2005 TOYOTA RAV4 clock

[x] Cancel search: clock

Page 186 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
178
2005 RAV4 from Sep. 04 Prod. (OM42570U)
To reset the hour: Push the Hº button.
To reset the minutes: Push the Mº button.
If quick adjustment to a full hour is de-
sired,

Page 188 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
180
2005 RAV4 from Sep. 04 Prod. (OM42570U)
To use the glove box, do this.
To open: Pull the lever.
To lock: Insert the master key and turn it
clockwise.
CAUTION
To reduce the c

Page 203 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
195
2005 RAV4 from Sep. 04 Prod. (OM42570U)
The roof luggage carrier consists of
roof rails (1) attached to the roof and
sliding cross rails (2).
To adjust the positions of cros

Page 259 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
251
2005 RAV4 from Sep. 04 Prod. (OM42570U)
2. Turn the hold- down nuts counter-clockwise with the wheel nut
wrench and remove them.
When storing the spare tire, put it in
place

Page 260 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
252
2005 RAV4 from Sep. 04 Prod. (OM42570U)
CAUTION
Never use oil or grease on the
bolts or nuts. The nuts may loose
and the wheels may fall off,
which could cause a serious ac-

Page 262 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
254
2005 RAV4 from Sep. 04 Prod. (OM42570U)
7. Reinstall all the wheel nuts fin-ger tight.
Reinstall the wheel nuts (tapered end
inward) and tighten them as much as
you can by h

Page 299 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
291
2005 RAV4 from Sep. 04 Prod. (OM42570U)
Clean all dirt from the outside of the res-
ervoir tank and look at the fluid level. If
the fluid is cold, the level should be in the

Page 316 of 332

TOYOTA RAV4 2005 XA30 / 3.G Owners Manual 05 Rav4_U (L/O 0409)
308
2005 RAV4 from Sep. 04 Prod. (OM42570U)
3. Turn the bulb counterclockwise andremove it.4. Install a new bulb and  the connectorinto the mounting hole by turning it
clockwise
Page:   < prev 1-8 9-16 17-24 next >