5 - 115
CHASSTEERING
7. Install:
Front fork
1
Upper bracket
2
Main switch
3
Coupler bracket
4
Front brake hose guide
bracket
5
NOTE:Install the coupler bracket on the
outside of the front brake hose
guide bracket.
Temporarily tighten the pinch bolts
(lower bracket).
Do not tighten the pinch bolts
(upper bracket) yet.
8. Install:
Washer
1
Steering stem nut
2
T R..145 Nm (14.5 m · kg, 105 ft · lb)
9. Install:
Steering stem cap
1
10. After tightening the nut, check
the steering for smooth move-
ment. If not, adjust the steering
by loosening the steering ring
nut little by little.
11. Adjust:
Front fork top end
a
Front fork top end
(standard) a
:
5 mm (0.20 in)
7. Monter:
Fourche 1
Té supérieur 2
Contacteur à clé 3
Support de fiche rapide 4
Support du guide de durit de frein
avant 5
N.B.:
Monter le support de fiche rapide à
l’extérieur du support du guide de
durit de frein avant.
Serrer provisoirement les boulons de
pincement (té inférieur).
Ne pas encore serrer les boulons de
pincement (té supérieur).
8. Monter:
Rondelle 1
Ecrou de la colonne de direction
2
T R..145 Nm (14,5 m · kg, 105 ft · lb)
9. Monter:
Capuchon de la colonne de direc-
tion 1
10. Après avoir serré l’écrou, vérifier si
le mouvement de la direction est
régulier. Sinon, régler la direction
en desserrant petit à petit l’écrou.
11. Régler:
Extrémité supérieure de la four-
che a
Sommet de bras de fourche
(standard) a:
5 mm (0,20 in)
DIRECTION
5 - 119
CHASSWINGARM
EC570000
SWINGARM
Extent of removal:
1 Swingarm removal
Extent of removal Order Part name Q’ty Remarks
SWINGARM REMOVAL
WARNING
Support the machine securely so there is nodanger of it falling over. Preparation for removal Hold the machine by placing the suitable
stand under the engine.
Brake hose holder
Refer to “FRONT BRAKE AND REAR BRAKE”
section.
Rear brake caliper
Bolt (brake pedal) Shift the brake pedal backward.
Drive chain
1 Drive chain support 1
2 Lower chain tensioner 1
3 Bolt (rear shock absorber-relay arm) 1 Hold the swingarm.
4 Bolt (connecting rod) 1
5 Pivot shaft 1
6 Swingarm 1
1