2005 MERCEDES-BENZ SLK-Class key

92 Satellite radio*Satellite radio operation
Press the
Service
soft key.
The telephone number of the Sirius
Service Center and the twelve-digit
electronic serial number (ESN) of your
vehicle's receiver appear.It may be necessary to call the Sirius Ser-
vice Center if, for example:

you want to cancel the subscription or
to re-subscribe at a later date

you forget to pay the bill

you sell the car to another person
Calling the Sirius Service Center

98 Telephone*Telephone operationThe following conditions must be met for a
“911” emergency call:
cell phone readily inserted in cradle

telephone switched ON

available cell phone networkThe 911 emergency call will also function if
the telephone is locked.
Placing an emergency call
An emergency call can be placed using the
cell phone or the COMAND control unit.
Using the cell phone
(
Telephone Operation Guide).Using the COMAND control unit before
PIN or unlock code entry

Press the
911
soft key.
The system opens an inquiry menu
prompting you if you want to dial a
911 call.
911 emergency callWarning
G
The “911” emergency call system is a
public service. Using it without due
cause is a criminal offense.
iIf you cannot make an emergeny call,
you will have to initiate rescue mea-
sures yourself.

99 Telephone*
Telephone operation

If necessary, press  to select
Yes
.

Press  to confirm
Yes
if you want to
place the 911 emergency call.
The telephone establishes the connec-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
If you do not want to place the emergency
call:

Press  to select
No when the inquiry
menu appears.

Press  to confirm
No.Using the COMAND control unit after
PIN and unlock code entry

Press repeatedly until the Tele-
phone main menu appears.
In succession, press the number keys !,
3 and 3.

Press0.
The telephone establishes the connec-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.Entering the PIN (only GSM) iThe PIN may be entered on the cell
phone itself (
Telephone Operation
Guide).


100 Telephone*Telephone operationThe PIN protects the telephone against un-
authorized use. Your PIN is found in the
telephone service provider's documenta-
tion.
Commit your PIN to memory.
Most telephone functions are not available
before entering the PIN.

Press the corresponding number key
3 - " for each digit.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.If the input is incorrect, message
Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM card
blocked
will appear briefly.

The PUK has to be entered.
(Telephone Operation Guide)
iThe telephone cannot be used before it
is logged-in.

101 Telephone*
Telephone operation
The unlock code protects the telephone
against unauthorized use. To activate the
unlock code (
Telephone Operation
Guide).
Commit your unlock code to memory.
Most telephone functions are not available
before entering the unlock code.
Example: unlock code 2307

In sequence, press the number
keys, ," and .
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

After entering all digits, press or the OK soft key.
All telephone functions are available if
the correct number has been entered.
After registering, information referring
to the telephone signal appears at the
right end of the status bar.
The unlock code has to be entered
again if the entry was incorrect.
Entering the unlock code iThe screen switches back to the last
active mode if the unlock code is not
entered within 8 seconds after you are
prompted to do so.

103 Telephone*
Telephone operation

READY
= telephone is logged into your
mobile communcations home network
and ready for use,

ROAMING
= telephone is logged into a mo-
bile communications network outside
your home network,

NO SERV.
= no network available,

= telephone signal strength,

= call active (
page 110).
Other messages could also appear:

If the message Please insert phone
, Phone not installed
or
Please insert SIM card

appears, see chapter “Switching the
phone ON / OFF” (
page 97).

If the messagePlease Enter PIN:
appears, see “Enter-
ing the PIN” (
page 99).

If the message Enter unlock code:
appears, see “Enter-
ing unlock code” (page 101).
Selectable soft keys and options

soft key
Opens the phone book (
page 112),

Recvd.#
soft key
Opens the accepted and missed calls
list (
page 107),

Dialed #
soft key
Opens dialed calls list (
page 108),

SMS
soft key
Provides access to the SMS menu
(page 116),

Entry of a phone number (
page 105).
iIf a list is empty, the corresponding soft
key ( ,
Recvd.#
, Dialed #
or
SMS
) is
without function and appears shaded
out.

105 Telephone*
Telephone operation
On the multifunction steering wheel
Presst
.
The desired phone number has to be en-
tered when placing an outgoing call.
The following options are available:

entering a phone number directly

initiating redial (
page 106)

selecting an entry in the accepted and
missed calls list (
page 107)

selecting an entry in the dialed calls list
(page 108)

using speed dial (
page 110)

opening the phone book and selecting
an entry (
page 114)
Entering a phone number

Open the Telephone main menu
(page 102).

Use" - ! to enter the phone num-
ber.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

After entering the phone number,
press0.
The telephone dials the entered num-
ber.
The call is activated the moment the
other party answers the call. Communi-
cation is conducted via the hands-free
system.
The volume can be adjusted
(page 30).
For other user functions, see “Active
call” (
page 110).
iIt is also possible to accept, refuse or
end a call from the cell phone
(Telephone Operation Guide).
Placing an outgoing call

107 Telephone*
Telephone operation
COMAND automatically creates a list of
accepted and missed calls. This list can
contain 10 entries max.
The accepted and missed calls list can be
opened, an entry selected, and the call re-
turned.
Selecting an entry from the list of ac-
cepted and missed calls.
Opening of list: 
Press the
Recvd.#
soft key in the Tele-
phone main menu (page 102).
The list appears with the last call high-
lighted.
The list is sorted chronologically, the
last accepted or missed call is dis-
played at the top of the list.Switching list displays:

Press the
123
soft key.
The list switches to number display.
If a name in the phone book is stored
with the number of the highlighted call
it is shown in the status bar;
or
iIf no calls have been received yet the Recvd.#
soft key is shaded out and with-
out function.
iThe list shows up to ten calls you re-
ceived last. It is a combined listing of
both accepted and missed calls. The
list does not show or specify which
calls were accepted and which ones
were missed.