2005 SUBARU FORESTER USB port

11 - 5 4
Maintenance and service
A) Stopper
Be sure to position the claws at the end of the metal
support between the stoppers on the rubber as shown.
If the rubber is not retained properly, the wiper blade
may scratch the windshield.
6. Install the wiper blade assembly to the wiper arm.
Make sure that it locks in place.
7. Lower the wiper arm. „
Rear window wiper blade
1. Raise the wiper arm off the rear window.
2. Turn the wiper blade assembly counterclockwise.
A
HSB062BC
USB581BA

11 -5 5
Maintenance and service
– CONTINUED –
3. Having turned the wiper blade assembly to the an-
gle shown in the illustration, pull it in the direction of
the arrow to remove it from the wiper arm. A) Plastic support
4. Pull out the end of the blade rubber assembly to un-
lock it from the plastic support.
USB582BA
A
USB585BC

11 - 5 6
Maintenance and service
5. Pull the blade rubber assembly out of the plastic
support.
A) Metal spines
6. If the new blade rubber is not provided with two
metal spines, remove the metal spines from the old
blade rubber and install them in the new blade rubber.
USB586BA
A
USB583BC

11 -5 7
Maintenance and service
– CONTINUED –
7. Align the claws of the plastic support with the
grooves in the blade rubber assembly, then slide the
blade rubber assembly into place. Securely lock the end of the plastic support as shown
in the illustration. If the rubber is not retained properly,
the wiper may scratch the rear window glass.
8. Install the wiper blade assembly to the wiper arm.
Make sure that it locks in place.
9. Lower the wiper arm.
USB586CAUSB584BA