Page 364 of 452
8-97 1. Rear brake light switch 2. Adjusting nut
1. Contacteur de feu stop sur frein arrière
2.Écrou de réglage
1. Interruptor de la luz de freno trasero
2. Tuerca de ajuste
EBU08330
Adjusting the rear brake light switch
The rear brake light switch, which is activated by
the brake pedal and brake lever, is properly adjust-
ed when the brake light comes on just before brak-
ing takes effect. If necessary, adjust the brake light
switch as follows.
Turn the adjusting nut while holding the rear brake
light switch in place. To make the brake light come
on earlier, turn the adjusting nut in direction
a. To
make the brake light come on later, turn the adjust-
ing nut in direction
b.
U5TG61.book Page 97 Friday, April 2, 2004 11:28 AM
Page 408 of 452
8-141 1. Lens 2. Screw (× 2)
1. Lentille 2. Vis (× 2)
1. Lente 2. Tornillo (× 2)
1. Bulb
1. Ampoule
1. Bombilla
EBU12170
Tail/brake light bulb replacement
1. Remove the lens by removing the screws.
2. Remove the defective bulb by pushing it in-
ward and turning it counterclockwise.
3. Install a new bulb by pushing it inward and
turning it clockwise.
4. Install the lens by installing the screws.CAUTION:_ Do not overtighten the screws as the lens may
break. _
U5TG61.book Page 141 Friday, April 2, 2004 11:28 AM
Page 434 of 452
10-5
Wheel travel:
Front
Rear230.0 mm
256.0 mm
Electrical:
Ignition system
Generator system
Battery type/voltage capacityDC-C.D.I.
A.C. magneto
GT7B-4/12 V, 6.5 Ah
Headlight type: Krypton bulb
Bulb voltage, wattage
× quantity:
Headlight
Tail/brake light
Indicator/warning lights:
Neutral
Coolant temperature12 V, 30 W/30.0 W
× 2
12 V, 5 W/21.0 W
× 1
12 V, 1.7 W
× 1
12 V, 1.7 W
× 1
Fuse: 15.0 AMODEL YFZ450
U5TG61.book Page 5 Friday, April 2, 2004 11:28 AM