2005 SUBARU LEGACY display

5-31
Audio
– CONTINUED –
If you accidentally press the button and cancel the
track-repeat-play mode, press it again to reselect
the repeat play mode. "If you perform a fast-forward or fast-reverse op-
eration while the player is in repeat-play mode, the
repeat-play mode will remain active even after you
skip tracks. " If you perform a forward-direction or backward-
direction skip operation while the player is in re-
peat-play mode, the player will jump to the follow-
ing/previous track but the repeat-play mode will
remain active. " The repeat-play mode will be cancelled if you
perform any of the following steps: "Press the “ ” or “ ” side of the SEEK/
SCAN button " Press the “RPT” button.
" Press the “RDM” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. "
To repeat the currently playing disc
To repeat the currently playing CD, press the “RPT”
button twice while a track is playing. The display will
show “D-RPT”, and the CD will be played repeatedly.
To cancel the disc repeat-play mode, press the “RPT”
button once more. The “D-RPT” indication will go off,
and the normal playback mode will be resumed.
NOTE " Each time you briefly press the button, the mode
will change to the next one in the sequence shown
below.
RPT D-RPT CANCEL
RPT
UB5213BA

5-42
Audio
NOTE
While you are holding down either side of the
TUNE/TRACK button, the tuning frequency will not
stop changing even if the frequency of a receiv-
able station is reached. "
Seek tuning (SEEK)
If you press the “ ” or “ ” side of the SEEK/SCAN
button and release it within 1.5 second, the radio will
automatically search for a receivable station and stop
at the first one it finds. This function may not be avail-
able, however, when radio signals are weak. In such a
situation, perform manual tuning to select the desired
station. "
Scan tuning (SCAN)
If you press the “ ” or “ ” side of the SEEK/SCAN
button for 1.5 second or longer, the radio will switch to
scan mode. In this mode, the radio scans through the
radio band until a station is found. The radio will stop
at the station for five seconds while displaying the fre-
quency, after which scanning will continue until the en-
tire band has been scanned.
Press the “ ” or “ ” side of the button again to
cancel the scan mode and to stop on any displayed
frequency.
If you hold down the “ ” side of the button, the radio
will scan up the frequency band (from low frequencies
to high frequencies). If you hold down the “ ” side of
SEEK
SCAN
UB5212DA
SEEK
SCAN
UB5212DA

5-43
Audio
– CONTINUED –
the button, the radio will scan down the frequency
band (from high frequencies to low frequencies).
Automatic tuning may not function properly if the sta-
tion reception is weakened by distance from the sta-
tion or proximity to tall buildings and hills. !Selecting preset stations
Presetting a station with a “preset button” allows you
to select that station in a single operation. Up to six
AM, FM1 and FM2 stations each may be preset. ! How to preset stations
1. Press the “FM” or “AM” button to select FM1, FM2
or AM reception. 2. Press the “ ” or “ ” side of the button or tune
the radio manually until the desired station frequency
is displayed.
3. Press one of the preset buttons for more than 1.5
seconds to store the frequency. If the button is
pressed for less than 1.5 seconds, the preceding se-
lection will remain in memory.
NOTE "
If the connection between the radio and battery
is broken for any reason such as vehicle mainte-
nance or radio removal, all stations stored in the
preset buttons are cleared. If this occurs, it is nec-
essary to reset the preset buttons. " If a mobile telephone is placed near the radio, it
may cause the radio to emit noise when it receives
calls. This noise does not indicate a radio fault. ! Built-in CD changer operation
NOTE "Make sure to always insert a disc with the label
side up. If a disc is inserted with the label side
down, it might be ejected or the player might shutoff." If a disc is inserted during a radio broadcast, the
disc will interrupt the broadcast.
123 456
UB5210AA

5-50
Audio
below.
If you accidentally press the button and cancel the
track/file (track) repeat-play mode, press it again
to reselect the repeat-play mode. "
The repeat-play mode will be cancelled if you
perform any of the following steps: "Press the “RPT” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Press the “ ” or “ ” side of the SEEK/
SCAN button " Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. "
To repeat the currently playing disc/folder
To repeat the currently playing disc/folder, press the
“RPT” button twice while a track/file (track) is playing.
The display will show “D-RPT”, and the disc/folder will
be played repeatedly.
To cancel the disc/folder repeat play mode, press the “RPT” button once more. The “D-RPT” indication will
go off, and the normal playback mode will be resumed.
NOTE " Each time you briefly press the button, the mode
will change to the next one in the sequence shown
below.
RPT D-RPT CANCEL
RPT
RDM
UB5217BA

5-51
Audio
– CONTINUED –
If you accidentally press the button and cancel the
disc/folder repeat-play mode, press it again to re-
select the disc/folder repeat-play mode. "The disc/folder repeat-play mode will be can-
celled if you perform any of the following steps:
"Press the “RPT” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Press the “ ” or “ ” side of the SEEK/
SCAN button " Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. !
Random playback
Press the “RPT” button briefly during disc/folder play-
back to play all of the tracks/files (tracks) on the disc/
folder in a random order. The display will show “RDM”,
and all of the tracks on the disc/folder will be played in
a random order.
To cancel random playback, press the “RPT” button
again for at least 1.5 second. The “RDM” indication will
go off, and the normal playback mode will be resumed.
NOTE
Random playback will be cancelled if you perform
any of the following steps: " Press the “RPT” button
RPT D-RPT CANCEL
RPT
RDM
UB5217BA

5-53
Audio
– CONTINUED –
!Display selection
If you press the “TEXT” button for 0.5 second or longer
during playback, the indication will change to the next
one in the sequence shown below. !
Page (track/folder title) scroll
If, having pressed the “TEXT” button to select track ti-
tle or folder title display, you press the “TEXT” button
again for less than 0.5 second, the title will be scrolled
so you can see all of it. You will see eight characters
at a time.
NOTE
The display is designed to show titles for up to
eight pages (64 characters in total). However, it
may in some cases show titles for only up to four
pages (32 characters in total).
TEXT
UB5218BA
Folder number/file (track) number Track title
Folder title
TEXT
UB5218BA

5-57
Audio
– CONTINUED –
*: The frequency last received in the selected waveband will
be displayed. !“ ” and “ ” buttons
" With radio mode selected
Press the “ ” button or “ ” button. The radio will
seek the next receivable station and stop on it.
That station’s frequency will be shown on the audiodisplay. " With CD mode selected
Press the “ ” button to skip forward in the track/file
(track) order. Press the “ ” button to skip backward
in the track/file (track) order. The track/file (track) number will be shown on the au-
dio display. !
Volume control buttons
Press the “+” button to increase the volume. Press the
“–” button to reduce the volume.
A number indicating the volume will be shown on the
audio display.
UB5559CAUB5560BA

5-58
Audio
!
MUTE button
Press this button if you wish to immediately cut the vol-
ume to zero.
The audio display will show “MUTE”. Precautions to observe when han-
dling a compact disc
Use only compact discs (CDs, CD-Rs and CD-RWs)
that have the mark shown below. Also, some compact
discs cannot be played.
UB5560CA
UB5221AA