2005 YAMAHA MAJESTY 125 clock

SAFETY INFORMATION.....................1-1
DESCRIPTION.....................................2-1
Left view ...........................................2-1
Right view .........................................2-2
Controls and Instruments .................2-3
INSTRUMENT AND CONTROL
FUNCTION..........................................3-1
Main switch.......................................3-1
Indicator lights ..................................3-1
Speedometer unit .............................3-3
Battery voltage/fuel gauge ...............3-3
Clock .................................................3-4
Handlebar switches ..........................3-4
Front brake lever...............................3-5
Rear brake lever................................3-6
Fuel tank cap ....................................3-6
Fuel ...................................................3-6
Seat...................................................3-7
Front storage compartment..............3-7
Storage compartment.......................3-7
Adjusting the rear shock absorber
assemblies.....................................3-8
Sidestand ..........................................3-8
Sidestand switch operation check ...3-9
PRE-OPERATION CHECKS...............4-1
Pre-operation check list....................4-2OPERATION AND IMPORTANT RIDING
POINTS................................................5-1
Starting a cold engine ......................5-1
Starting off ........................................5-2
Acceleration and deceleration ..........5-2
Braking..............................................5-2
Parking ..............................................5-3
PERIODIC MAINTENANCE AND
MINOR REPAIRS................................6-1
Owner’s tool kit .................................6-1
Periodic maintenance and
lubrication chart ............................6-2
Removing and installing cowlings
and panels .....................................6-5
Checking the spark plug ..................6-6
Engine oil ..........................................6-7
Final gear oil .....................................6-9
Coolant ...........................................6-10
Air filter and V-belt case air filter
elements ......................................6-11
Adjusting the carburetor .................6-12
Checking the throttle cable free
play ..............................................6-12
Tires ................................................6-13
Adjusting the brake lever free
play ..............................................6-15
Checking the front and rear brake
pads.............................................6-15
Checking the brake fluid level ........6-15
Changing the brake fluid ................6-16Checking and lubricating the
cables ..........................................6-16
Checking and lubricating the
centerstand and sidestand .........6-17
Checking the front fork ...................6-17
Checking the steering.....................6-17
Checking the wheel bearings .........6-18
Battery ............................................6-18
Replacing the fuse ..........................6-20
Replacing the headlight bulb or
a front turn signal light bulb ........6-20
Replacing a front turn signal light
bulb .............................................6-21
Replacing the license plate light
bulb .............................................6-21
Replacing the tail/brake light bulb
or a rear turn signal light bulb .....6-22
Troubleshooting ..............................6-23
Troubleshooting chart .....................6-24
SCOOTER CARE AND STORAGE.....7-1
Care ..................................................7-1
Storage .............................................7-3
SPECIFICATIONS...............................8-1
CONSUMER INFORMATION.............9-1
Identification numbers ......................9-1
TABLE OF CONTENTS
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 6

EAU10430
Controls and instruments
DESCRIPTION
2-3
224
21
17
23
22
2619201827
182516
15
28
15. Rear brake lever (page 3-6)
16. Left handlebar switch (page 3-4)
17. Speedometer (page 3-3)
18. Turn indicator lights (page 3-1)
19. High beam indicator light (page 3-1)
20. Coolant temperature warning light (page 3-1)
21. Fuel gauge (page 3-3)22. Front brake lever (page 3-5)
23. Right handlebar switch (page 3-4)
24. Battery voltage (page 3-3)
25. Odometer/Clock (page 3-4)
26. Main switch/Steering lock (page 3-1)
27. Front compartment (page 3-7)
28. Coolant level gauge window (page 6-10)
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 14

EAU11660
Speedometer unit
1. Speedomenter unit
2. Odometer
The speedometer unit is equipped
with a speedometer, an odometer and
a tripmeter. The speedometer shows
riding speed. The odometer shows
the total distance traveled. The trip-
meter shows the distance traveled
since it was last set to zero.
Pushing the “TRIP” button switches
the display between the odometer
mode “ODO” and the tripmeter mode
“TRIP”. To reset the tripmeter, enter
the “TRIP” mode, and then hold down
the “TRIP” button for at least one
second. The tripmeter can be used
together with the fuel gauge to esti-mate the distance that can be trave-
led with a full tank of fuel. This infor-
mation will enable you to plan future
fuel stops.
Setting the odometer/tripmeter
reading mode
The odometer and tripmeter can be
set to count in either miles or kilome-
ters according to the following proce-
dure.
1. Turn the key to “ON” while pres-
sing the reset button.
2. Release the reset button when
the display comes on.
3. The current mode appears in the
display: “CONT” (continental) for
the kilometer mode and “EnGL”
(English) for the mile mode.
4. Press the reset button to switch
the mode.
5. Press the reset button for two
seconds to confirm the setting.
NOTE:
The odometer/tripmeter reading
mode can be changed any num-
ber of times while the odometer
reading is below 10, but it cannot
be changed anymore after the
reading has reached 10.
Switching between the mile and
the kilometer mode does not
change or convert the current
odometer/tripmeter reading.
EAUM1100
Battery voltage/fuel gauge
1. Fuel gauge
2. Clock
21
2
1
3
INSTRUMENT AND CONTROL FUNCTIONS
3-3
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 17

When the key is turned to “OFF”, the
voltage/fuel gauge indicates the bat-
tery voltage.
NOTE:
If the battery voltage drops to 10 V,
have a Yamaha dealer check the bat-
tery.
When the key is turned to “ON”, the
voltage/fuel gauge indicates the
amount of fuel in the fuel tank after
indicating the battery voltage for two
seconds. The needle moves towards
“E” (empty) as the fuel level decrea-
ses. When the needle reaches “E”,
refuel as soon as possible.
NOTE:
Do not allow the fuel tank to empty
itself completely.
EAU12330
Anti-theft alarm (optional)
This motorcycle can be equipped
with an optional anti-theft alarm by a
Yamaha dealer. Contact a Yamaha
dealer for more information.
EAUS1210
Clock
To set the clock
1. Turn the key to “ON”.
2. Press the “TRIP” button for two
seconds, and the hour display
will flash.
3. Press the “TRIP” button to set
the hours.
4. Press the “TRIP” button for two
seconds, and the first minute
digit will flash.
5. Press the “TRIP” button to set
the first minute digit.
6. Press the “TRIP” button for two
more seconds, and the second
minute digit will flash.
7. Press the “TRIP” button to set
the second minute digit.
8. Press the “TRIP” button for two
seconds to set the clock.
EAU12343
Handlebar switches
1. Dimmer switch “j, k”
2. Turn signal switch “b”
3. Horn switch“a”
EAUS1020
Dimmer switch “j/k”
Set this switch to “
j” for the high
beam and to “
k” for the low beam.
With the headlight on low beam,
press this switch downwards to flash
the headlight.
1
32
3
INSTRUMENT AND CONTROL FUNCTIONS
3-4
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 18

EAU12950
Rear brake lever
1. Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the hand-
lebar grip.
EAUS1040
Fuel tank cap
1. Aligning marks
2. Fuel tank cover
3. Fuel tank cap
To open the fuel tank cap
1. Open the fuel tank cap cover by
pushing in on the rear end of it.
2. Insert the key in the lock and turn
it clockwise.
To close the fuel tank cap
1. Align the match marks, and then
push the fuel tank cap into the
original position.
2. Turn the key counterclockwise
and remove it.
3. Close the fuel tank cover.
EAU13220
Fuel
1. Filling tube
2. Fuel level
Make sure that there is sufficient fuel
in the tank. When refueling, be sure to
insert the pump nozzle into the fuel
tank filler hole and to fill the tank to
the bottom of the filler tube as shown.
EWA10880
s s
WARNING
Do not overfill the fuel tank,
otherwise it may overflow
when the fuel warms up and
expands.
Avoid spilling fuel on the hot
engine.
1
1
23
3
INSTRUMENT AND CONTROL FUNCTIONS
3-6
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 20

ECA10070
CAUTION
Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfa-
ces or plastic parts.
EAU13890
Seat
To open the seat
1. Insert the key in the lock, and
then turn it as shown.
2. Fold the seat up.
To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key.
NOTE:
Make sure that the seat is properly
secured before riding.
EAU14400
Front storage compartment
1. Lock
2. Glove compartment
EWA11190
s s
WARNING
Do not exceed the load limit of
10 kg (22,05 lb) for the front
storage compartment.
Do not exceed the maximum
load of 324 kg (714,42 lb) for
the vehicle.
EAU14540
Storage compartment
To open the storage compartment
Insert the key into the lock, turn it
clockwise, and then pull on it to open
the storage compartment lid.
To close the storage compartment
Push the storage compartment lid
into the original position, and then
remove the key.
1
2
3
INSTRUMENT AND CONTROL FUNCTIONS
3-7
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 21

4. Install the panel by installing the
screws.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
Front turn signal light bulb
1. Remove the front panel by remo-
ving the screws.
2. Remove the defective bulb from
the socket.
3. Insert a new bulb into the socket.
4. Install the panel by installing the
screws.
EAU24250
Replacing a front turn signal
light bulb
1. Lens front turn signal
2. Light bulb
1. Remove the front turn signal light
lens by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
ECA11190
CAUTION
Do not overtighten the screw,
otherwise the lens may break.
EAU24310
Replacing the license plate
light bulb
1. License plate light
1. Remove the license plate light
unit by removing the screws.
2. Remove the socket (together
with the bulb) by pulling it out.
3. Remove the defective bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit
by installing the screws.
1
1
2
6
PERIODIC MAINTENANCE AND MINOR REPAIR
6-21
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 50

EAUS1130
Replacing the tail/brake light
bulb or a rear turn signal
light bulb
1. Screw (x2)
Tail/brake light bulb
1. Remove the tail/brake light bulb
lens by removing the screws.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.Rear turn signal light bulb
1. Remove the tail/brake light lens
by removing the screws.
2. Remove the left or right turn sig-
nal light bulb lens by pulling it
backwards.
3. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the turn signal light bulb
lens.
6. Install the tail/brake light bulb
lens by installing the screws.ECA10680
CAUTION
Do not overtighten the screws,
otherwise the lens may break.
11
6
PERIODIC MAINTENANCE AND MINOR REPAIR
6-22
5XL-F8199-E3.qxd 19/09/2005 16:26 Página 51