2005 YAMAHA YFZ450 engine coolant

EBU00150
1-CONTENTS
LOCATION OF THE WARNING
AND SPECIFICATION LABELS .............. 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records ............... 3-3
Key identification number ..................... 3-5
Vehicle identification number ............... 3-5
Model label ........................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-3
Handlebar switches .............................. 4-7
Throttle lever ...................................... 4-11
Speed limiter ...................................... 4-13
Clutch lever ........................................ 4-15
Brake lever ......................................... 4-17
Brake pedal ........................................ 4-17
Parking brake lever ............................ 4-19
Shift pedal .......................................... 4-21
Fuel tank cap ...................................... 4-21
1234
Fuel cock............................................ 4-23
Starter (choke) .................................. 4-25
Seat.................................................... 4-27
Front shock absorber adjustment ...... 4-29
Rear shock absorber adjustment ....... 4-39
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-5
Fuel ...................................................... 5-9
Engine oil ........................................... 5-13
Coolant............................................... 5-15
Chain.................................................. 5-17
Throttle lever ...................................... 5-17
Fittings and fasteners......................... 5-19
Lights ................................................. 5-19
Switches............................................. 5-19
Tires ................................................... 5-21
How to measure tire pressure ............ 5-25
Tire wear limit..................................... 5-27
5
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

OPERATION ............................................6-1
Starting a cold engine ...........................6-3
Starting a warm engine .........................6-9
Warming up...........................................6-9
Shifting ................................................6-11
To start out and accelerate .................6-13
To decelerate ......................................6-17
Engine break-in ...................................6-19
Parking ................................................6-23
Parking on a slope ..............................6-25
Accessories and loading .....................6-29
RIDING YOUR ATV..................................7-1
Getting to know your ATV .....................7-3
Ride with care and good judgement .....7-5
Be careful where you ride ...................7-27
Turning your ATV ................................7-41
Climbing uphill.....................................7-47
Riding downhill ....................................7-57
Crossing a slope .................................7-61
Crossing through shallow water ..........7-65
Riding over rough terrain ....................7-69
Sliding and skidding ............................7-71
What to do if ........................................7-75
What to do...........................................7-75
67
PERIODIC MAINTENANCE AND
ADJUSTMENT ......................................... 8-1
Owner’s manual and tool kit ................. 8-3
Periodic maintenance/lubrication.......... 8-7
Panel removal and installation............ 8-17
Engine oil and oil filter element........... 8-23
Cooling system ................................... 8-41
Changing the coolant.......................... 8-45
Spark plug inspection ......................... 8-53
Air filter element cleaning ................... 8-65
Carburetor adjustment ........................ 8-73
Idle speed adjustment ........................ 8-75
Valve clearance adjustment ............... 8-75
Throttle lever adjustment .................... 8-77
Front brake pad inspection ................. 8-79
Rear brake pad inspection.................. 8-81
Brake fluid level inspection ................. 8-83
Brake fluid replacement ...................... 8-87
Front brake lever free play.................. 8-89
Brake pedal height adjustment ........... 8-91
Parking brake adjustment ................... 8-93
Adjusting the rear brake light switch ... 8-97
Clutch lever free play adjustment ....... 8-99
Drive chain slack check .................... 8-101
Drive chain slack adjustment ............ 8-103
Lubricating the drive chain................ 8-107
Cable inspection and lubrication....... 8-111
8
U5TG61.book Page 2 Friday, April 2, 2004 11:28 AM

3-1
EBU00320
1-DESCRIPTION AND MACHINE
IDENTIFICATION1. Seat
2. Fuel tank cap
3. Radiator cap
4. Oil filter element
5. Brake pedal
6. Headlights
7. Fuel cock
8. Starter (choke)
9. Throttle stop screw
10. Fuse11. Tail/brake light
12. Coolant reservoir
13. Shift pedal
14. Engine oil tank
15. Clutch lever
16. Handlebar switches
17. Parking brake lever
18. Main switch
19. Throttle lever
20. Brake leverNOTE:_ The machine you have purchased may differ
slightly from those shown in the figures of this
manual. _
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

4-3 1. Neutral indicator light “N”
2. Coolant temperature warning light “”
1. Témoin de point mort “N”
2. Témoin d’avertissement de la température du liquide de
refroidissement “”
1. Luz de control de punto muerto “N”
2. Luz de aviso de la temperatura del refrigerante “”
EBU08020
Indicator and warning lights
EBU06030
Neutral indicator light “N”
This indicator light comes on when the transmis-
sion is in neutral.
EBU13850
Coolant temperature warning light “”
When the coolant temperature reaches a specified
level, this light comes on to warn that the coolant
temperature is too hot. If the light comes on during
operation, stop the engine as soon as it is safe to
do so and allow the engine to cool down for about
10 minutes.
The electrical circuit of the warning light can be
checked according to the following procedures.
1. Set the engine stop switch to “RUN” and turn
the key to “ON”.
2. Shift the transmission into the neutral position
or pull the clutch lever.
U5TG61.book Page 3 Friday, April 2, 2004 11:28 AM

5-1
EBU01130
1-PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brakeCheck operation, lever free play, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7, 8-79,
8-83–8-89
Rear brakeCheck operation, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7,
8-81–8-87, 8-91
ClutchCheck operation, condition and lever free play. 8-99
Parking brakeCheck operation, condition and cable length. 8-93–8-95
FuelCheck fuel level.
Fill with fuel if necessary.5-9–5-11
Engine oilCheck oil level.
Fill with oil if necessary.5-13, 8-23–8-39
Coolant reservoirCheck coolant level in reservoir.
Fill with coolant if necessary.5-15–5-17,
8-41–8-51
Drive chainCheck chain slack and condition.
Adjust if necessary.5-17, 8-101–8-109
ThrottleCheck for proper throttle cable operation and free play. 5-17, 8-77
Wheels and tiresCheck tire pressure, wear and damage.5-21–5-27,
8-121–8-123
Fittings and fastenersCheck all fittings and fasteners. 5-19
Lights and switchesCheck for proper operation.5-19, 8-97,
8-133–8-141
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

5-15
EBU13160
Coolant
Check the coolant level in the coolant reservoir
when the engine is cold. (The coolant level will
vary with engine temperature.) The coolant level is
satisfactory if it is between the minimum and max-
imum level marks on the coolant reservoir. If the
coolant level is at or below the minimum level
mark, add distilled water to bring the level up to the
maximum level mark. Change the coolant every
two years. (See pages 8-41–8-51 for details.)CAUTION:_ Hard water or salt water is harmful to the en-
gine. You may use soft water if you cannot get
distilled water. _
Coolant reservoir capacity
(up to the maximum level mark):
0.29 L
U5TG61.book Page 15 Friday, April 2, 2004 11:28 AM

8-7
EBU02621
PERIODIC MAINTENANCE/LUBRICATION
NOTE:_

For ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.


For ATVs equipped with an odometer or an hour meter, follow the km (mi) or hours maintenance in-
tervals. However, keep in mind that if the ATV isn’t used for a long period of time, the month mainte-
nance intervals should be followed.
_
ITEM ROUTINEWhichever
comes firstINITIAL EVERY
month136612
km
(mi)320
(200)1,200
(750)2,400
(1,500)2,400
(1,500)4,800
(3,000)
hours 20 75 150 150 300
Valves*Check valve clearance.
Adjust if necessary.
Cooling systemCheck for coolant leakage.
Repair if necessary.
Replace coolant every 24 months.Spark plugCheck condition.
Adjust gap and clean.
Replace if necessary.Air filter elementClean.
Replace if necessary.Every 20–40 hours
(More often in wet or dusty areas.)
Carburetor*Check starter (choke) operation.
Adjust engine idling speed.Crankcase breather
system*Check breather hose for cracks or damage.
Replace if necessary.Exhaust system*Check for leakage.
Tighten if necessary.
Replace gasket if necessary.Fuel line*Check fuel hose for cracks or damage.
Replace if necessary.Engine oil
Replace (Warm engine before draining).U5TG61.book Page 7 Friday, April 2, 2004 11:28 AM

8-41 1. Maximum level mark 2. Minimum level mark
3. Coolant reservoir 4. Coolant reservoir cap
1. Repère de niveau maximum 2. Repère de niveau minimum
3. Vase d’expansion 4. Bouchon du vase d’expansion
1. Marca de nivel máximo 2. Marca de nivel mínimo
3. Depósito de refrigerante
4. Tapa del depósito de líquido refrigerante
EBU10151
Cooling system
1. Check the coolant level in the coolant reser-
voir when the engine is cold as the coolant
level will vary with engine temperature.NOTE:_ The coolant should be between the minimum and
maximum level marks. _2. If the coolant is at or below the minimum level
mark, remove the coolant reservoir cap, and
then add coolant or distilled water to raise it to
the specified level.CAUTION:_ Hard water or salt water is harmful to the en-
gine. You may use soft water if you can’t get
distilled water. _
Coolant reservoir capacity
(up to the maximum level mark):
0.29 L
U5TG61.book Page 41 Friday, April 2, 2004 11:28 AM