2005 YAMAHA BLASTER 200 check oil

[x] Cancel search: check oil

Page 14 of 388

YAMAHA BLASTER 200 2005  Owners Manual LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3

Page 68 of 388

YAMAHA BLASTER 200 2005  Owners Manual 4-3
EBU00043
Indicator lights
EBU01274
Oil level warning light “7”
This light comes on when the oil level is low.
The light circuit can be checked by the following
procedure.
cC
Always make sure t

Page 70 of 388

YAMAHA BLASTER 200 2005  Owners Manual 4-5
EBU00757
Oil level warning light checking method
Start the engine.
Wait a few seconds.
Engine oil level and 
electrical circuit are OK.Supply engine oil.
Oil level warning light
does not come on
(

Page 102 of 388

YAMAHA BLASTER 200 2005  Owners Manual 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5–5-7
9Fill with DOT 4

Page 256 of 388

YAMAHA BLASTER 200 2005  Owners Manual 8-7INITIAL EVERY
month 1 3 6 6 12
ITEM ROUTINEWhichever
km 320 1200 2400 2400 4800 comes first
(mi) (200) (750) (1500) (1500) (3000)
hours 20 75 150 150 300
Transmission9Replace oil.2 222
9Check condi

Page 258 of 388

YAMAHA BLASTER 200 2005  Owners Manual 8-9
NOTE:
8Recommended brake fluid: DOT 4
8Brake fluid replacement:
9When disassembling the master cylinders or caliper cylinders, replace the brake fluid.
Normally check the brake fluid level and add

Page 266 of 388

YAMAHA BLASTER 200 2005  Owners Manual EBU08371
Transmission oil
Transmission oil measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Check the oil level through the level window

Page 272 of 388

YAMAHA BLASTER 200 2005  Owners Manual 8-23
7. Start the engine and warm it up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately, and check for the
cause.
8. Check the oil leve
Page:   1-8 9-16 next >