Page 26 of 75

RADIO NAVIGATION SYSTEM25
AUDIO
Notes on using the CD changer
CD label
This system was designed to play only CDs
with the following label:
Skipping during playback
CDs may skip while you are driving over very
uneven ground or when subjected to strong
vibrations. In this case, wait until the road con-
ditions improve before playing CDs.
Condensation
Condensation may occur in the CD changer
housing when it is cold or after rain showers.
This can lead to skipping or make playback
impossible. In this case, allow the CD changer
housing to dry before you use it.Notes on cleaning compact discs and nav-
igation CD ROMs
Clean CDs and CD ROMs with a soft, lint-free
cloth. Wipe the CDs in a straight line from the
middle to the outside edge. Use a commer-
cially available CD cleaner to remove more
stubborn dirt.
Never use such solvents as petrol, paint thin-
ner or LP cleaner as these might damage the
surface of the CD!
Audio/video equipment
Using an adapter cable, you can connect your
navigation system to other audio equipment,
which can then be activated with “AUX” in the
“Select source” menu. For more information,
contact your
·kodaAuto Service Centre.
Tips on CD operation
To ensure trouble-free, high-quality CD play-
back, play only clean CDs without scratches
or other damage.
Always keep CDs in the storage compartment
available in the original
·kodaAuto accessory
program or in their original cases.
Never expose the CDs to direct sunlight!
Do not write on or put stickers on the CDs!
Page 27 of 75

RADIO NAVIGATION SYSTEM26
NAVIGATION
Accessing the main navigation menu
Press NAVI
77 77
7 to switch from the audio display
to navigation display.
•With the navigation display on the screen,
press NAVI 77
77
7 to activate the main navigation
menu. This will cancel any actions you have
not yet completely entered or active route guid-
ance.
– The selection bar will mark the “Enter des-
tination” menu field if you have not yet en-
tered a destination .
– The selection bar will mark the “Start guid-
ance” menu field if you have already entered
a destination .
Note
If you press NAVI
77 77
7 during route guidance,
the “Back to guidance” menu field will appear
in the main navigation menu.
Accessing subsequent menus, selecting
options
•Mark and confirm the desired menu field.
Main navigation menu - overview
Main navigation menu
Enter destination (page 27)
Enter your destination by entering the desti-
nation address, selecting it on the map or re-
calling it from the destination memory.
Route options (page 42)
Select route options and calculate the route
list.
Start route guidance (page 44)
Select the map or symbol display, align or
move the map, select the map type.
Destination memory (page 49)
Save and edit destinations in the alphabetical
destination memory and the Top 10 memory.
Travel guide (page 60)
View travel information (e.g. hotel prices and
special features) on other destinations and se-
lect these destinations.
If the navigation CD used does not contain this
information, this menu field will not appear.
Settings (page 61)
Make settings (e.g. display mode for route guid-
ance).
Info mode (page 48)
Displays the current vehicle location in the map
or symbol display without active route
guidance.
Page 66 of 75

RADIO NAVIGATION SYSTEM65
TV
AUDIO button-Activates audio menu
RETURN button -Leaves menus
NAVI button -Activates navigation
menu
SEARCH button -Starts search
MEMORY button -Stores stations and
goes to stored stationsIntroduction
The TV tuner enables you to receive television
programmes when your vehicle is stationary.
The TV picture appears on the screen of your
navigation unit and the sound comes through
the vehicle’s loudspeakers.
Controls
To activate and operate the TV function, use
the following controls:
Menu button
-To select menu fields,
tune into stations and
select videotext pages:
turn button
- To confirm menu fields
and selected videotext
pages: press button
TV Tuner
1
2
3
NAVI
AUDIO
Television mode*
Switching on television mode
•Press the AUDIO button.
The audio menu (select source) appears.
If you are in navigation mode, you have to
press the AUDIO button twice.
•Select and confirm the menu field “TV”.
The TV station last selected appears on the
screen and on the display of the combined in-
strument “AUX”.
Note
The TV picture is dimmed when the vehicle is
in motion, but the TV sound continues to be
audible. The announcement “For your safety,
no TV picture is shown while the vehicle is in
motion” is faded in.
* Available from manufacturer.
Page 67 of 75

RADIO NAVIGATION SYSTEM66
TV
Switching off television mode
•Go to the audio menu by pressing the AU-
DIO button.
•Select and confirm the desired audio
source.
Press the NAVI button to go to the navigation
menu.
Fade in programme information
•Press the RETURN button.
The following appears on the TV screen:
the programme position: P:M1,
the channel, CHAN 27
and, where reception quality allows, the sta-
tion name (eg ZDF).
Note
These details are also faded in after a change
of programme position or channel.Station search
There are two channel search options to
choose from.
Option 1:
By pressing the SEARCH button, you can se-
lect a different station.
•Tap the SEARCH button on the right to se-
lect the next station
•Tap the SEARCH button on the left to se-
lect the previous station
Option 2
•Turn the menu button to the right to select
the next channel
•Turn the menu button to the left to select
the previous channel
The programme and respective channel are
faded in for your information.
Note
The SEARCH button and the menu button are
also used to make brightness, colour and con-
trast adjustments (see the chapter “Screen
settings”).
Page:
< prev 1-8 9-16 17-24