2005 TOYOTA HIGHLANDER hood open

[x] Cancel search: hood open

Page 12 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
2
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
1. Side defroster outlets
2. Instrument cluster
3. Center vents
4. Electric moon roof  switch and personal
lights
5. Ga

Page 13 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
3
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
1. Side defroster outlets
2. Instrument cluster
3. Center vents
4. Electric moon roof  switch and personal
lights
5. Ga

Page 41 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
31
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
CAUTION
Keep the back door closed while driv-
ing. This not only keeps the luggage
from being thrown out but also pre-

Page 42 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
32
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
3. Hold the hood open by inserting the
support rod into the slot.
Before closing the hood, check to see that
you have

Page 43 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
33
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
The system will automatically be set after
30 seconds. When the system is  set, the
indicator light will start flashin

Page 44 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
34
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
TESTING THE SYSTEM
1. Open all the windows.
2. Set the system as described above. The side doors and back door should

Page 346 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
336
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
If engine speed does not increase when
the accelerator pedal is depressed, there
may be a problem somewhere in the el

Page 378 of 430

TOYOTA HIGHLANDER 2005 XU20 / 1.G Owners Manual ’05 HIGHLANDER_U (L/O 0409)
368
2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)
Power steering fluid level
Check the level through the reservoir. The
level should be in the “HOT” or “COLD”
Page:   1-8 9-16 next >