Page 44 of 474

42 Getting startedAdjustingSteering wheel Steering wheel adjustment
The stalk for steering wheel adjustment is 
located on the lower left of the steering 
column.
1Adjusting steering column, in or out
2Adjusting steering column, up or down
Switch on the ignition (
page 36).
or
Open the driver’s door.Adjusting steering column in or out
Move stalk forward or back in direction 
of arrow1 until a comfortable steer-
ing wheel position is reached with your 
arms slightly bent at the elbow.
Adjusting steering column up or down
Move stalk up or down in direction of 
arrow2.
Make sure your legs can move freely 
and that you have a good view on all 
the displays (including malfunction and 
indicator lamps) on the instrument 
cluster.
For more information, see “Heated steer-
ing wheel* (SL 500, SL 600)” 
(
page 234).
Warning!
G
Do not adjust the steering wheel while driv-
ing. Adjusting the steering wheel while driv-
ing could cause the driver to lose control of 
the vehicle.
When leaving the vehicle, always remove the 
SmartKey or the SmartKey with 
KEYLESS-GO* from the starter switch, take 
it with you, and lock the vehicle.
Even with the SmartKey or the SmartKey 
with KEYLESS-GO* removed from the 
starter switch or the SmartKey with 
KEYLESS-GO* removed from the vehicle, 
the steering wheel adjustment feature can 
be operated when the driver’s door is open. 
Therefore, do not leave children unattended 
in the vehicle, or with access to an unlocked 
vehicle. Unsupervised use of vehicle equip-
ment may cause an accident and/or serious 
personal injury.
iThe memory function (
page 120) lets 
you store the setting for the steering 
wheel together with the settings for the 
seat position and the exterior rear view 
mirrors. 
     
        
        Page 51 of 474

49 Getting started
Driving
Starting with KEYLESS-GO*
You can start your vehicle without the 
SmartKey in the starter switch using the 
KEYLESS-GO start/stop button on the 
gear selector lever.KEYLESS-GO start/stop button1USA only
2Canada only
M a k e  s u r e  t h e  g e a r  s e l e c t o r  l e v e r  i s  s e t  
to P. 
Depress the brake pedal during the 
starting procedure. Do not depress ac-
celerator.
The selector lever lock is released.
Press KEYLESS-GO start/stop 
button1 once.
The engine starts automatically if the 
SmartKey with KEYLESS-GO is in the 
vehicle.
For information on turning off the engine 
with KEYLESS-GO, see “Turning off with 
KEYLESS-GO*” (
page 59).
Starting difficulties
If the engine does not start as described, 
carry out the following steps:
If you are starting the engine with the 
SmartKey: Turn SmartKey in starter 
switch to position0 and repeat starting 
procedure.
If you are starting the engine with 
KEYLESS-GO*: Close any doors that 
may be open to allow for better detec-
tion of the SmartKey with 
KEYLESS-GO.
Or:
Start the engine with the SmartKey as 
radio signals from another source may 
be interfering with the SmartKey with 
KEYLESS-GO*.
Repeat the starting procedure 
(page 48). Remember that extended 
starting attempts can drain the battery.
Get a jump start (
page 406).
If the engine does not start after several 
starting attempts, there could be a mal-
function in the engine electronics or in the 
fuel supply system.
Notify an authorized Mercedes-Benz 
Center. 
     
        
        Page 52 of 474

50 Getting startedDrivingParking brake
1Parking brake
2Parking brake release handle
Release the parking brake by pulling on 
handle2.
The indicator lamp;(USA only) or 
3 (Canada only) in the instrument 
cluster goes out. 
Driving
Depress the brake pedal.
Place the gear selector lever in 
positionD orR.
Release the brake pedal.
Carefully depress the accelerator 
pedal.
Warning!
G
When leaving the vehicle, always remove the 
SmartKey or the SmartKey with 
KEYLESS-GO* from the starter switch, take 
it with you, and lock the vehicle. Do not 
leave children unattended in the vehicle, or 
with access to an unlocked vehicle. Children 
could release the parking brake, which 
could result in an accident and/or serious 
injury.
Warning!
G
It is dangerous to shift the gear selector le-
ver out ofP orN if the engine speed is high-
er than idle speed. If your foot is not firmly 
on the brake pedal, the vehicle could accel-
erate quickly forward or in reverse. You 
could lose control of the vehicle and hit 
someone or something. Only shift into gear 
when the engine is idling normally and when 
your right foot is firmly on the brake pedal.
Warning!
G
On slippery road surfaces, never downshift 
in order to obtain braking action. This could 
result in drive wheel slip and reduced vehi-
cle control. Your vehicle’s ABS will not pre-
vent this type of loss of control.!In order to avoid damage to the trans-
mission:
Wait for the gear selection process 
to complete before setting the vehi-
cle in motion.
Place the gear selector lever in 
positionD orR only when the vehi-
cle is stopped. 
     
        
        Page 56 of 474

54 Getting startedDrivingSingle wipe
Press the combination switch briefly in 
direction of arrow1.
The windshield wipers wipe one time 
without washer fluid.
Wiping with windshield washer fluid
Push the combination switch in direc-
tion of arrow1 past the resistance 
point.
The windshield wipers operate with 
washer fluid.
For information on filling up the washer 
reservoir, see “Windshield washer system 
and headlamp cleaning system” 
(
page 278).
!If anything blocks the windshield 
wipers (leaves, snow, etc.), switch 
them off immediately.
For safety reasons,
turn off the engine by turning 
the SmartKey to position 0 and 
withdraw the SmartKey from 
the starter switch
or
turn off the engine by pressing 
the KEYLESS-GO* start/stop 
button and open the driver’s 
door (with the driver’s door 
open, the starter switch is in po-
sition 0, same as with the 
SmartKey removed from the 
starter switch)
before attempting to remove any 
blockage.
Remove blockage.
Turn the windshield wipers on 
again.
If windshield wipers fail to function at 
all in switch positionI,
set the combination switch to the 
next higher wiper speed
have the windshield wipers 
checked at the nearest authorized 
Mercedes-Benz Center 
     
        
        Page 58 of 474

56 Getting startedParking and lockingYou have now completed your first drive. 
You have properly stopped and parked 
your vehicle. End your drive as follows.Warning!
G
With the engine not running, there is no 
power assistance for the brake and steering 
systems. In this case, it is important to keep 
in mind that a considerably higher degree of 
effort is necessary to brake and steer the ve-
hicle.
Warning!
G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or 
leaves can come into contact with the hot 
exhaust system, as these materials could be 
ignited and cause a vehicle fire.
To reduce the risk of personal injury as a re-
sult of vehicle movement, before
 turning off 
the engine and leaving the vehicle always:
Keep right foot on brake pedal.
Firmly depress parking brake pedal.
Move the gear selector lever to 
positionP.
Slowly release brake pedal.
When parked on an incline, turn front 
wheels towards the road curb.
Turn the SmartKey in the starter switch 
to position0 and remove the SmartKey 
from the starter switch, or press the 
start / stop button (vehicles with 
KEYLESS-GO*).
Take the SmartKey or the SmartKey with 
KEYLESS-GO* and lock vehicle when 
leaving. 
     
        
        Page 59 of 474

57 Getting started
Parking and locking
Parking brake
1Parking brake
2Release handle
Step firmly on parking brake1.
When the engine is running, the indica-
tor lamp;(USA only) or3 
(Canada only) in the instrument cluster 
will be illuminated.
Switching off headlamps
Turn the exterior lamp switch to posi-
tion M (
page 51).
For more information, see “Exterior lamp 
switch” (
page 123).
Warning!
G
When leaving the vehicle, always remove the 
SmartKey or the SmartKey with 
KEYLESS-GO* from the starter switch, take 
it with you, and lock the vehicle. Do not 
leave children unattended in the vehicle, or 
with access to an unlocked vehicle. Children 
could release the parking brake and/or 
move the gear selector lever from 
positionP, either of which could result in an 
accident and/or serious injury.
Warning!
G
Getting out of your vehicle with the gear se-
lector lever not fully engaged in positionP is 
dangerous. Also, when parked on an incline, 
positionP alone may not prevent your vehi-
cle from moving, possibly hitting people or 
objects.
Always set the parking brake in addition to 
shifting to positionP (
page 167).
When parked on an incline, also turn front 
wheels towards the road curb. 
     
        
        Page 61 of 474

59 Getting started
Parking and locking
For more information, see “Locking and 
unlocking” (
page 94).Turning off with KEYLESS-GO* 
Place the gear selector lever inP.
Press the KEYLESS-GO start/stop but-
ton to shut off the engine.
With the driver’s door closed, the start-
er switch is now in position1. With the 
driver’s door opened, the starter switch 
is set to position0, same as SmartKey 
removed from starter switch 
(page 36). 
Press the seat belt release button 
(page 45).
Allow the retractor to completely re-
wind the seat belt by guiding the latch 
plate.
Warning!
G
When leaving the vehicle, always remove the 
SmartKey from the starter switch, take it 
with you, and lock the vehicle. Do not leave 
children unattended in the vehicle, or with 
access to an unlocked vehicle. Unsuper-
vised use of vehicle equipment may cause 
an accident and/or serious personal injury.
iIf you hear a warning signal you have 
either
forgotten to turn off the lights be-
fore opening the driver’s door
or
tried to turn off the engine while the 
gear selector lever is not inP 
Turn off the lights or place the gear se-
lector lever inP.
iOpening a door causes the windows on 
that side of the car to open slightly. 
They will return to the up position when 
the door is closed. 
     
        
        Page 62 of 474

60 Getting startedParking and locking1Lock button on the door handle
After exiting the vehicle, press lock 
button1 on the door handle or the 
lock button on the trunk lid 
(page 104).
All turn signal lamps flash three times. 
The locking knobs on the doors move 
down. The anti-theft alarm system is 
armed.
For more information, see “Locking and 
unlocking” (
page 94).
Emergency engine shut-down
If the engine cannot be turned off as de-
scribed, you may use the following backup 
procedure.
Open the main fuse box (
page 412).
Pull out the two fuses labeled “ENGINE 
EMERGENCY STOP”.
Warning!
G
To prevent possible personal injury, always 
keep hands and fingers away from the door 
openings when closing the doors. Be espe-
cially careful when small children are 
around.
Before closing doors, make sure that there 
is no possibility of someone getting caught 
in a door during closing.
Warning!
G
When leaving the vehicle, always remove the 
SmartKey or the SmartKey with 
KEYLESS-GO* from the starter switch, take 
it with you, and lock the vehicle. Do not 
leave children unattended in the vehicle, or 
with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment may 
cause an accident and/or serious personal 
injury.