plays
f rom the point you previously
stopped it.
Recording a new message will delete
the previous message. Press this button to contact an
OnStar advisor only if you have an
emergency situation. You will hear a
tone, f ollowed by the announcement,
‘‘Connecting to OnStar Emergency.’’
Your call is given highest priority.
The advisor will ask about the nature
of the emergency, locate your
vehicle, and notif y the appropriate
emergency service agencies.
Press the ‘‘phone ’’ button to send
dial tones (example automated
phone systems) while in an OnStar
personal call.
PressthisCALLANSWER/CALL
END button to end a call to the
OnStar advisor. If the OnStar center
calls you, press this button to answer
the call.
This button is also used to initiate
the Personal Calling and Virtual
Advisor services, if you have
subscribed.
Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar ready.’’
Emergency Button
Call A nswer/Call End
ButtonVoice A ctivated K eypad
OnStar
Features
177
µµ
The Luxury and Leisure plan
provides all the benef its of the other
plans, and adds:
An OnStar advisor can assist you
with purchasing theater tickets,
airline tickets, rental car reservations
for a vacation, and just about any
other purchase you desire. The OnStar Personal Calling plan is
an extra-cost option that gives you
the ability to use your vehicle’s
OnStar system as a hands-f ree
cellular telephone.
To sign up f or Personal Calling,
press the OnStar button in your
vehicle, and notify the advisor that
you’d like to sign up. The advisor will
get all the information needed to set
up your account, and provide you
with your new cellular telephone
number. You
must use voice commands to give
the OnStar system your calling
inf ormation. To make a phone call:
Press the CALL ANSWER/CALL
END button.
Say ‘‘Yes’’ to dial the number, or
‘‘No’’ to try again. OnStar will repeat the number,
andthensay‘‘YesorNo.’’ Say the entire number without
pausing. OnStar will respond with ‘‘Phone
number to dial, please.’’ Say ‘‘Dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
OnStar will respond with ‘‘Dialing.’’
When you have f inished your
conversation, press the white
phone button again to hang up.
You will need to provide a credit card
number, and prepurchase ‘‘units’’ or
minutes of air time (one unit equals
1 minute).
Luxury and Leisure Plan
Features
Personal Concierge Services
Personal Calling
Placing a Telephone Call
OnStar
180
If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.You can also enter the number one
digit at a time. To make a phone call:
If you make a mistake speaking a
digit of the phone number, or the
system responds with the wrong
digit, say ‘‘Clear.’’ This will cause the
system to erase the last digit.
If you make a mistake speaking the
phone number, or the system
responds with the wrong number,
say ‘‘Clear.’’ This will cause the
system to erase the number.
If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.
Press the CALL ANSWER/CALL
END button.
When you have f inished your
conversation, press the CALL
ANSWER/CALL END button
again to hang up. OnStar will respond with ‘‘Dialing.’’
It will then place the telephone call. Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Dial.’’ OnStar will repeat that digit. Say the second digit of the number. OnStar will repeat that digit.
Always wait f or OnStar to conf irm
the digit bef ore going to the next
digit. Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to dial, please.’’ Say ‘‘Digit dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
CONT INUED
OnStar
Features
181
µµ
µ µµ
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not ready for it, or there was too
much background noise. Repeat the
command after a short pause.
You
cansenddialtonesduringOnStar
Personal Calling. While in a personal call, press the
Voice Activated Key-Pad Button.
OnStar will respond with ‘‘First
digit to send please.’’
Say the f irst digit of the number
you want to send.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm the digit bef ore going to the next
digit.
OnStar will repeat that digit.
Say the second digit of the number.
Continue this until you have given
OnStar the complete number.
Then say ‘‘Send.’’ OnStar will send
the number by dial tones.
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the white phone button to
answer the call. When you have
completed the call, press the white
phone button again to hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a name tag. When you want
to place a telephone call, you can
recall the number by giving the system the name tag.
To store a
telephone number and its name tag
in the system:
Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Store.’’
OnStar will respond with ‘‘Phone
number to store, please.’’
Say the entire number.
OnStar will repeat the number,
andthensay‘‘YesorNo.’’
Say ‘‘Yes,’’ or say ‘‘No’’ to try again.
OnStar will respond with ‘‘Name
tag, please.’’
Say the name that you want
assigned to that telephone number.
Voice A ctivated K ey-Pad Incoming Telephone Calls
Using Name TagsStoring a Name T ag
OnStar
182
µ
»¼
»¼
µ
»¼
»¼
»¼ To delete a
name tag and telephone number
f rom memory:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Delete.’’
OnStar will respond with ‘‘Name
tag, please.’’
Say the name tag f or the number
you want to delete.
OnStar will respond with ‘‘Deletename tag , yes or no.’’
Say ‘‘Yes.’’
OnStar will respond with ‘‘Deleting name tag .’’
To
place a telephone call using a name
tag:
You can also store a telephone
number and its name tag one digit at
a time. To store them in the system:
Press the VOICE ACTIVATED
KEYPAD button.
OnStar will respond with ‘‘Name
tag, please.’’ Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Store’’ again. Say the second digit of the number. OnStar will repeat that digit.
Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to store, please.’’ Say ‘‘Digit store.’’
OnStar will respond with ‘‘OnStar
ready.’’ Press the CALL ANSWER/CALL
END button.
If you have forgotten what name
tags you have stored, the system will
read them to you. Press the CALL
ANSWER/CALL END button. When
the system responds with ‘‘Ready,’’
say ‘‘Directory.’’ OnStar will respond with ‘‘Calling
name tag ,’’ then place the
telephone call. Say the name tag f or the number
you want to call. OnStar will respond with ‘‘Name
tag, please.’’ Say ‘‘Call.’’ OnStar will respond with ‘‘Ready.’’ Press the CALL ANSWER/CALL
END button.
Say ‘‘Yes.’’ Say ‘‘New name tag.’’
OnStar will respond with ‘‘Store new name tag , Yes or No.’’
OnStar will respond with ‘‘Storing new name tag .’’
CONT INUED
Deleting a Name tag
Placing a Telephone Call
OnStar
Features
183
µ»¼µ
To redial
the last telephone number you
called:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Redial.’’
OnStar will respond with
‘‘Redialing,’’ then place the
telephone call.
By giving the system a security code
that you make up, you can lock out
the Personal Calling and Virtual
Advisor capabilities of the system so
unauthorized people cannot make
telephone calls. To turn security on
or of f : Press the CALL ANSWER/CALL
END button.
Press the white phone button.
OnStar will respond with ‘‘OnStar
ready.’’
Say ‘‘Security.’’
OnStar will respond with ‘‘First
digit of security code, please.’’
Say the f irst digit of the code. OnStar will repeat that digit.
Say the second digit of the code.
OnStar will repeat that digit.
Say the third digit of the code.
OnStar will repeat that digit.
Say the f ourth digit of the code.
OnStar will respond with ‘‘Security
is ON/OFF.’’
If you f orget the security code
entered, or someone else enters a
security code unknown to you, you
must contact an OnStar advisor to
reset the code. Press the OnStar
button, or call (888) 4-ONSTAR.
You must prepurchase units
(minutes) of cellular air time. The
OnStar system tracks how many
units you have remaining.
To f ind out how many units you have
remaining: Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Units.’’ OnStar will respond with ‘‘Verif y
or add.’’
Say ‘‘Verif y.’’
OnStar will respond with ‘‘You
have number units remaining.’’
To purchase more
units of cellular air time: Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘OnStar
ready.’’
Say ‘‘Units.’’
OnStar will respond with ‘‘Verif y
or add.’’
Say ‘‘Add.’’
OnStar will connect you to an
automated system to handle your
purchase.
It is also possible to press the
Onstar button and talk to an
advisor to purchase more air time.
You can also call OnStar at
(888) 4-ONSTAR, or get inf ormation
about your account at the OnStar
web site, www.onstar.com.
Redialing a Number
Security Code
K eeping T rack of UnitsA dding Units
OnStar
184
Modif ying your vehicle, or installing
some non-Acura accessories, can
make your vehicle unsaf e. Bef ore
you make any modif ications or add
anyaccessories,besuretoreadthe
f ollowing inf ormation.Bef ore installing any accessory:
Make sure the accessory does not
obscure any lights, or interf ere
with proper vehicle operation or
perf ormance.
Be sure electronic accessories do
not overload electrical circuits
(see page ) or interf ere with
proper operation of your vehicle.
Do not install accessories on the
side pillars or across the rear
windows. In these areas,
accessories may interf ere with
proper operation of the side
curtain airbags.
Your dealer has Acura accessories
that allow you to personalize your
vehicle. These accessories have
been designed and approved f or your
vehicle, and are covered by warranty.
When properly installed, cellular
phones, alarms, two-way radios, and
low-powered audio systems should
not interf ere with your vehicle’s
computer controlled systems, such
as your airbags, anti-lock brakes, and
Tire Pressure Monitoring System. If possible, have your dealer
inspect the f inal installation.
Although non-Acura accessories may
f it on your vehicle, they may not
meet f actory specif ications, and
could adversely af f ect your vehicle’s
handling and stability.
Bef ore installing any electronic
accessory, have the installer
contact your dealer for assistance.
If possible, have your dealer
inspect the f inal installation.277
A ccessories and Modif ications
A ccessories
Bef ore Driving
193
Improper accessories or
modifications can affect your
vehicle’s handling, stability, and
performance, and cause a
crash in which you can be hurt
or killed.
Follow all instructions in this
owner’s manual regarding
accessories and modifications.