2005 TOYOTA SOLARA instrument panel

’05 Solara_U (L/O 0409)
193
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
“AUTO” button
For automatic operation of the air condi-
tioning, press the “AUTO” button. “AUTO”
will appear on the display to show that
the automatic operation mode has been
selected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed, air flow, air intake and on−off of
the air conditioning according to the tem-
perature.
When you press the “AUTO” button with
the air intake mode at FRESH, internal
circulation may be applied for maximum
cooling.
You may use manual controls if you want
to select your own settings.
Fan speed selector
Push the “ ” (increase) or “ ” (decrease)
side of the button to adjust the fan speed.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode. Temperature selector
To increase the temperature, press the
“
 ” side, to decrease it, press the “ ”
side.
“MAX. COLD” appears when you adjust to
maximum cooling, and “MAX. HOT” when
you adjust to maximum warming.
The temperature display changes between
“  C” and “ F” when the unit of the multi −
information display is changed. (For de-
tails, see “Multi −information displays” on
page 204 in Section 1 −10.)
“OFF” button
Push the button to turn off the air condi-
tioning system.
“MODE” button (air flow selector)
Push the “MODE” button to select the
vents used for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode. 1. Panel— Air flows mainly from the
instrument panel vents.
2. Bilevel— Air flows from both the floor
vents and the instrument panel vents.
3. Floor— Air flows mainly from the floor
vents.
4. Floor/Windshield— Air flows mainly
from the floor vents and windshield
vents.

’05 Solara_U (L/O 0409)
215
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
CAUTION
When programming the HomeLink
Universal Transceiver, you may be
operating a garage door or other
device. Make sure people and ob-
jects are out of the way of the ga-
rage door or other device to pre-
vent potential harm or damage.
Do not use this HomeLink Univer-
sal Transceiver with any garage
door opener that lacks the safety
stop and reverse feature as re-
quired by federal safety standards.
(This includes any garage door
opener model manufactured before
April 1, 1982.) A garage door open-
er which cannot detect an object
(signaling the door to stop and re-
verse), does not meet current feder-
al safety standards. Using a garage
door opener without these features
increases risk of serious injury or
death.
This device complies with Part 15 of the
FCC Rules and with RSS −210 of the IC
Rules. Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
WARNING: This transmitter has been
tested and complies with FCC and IC
rules. Changes or modifications not
expressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
device.
To use the glove box, do this.
To open: Pull the lever.
With the instrument panel lights on, the
glove box light will come on when the
glove box is open.
To lock: Insert the master key and turn it
clockwise.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.
Glove box

’05 Solara_U (L/O 0409)
232
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
For an explanation of this system’s warn-
ing light, see “Service reminder indicators
and warning buzzers” on page 129 in Sec-
tion 1−6.
The brake pad wear limit indicators on
your disc brakes give a warning noise
when the brake pads are worn to where
replacement is required.
If you hear a squealing or scraping noise
while driving, have the brake pads
checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-
tor damage can result if the pads are not
replaced when necessary.The vehicle identification number (VIN)
is the legal identifier for your vehicle.
This number is on the left top of the
instrument panel, and can be seen
through the windshield from outside.
This is the primary identification number
for your Toyota. It is used in registering
the ownership of your vehicle.
Brake pad wear limit
indicators Your Toyota’s identification—
—Vehicle identification
number

’05 Solara_U (L/O 0409)
246
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
Never allow anyone to ride in
the enlarged trunk. It is not de-
signed for passengers. They
should ride in their seats with
their seat belts properly fas-
tened. Otherwise, they are
much more likely to suffer seri-
ous bodily injury, in the event
of sudden braking or a colli-
sion.
 Do not place anything on the
package tray behind the rear
seatback. Such items may be
thrown about and possibly in-
jure people in the vehicle dur-
ing sudden braking or an acci-
dent.
 Do not drive with objects left
on top of the instrument panel.
They may interfere with the
driver’s field of view. Or they
may move during sharp vehicle
acceleration or turning, and im-
pair the driver’s control of the
vehicle. In an accident they
may injure the vehicle occu-
pants.Cargo capacity depends on the to-
tal weight of the occupants.
(Cargo capacity) = (Total load capac-
ity) – (Total weight of occupants)
STEPS FOR DETERMINING
CORRECT LOAD LIMIT
1. Locate the statement “The com- bined weight of occupants and
cargo should never exceed XXX
pounds” on your vehicle’s placard.
2. Determine the combined weight of the driver and passengers that will
be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from
XXX kilograms or XXX pounds. 4. The resulting figure equals the
available amount of cargo and lug-
gage load capacity. For example,
if the “XXX” am ount equals 1400
lbs. and there will be five 150 lb.
passengers in your vehicle, the
amount of available cargo and lug-
gage load capacity is 650 lbs.
(1400–750 (5x150)=650 lbs).
5. Determine the combined weight of luggage and cargo being loaded
on the vehicle. That weight may
not safely exceed the available
cargo and luggage load capacity
calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your trailer will
be transferred to your vehicle.
Consult this manual to determine
how this reduces the available car-
go and luggage load capacity of
your vehicle.
Toyota does not recommend towing
a trailer with your vehicle. Your ve-
hicle is not designed for trailer towing.
—Capacity and distribution

’05 Solara_U (L/O 0409)
285
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
First vacuum over the upholstery to re-
move loose dirt. Then, using a sponge or
soft cloth, apply the soap solution to the
vinyl. After allowing it to soak in for a few
minutes to loosen the dirt, remove the dirt
and wipe off the soap with a clean damp
cloth. If all the dirt do not come off, re-
peat the procedure. Commercial foaming−
type vinyl cleaners are also available
which work well. Follow the manufacturer ’s
instructions.
NOTICE
Do not use solvent, thinner, gasoline
or window cleaner on the interior.
Carpets
Use a good foamtype shampoo to
clean the carpets.
Begin by vacuuming thoroughly to remove
as much dirt as possible. Several types of
foam cleaners are available; some are in
aerosol cans and others are powders or
liquids which you mix with water to pro-
duce a foam. To shampoo the carpets,
use a sponge or brush to apply the foam.
Rub in overlapping circles. Do not apply water—the best results are
obtained by keeping the carpet as dry as
possible. Read the shampoo instructions
and follow them closely.
Seat belts
The seat belts may be cleaned with
mild soap and water or with lukewarm
water.
Use a cloth or sponge. As you are clean-
ing, check the belts for excessive wear,
fraying, or cuts.
NOTICE

Do not use dye or bleach on the
belts—it may weaken them.
 Do not use the belts until they be-
come dry.
Windows
The windows may be cleaned with any
household window cleaner.
NOTICE
When cleaning the inside of the rear
window, be careful not to scratch or
damage the heater wires or connec-
tors.
Air conditioning control panel, audio
panel, instrument panel, console panel
and switches
Use a soft damp cloth for cleaning.
Soak a clean soft cloth in water or luke-
warm water then lightly wipe off dirt.
NOTICE
Do not use organic substances (sol-
vents, kerosene, alcohol, gasoline,
etc.) or alkaline or acidic solutions.
These chemicals can cause discol-
oring, staining or peeling of the
surface.
 If you use cleaners or polishing
agents, make sure their ingredients
do not include the substances men-
tioned above.
 If you use a liquid car freshener, do
not spill the liquid onto the ve-
hicle’s interior surfaces. It may con-
tain the ingredients mentioned
above. Immediately clean any spill
using the method mentioned above.

’05 Solara_U (L/O 0409)
333
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
Instrument panel
Fuses (type A)1. HEAD LH LWR 15 A: Left−hand head-
light (low beam)
2. HEAD RH LWR 15 A: Right−hand
headlight (low beam)
3. DRL 5 A: Daytime running light system
4. A/C 10 A: Air conditioning system
5. SPARE 10 A: Spare fuse
6. SPARE 15 A: Spare fuse
7. SPARE 5 A: Spare fuse
8. AM2 30 A: Starting system, “IGN” and
“IG2” fuses 9. HEAD LH UPR 10 A:
Left−hand head-
light (high beam)
10. HEAD RH UPR 10 A: Right−hand
headlight (high beam)
11. ALTS 5 A: Charging system
12. IGN 15 A: Ignition system, multi −infor-
mation display
13. IG2 10 A: Multiport fuel injection sys-
tem/sequential multiport fuel injection
system, SRS airbag system, cruise
control system, gauges and meters,
front passenger occupant classification
system
14. DOOR1 25 A: Multiplex communication
system (power door lock system, auto −
door locking system, wireless remote
control system)
15. EFI 20 A: Multiport fuel injection sys-
tem/sequential multiport fuel injection
system, emission control system
16. HORN 10 A: Horns
17. D.C.C 30 A: “ECU−B”, “RAD1” and
“DOME” fuses
18. A/F 25 A: Multiport fuel injection sys-
tem/sequential multiport fuel injection
system 19. ABS No.2 25 A:
Anti−lock brake sys-
tem, vehicle stability control system,
traction control system, brake assist
system
20. ETCS 10 A: Multiport fuel injection
system/s equential multiport fuel injec-
tion system
21. HAZ 15 A: Emergency flashers
Fuses (type B)
22. P/W No.2 7.5 A (convertible): Side power windows
23. FOG 10 A: Front fog lights
24. OBD 7.5 A: On−board diagnosis sys-
tem
25. AMP 25 A: Audio system
26. STOP 15 A: Stop lights, high mounted
stoplight, anti −lock brake system, shift
lock control system, vehicle stability
control system, multiport fuel injection
system/s equential multiport fuel injec-
tion system
2

7. AM1 7.5 A: Starting system
28. P/W 25 A: Power windows
29. S/ROOF 25 A: Electric moon roof
30. TAIL 10 A: Tail lights, parking lights,
license plate lights, front fog lights,
multiport fuel injection system/sequen-
tial multiport fuel injection system

’05 Solara_U (L/O 0409)
334
2005 SOLARA from Sep. ’04 Prod. (OM33690U)
31. PANEL 10 A: Glove box light, multi −in-
formation display, instrument cluster
lights, instrument panel lights
32. ECUIG 10 A: SRS airbag system,
anti −lock brake system, vehicle stability
control system, traction control system,
brake assist system, compass, anti −
glare inside rear view mirror, electric
moon roof, power windows, multiplex
communication system
33. HTR 10 A: Air conditioning system,
rear window defogger, outside rear
view mirror defoggers
34. WASH 15 A: Windshield washer
35. S/HTR 20 A: Seat heaters
36. GAUGE1 10 A: Gauges and meters,
multi −information display, shift lock con-
trol system, turn signal lights, back −up
lights, cruise control system, charging
system, theft deterrent system, auto-
matic transmission
37. WIP 25 A: Windshield wipers
38. RAD1 20 A: Audio system 39. ECUB 10 A:
Multiplex communication
system (power door lock system, secu-
rity system, auto −door locking system,
automatic light control system, head-
light delay off system, tail light auto
cut system, illuminated entry system,
daytime running light system, wireless
remote control system), air conditioning
system, front passenger occupant clas-
sification system, gauges and meters,
vehicle stability control system
40. DOME 7.5 A: Ignition switch light, inte-
rior light, personal lights, trunk light,
vanity lights, wireless remote control
system, multi −information display
41. ECU ACC 7.5 A: Power rear view mir-
rors, multi −information display, gauges
and meters, automatic transmission,
multiplex communication system
42. CIG 15 A: Power outlet
43. P/POINT 15 A: Power outlet
44. RAD2 10 A: Audio system
45. MIR HTR 10 A: Outside rear view mir-
ror defoggers, multiport fuel injection
system/se quential multiport fuel injec-
tion system Fuses (type C)
46. DEF 40 A: Rear window defogger, out-
side rear view mirror defoggers
47. MAIN 40 A: Headlights, daytime run-
ning light system, multiport fuel injec-
tion system/sequential multiport fuel in-
jection system, “HEAD LH LWR”,
“HEAD RH LWR”, “HEAD LH UPR”,
“HEAD LH UPR” and “DRL” fuses
48. ABS No.1 50 A: Anti−lock brake sys-
tem, vehicle stability control system,
traction control system, brake assist
system
49. CDS 30 A: Electric cooling fan
50. RDI 30 A: Electric cooling fan
51. HTR 50 A: Air conditioning system
52. TSK 30 A (convertible): Convertible
top control system, quarter windows
53. PWR 30 A: Side power windows
54.

P/SEAT 30 A: Power seats
Fuses (type D)
55. ALT 120 A: “HEAD LH LWR”, “HEAD
RH LWR”, “DRL”, “A/C”, “AM2”, “HEAD
LH UPR”, “HEAD RH UPR”, “ALT −S”,
“IGN”, “IG2”, “DOOR1”, “EFI”, “HORN”,
“D.C.C”, “A/F”, “ABS No.2”, “ETCS”,
“HAZ”, “DEF”, “MAIN”, “ABS No.1”,
“CDS”, “RDI” and “HTR (50 A)” fuses