2005 TOYOTA TACOMA remove seats

1112005 TACOMA from Mar. ’05 Prod. (OM35862U)
LS13052b
Anchor
brackets
Symbol
mark
Routing device
Bench seat
LS13053bAnchor
bracket
Symbol
mark
Routing
device
Separate seats
Use the routing device and the anchor
bracket on the back panel to attach the
top strap.
Anchor brackets are installed for (each)
passenger seating position.
This symbol indicates the location of the
anchor bracket.
LS13063
TO USE THE ANCHOR BRACKET: 1. Remove the passenger head re- straint.

3062005 TACOMA from Mar. ’05 Prod. (OM35862U)
Make sure to set the jack prop-
erly in the jack point. Raising
the vehicle with jack improper-
ly positioned will damage the
vehicle or may allow the ve-
hicle to fall off the jack and
cause personal injury.
 Never get under the vehicle
when the vehicle is supported
by the jack alone.
 Use the jack only for lifting
your vehicle during wheel
changing.
 Do not raise the vehicle with
someone in the vehicle.
 When raising the vehicle, do
not place any objects on top
of or underneath the jack.
 Raise the vehicle only high
enough to remove and change
the tire.NOTICE
Do not continue driving with a
deflated tire. Driving even a
short distance can damage a
tire and wheel beyond repair.
LS40003
Regular cab models (behind the
seatback)
LS40006a
Front
Access cab models ( under the
rear seats)
—Required tools and spare tire

3072005 TACOMA from Mar. ’05 Prod. (OM35862U)
LS40007a
Front
Double cab models (under the
rear seats)
1. Get the required tools andspare tire.
1Jack
2 Tool bag
To prepare yourself for an emergency,
you should familiarize yourself with
the use of the jack, each of the tools
and their storage locations.
When storing the tool bag, make sure
it is securely by the tightening strap.
LS40036
Turn the jack joint by hand.
To rem ov e: Tur n the joint in direction
1 until the jack is free.
To store: Turn the joint in direction 2
until the jack is fi rmly secured to pre-
vent it flying forward during a collision
or sudden braking.
LS40005a
To remove the spare tire:
1. Put a jack handle, jack handle ex- tension and jack handle end to-
gether as shown in the illustration.
1 Jack handle end
2 Jack handle extension
3 Wheel nut wrench
CAUTION
Make sure they are each securely
fixed with the screws.