Page 159 of 215
158 Navigation*During route guidance
The map appears. The route remaining
is highlighted in blue.
The destination is marked with a flag
, any stop-over destination is marked
with a flag . The current vehicle posi-
tion is identified with the symbol.
Depending on the distance to the des-
tination, it may take some time before
the route display appears.
In the Info menu (
page 157), press
the
Route
soft key.
The route appears on the map.
Press the
List
soft key.The list of road/route sections remain-
ing appears.
The road currently travelled on appears
at the top.
Press or to scroll through the
list.
The
Page
soft keys allow scrolling
through the list page by page.
s
Displaying the route list
iDepending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed.
Dest.
is
displayed before the last list entry.
Page 160 of 215
159 Navigation*
During route guidance
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route if possible.
Show the soft key displays
(page 156).
.
Detour function is not active:
You can activate the function and set
the length of a route segment to be
blocked;
or
Detour function is already active:
You can change the length of the route
segment to be blocked (
page 160),
or switch OFF the Detour function by
deleting the detour (
page 160).
Activating detour function and setting
length of route segment to be blocked
If the soft key displays are shown
(page 156), press the
Detour
soft key.The system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
Continue to press the
More
or
Less
soft
key until the desired route segment to
be blocked is reached.
The length of the route segment
blocked ahead appears in the status
bar. The section of the road that is
blocked appears as a red and white
dotted line on the map.
Detour function iThe
Detour
soft key display indicates
whether the Detour function is active.
= not active.
= active.
Page 161 of 215
160 Navigation*During route guidance1Symbol = current position
Press .
The system calculates a new route
avoiding the blocked road segment.Changing detour
If the soft key displays are shown
(page 156), press the
Detour
soft key.
Use to select the
Change detour
menu item.
Press .
You can now enter the length of the
road segment to be blocked.
Continue to press the
More
or
Less
soft
key until the desired distance for the
route segment to be blocked is set.
Press .
The system calculates a new route
avoiding the blocked segment if possi-
ble.
Deleting detour
Show the soft key displays
(page 156).
If a Detour is already active, the
Detour
soft key is displayed with no color.
Press the
Detour
soft key.
Page 162 of 215
161 Navigation*
During route guidance
Use to select the
Delete detour
menu item.
Press .
The blocked road segment is can-
celled. The system recalculates the
route.The Stop-over function offers the option of
selecting a stop-over destination while
route guidance is active.
A stop-over destination can be, for exam-
ple, a gas station, a rest area, or a hospital,
but also a regular destination. Once the
stop-over destination has been reached,
the system automatically calculates the
route to the final destination.
Show the soft key displays
(page 156).
.
Stop-over
iThe
St-over
soft key display indicates
whether route guidance to a stop-over
is already active.
= not active.
= active.
Page 163 of 215
162 Navigation*During route guidance
Route guidance to a stop-over destina-
tion is not active:
You can enter a stop-over destination;
or
Route guidance to a stop-over is al-
ready active:
You can change the stop-over destina-
tion or cancel the route guidance to it
by deleting the stop-over (
page 164).
Entering a stop-over destination
The soft key displays are shown
(page 156).
Press the
St-over
soft key.
The full-screen map display appears.Selectable soft keys
soft key
Provides access to a list of Mercedes-
Benz Centers in the area,
soft key
Provides access to a list of gas stations
in the area,
soft key
Provides access to a list
of parking ar-
eas and multi-story car parks in the area,
soft key
Provides access to a list of restaurants
in the area,
soft key
Provides access to a list of hospitals in
the area,
Other
soft key
Provides access to the Destination en-
try menu (
page 135).
Page 164 of 215
163 Navigation*
During route guidance
Press one of the soft keys, for example
the soft key.
One of several food categories can be
chosen (if available).
Use or to select a category
from the list.
The
Page
soft keys allow scrolling
through the list page by page.
Press .
If appropriate destinations are avail-
able, a list with restaurants in the area
appears.
Use or to select a destination
from the list.
The
Page
soft keys allow scrolling
through the list page by page.
Press the
Details
soft key if you want to
see details of a selected destination.
The details disappear again after
approx. 3 seconds, or when pressing
the
Details
soft key again.
iThe arrows point in the direction of the
destination.
Distance information specifies the di-
rect distance to the destination.
Page 165 of 215
164 Navigation*During route guidance
Press to confirm the selection of the
destination.
The system begins to calculate the
route to the selected stop-over destina-
tion.
Changing/deleting the stop-over desti-
nation
The soft key displays are shown
(page 156).
.
Press the
St-over
soft key.
The menu for deleting or changing the
stop-over destination appears.
Use to select the Delete active stopover
entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination;
or
iA stop-over destination can be
changed or deleted only while the route
guidance to this stop-over is active (in-
dicated by .
If no route guidance to a stop-over des-
tination is active yet (
page 162).
Page 166 of 215
165 Navigation*
During route guidance
Use to select the Replace active stopover
entry.
Press .
The stop-over is deleted, a new stop-
over destination can be entered
(page 162).
The soft key displays are shown
(page 156).
Press the
Display
soft key.
The Display menu appears.Selectable soft keys
Symbols
soft key
Provides access to setting the symbols
display (page 166),
View
soft key
Provides access to setting the map ori-
entation (
page 167),
GPS
soft key
Provides access to the Position Display
menu (
page 168),
Auto
soft key
Provides access to the Automatic Map
Switching menu (
page 169),
Zoom
soft key
Provides access to the definition of the
scales for full-screen and split-screen
map display (
page 170).
Defining route guidance displays
