2005 TOYOTA TUNDRA light

’05 TUNDRA_U (L/O 0408)
459
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Light bulbsBulb
No.WTy p e
Vanity light—1.5E
Door courtesy
lights1943.4D
Glove box light—1.2D
Step light—1.4D
A: HB2 halogen bulbs
B: HB4 halogen bulbs
C: Wedge base bulbs (amber)
D: Wedge base bulbs (clear)
E: Double end bulbs
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.2. Release the bulb retaining spring and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
—Headlights

’05 TUNDRA_U (L/O 0408)
460
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
3. Install the rubber cover as shown,
and fit it securely on the boss. Then
plug in the connector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer. If either the left or right front fog lights
burns out, contact your Toyota dealer.
NOTICE
Do not try to replace the front fog
light bulbs by yourself. You may dam-
age the vehicle.
LEFT SIDE PARKING LIGHT—Loosen the
bolt and remove the engine coolant reser-
voir.
—Front fog lights
—Parking lights

’05 TUNDRA_U (L/O 0408)
461
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Use a Phillips −head screwdriver. Remove
and install the clip as shown in the fol-
lowing illustrations.Removing clip
Installing clip
—Front turn signal/front side
marker lights (standard and
access cab models)

’05 TUNDRA_U (L/O 0408)
462
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Use a Phillips −head screwdriver. Remove
and install the clip as shown in the fol-
lowing illustrations.Removing clip
Installing clip
—Front side marker/front turn
signal lights
(double cab models)

’05 TUNDRA_U (L/O 0408)
463
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Remove the bolts.a: Back −up light
b: Rear turn signal light
c: Stop/tail/rear side marker light
—Rear turn signal,
stop/tail/rear side marker and
back− up lights (type A)

’05 TUNDRA_U (L/O 0408)
464
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Remove the bolts.
—Rear turn signal,
stop/tail/rear side marker and
back−up lights (type B)

’05 TUNDRA_U (L/O 0408)
465
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
a: Rear turn signal light
b: Stop/tail/rear side marker light
c: Back −up lightRemove the bolts.a: Back −up light
b: Rear turn signal light
c: Stop/tail/rear side marker light
Remove the bulb of the back −up light at
first when removing that of the rear turn
signal light.
—Rear turn signal,
stop/tail/rear side marker and
back− up lights (type C)

’05 TUNDRA_U (L/O 0408)
466
2005 TUNDRA from Aug. ’04 Prod. (OM34427U)
Use a Phillips −head screwdriver.Use a Phillips −head screwdriver.
a: High mounted stoplight
b: Cargo lamps
—License plate lights —High mounted stoplight and
cargo lamps