PARKING BRAKE LINING AND DRUM PARKING BRAKES36-8 REMOVAL SERVICE POINTS <> REAR BRAKE ASSEMBLY REMOVAL Remove the rear brake assembly and support it with wire or something similar. <> REAR BRAKE CHAMBER RETAINER REMOVAL Use a flat-tipped screwdriver or a similar tool to open up the rear brake chamber retainer joint. Then remove the rear brake chamber retainer. INSTALLATION SERVICE POINTS >>A<< REAR BRAKE WASHER INSTALLATION Install the rear brake washer in the direction shown in the illustration. >>B<< REAR BRAKE CHAMBER RETAINER INSTALLATION Use pliers or a similar tool to close the rear brake chamber retainer end onto the pin. >>C<< SHOE SLACK ADJUSTER INSTALLATION Install the shoe slack adjuster so that the shoe adjusting bolt for the left rear wheel is attached towards the front of the vehicle, and the shoe adjusting bolt for the right rear wheel is towards the rear of the vehicle. AC000924 AG Rear brake secondary shoe assembly pin Rear brake chamber retainer AC304675ABRear brake secondary shoe assemblyRear brake chamber retainer Parking brake operating lever Rear brake washer AC000926 AI Rear brake secondary shoe assembly pin Rear brake chamber retainer AC304676AB Shoe adjusting bolt Shoe adjusting bolt Left rear wheel Right rear wheel Rear of the vehicle Rear of the vehicle
