2005 MERCEDES-BENZ SL-Class time

56 Audio
MP3-CD operation
Treat MP3-CDs with care to prevent
malfunctions during playback.
Do not scratch, touch or soil your MP3-
CDs.
Do not attach labels to or write on your
MP3-CDs.
From time to time, clean your MP3-CDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
After use, put your MP3-CDs into the
CD box.
Protect your MP3-CDs from high
temperatures and direct sunlight.
Activate the MP3-CD main menu
(
page 57).
or
Load an MP3-CD into the COMAND
(
page 56).
CD drive
Loading an MP3-CD
Insert a MP3-CD into the slot
(
page 14). The MP3-CD should be
inserted with the label side up.
The COMAND pulls the MP3-CD into
the drive. The display changes.
Tips on caring for your MP3-CDsSwitching to MP 3-CD operation
i
The MP3-CDs are played in the same
drive as normal audio CDs.
The MP3-CD drive is above the display.
WarningG
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
WarningG
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
i
A CD already loaded must be ejected
before inserting a new MP3-CD.
Inserting a second MP3-CD with
another CD still loaded will cause
damage to the CD drive which is not
covered by the Mercedes-Benz Limited
Warranty.
230_Audio_US_B.fm Seite 56 Mittwoch, 8. Dezember 2004 4:28 16

57
Audio
MP3-CD operation
After that the message Loading
Medium Please Wait
will appear.
After loading, the MP3-CD main menu
(
page 57) will appear. Playback
begins. Ejecting an MP3-CD
With the COMAND switched on, press
l
.
The system ejects the MP3-CD already
loaded.
Remove the MP3-CD from the slot.
Insert another MP3-CD into the slot.
The MP3-CD should be inserted with
the label side up.
Activate the Audio menu (page 34).
Press the MP3-CD soft key.
or
Load a MP3-CD (page 56).
The MP3-CD main menu will appear.
MP3-CD main menu
1 Current track/number of tracks on the
current MP3-CD
2 Elapsed playback time of the current
track
i
If you do not remove the MP3-CD from
the slot within around 15 seconds, the
COMAND will pull the MP3-CD into the
drive again.
MP3-CD main menu
230_Audio_US_B.fm Seite 57 Mittwoch, 8. Dezember 2004 4:28 16

58 Audio
MP3-CD operation
The first line shows the name of the
current folder. At the center you see the
currently played track.
Activate the MP3-CD main menu.
(
page 57).
Use H or h to select a folder.
The track list only displays the tracks of
the selected folder.
Playback of the first track of the
selected folder will begin.
You can select a track:
in the track list (page 58)
with the number keypad (page 58)
with g or h (page 59)
with MP3-CD track scan (page 59) In the track list
The track list includes all tracks of the
selected folder of the currently played
MP3-CD. Only one list entry is visible at a
time.
Open the MP3-CD main menu
(
page 57).
Press
G or g .
The track list is displayed. You will see
up to 3 entries. The track shown in
black is the one currently playing.
Press G.
You move forward through the track
list.
Press g.
You move backward through the track
list. With the number keypad
Activate the MP3-CD main menu
(
page 57).
In short succession, press button
*
and the number key of the desired
track, e.g. 24.
After your entry wait approx. 3
seconds.
The selected track is played. The
MP3-CD main menu will appear.
Selecting a folder
Selecting a track
i
If the current folder contains less
tracks, the system will only recognize
the first digit entered and play the ap-
propriate track.
230_Audio_US_B.fm Seite 58 Mittwoch, 8. Dezember 2004 4:28 16

59
Audio
MP3-CD operation
Skip Track
Activate the MP3-CD main menu
(
page 57).
Forward
Press D .
The next track from the track list is
played.
Backward
Press d.
If the track has been playing for more
than approx. 10 seconds, the track is
replayed from the start. If the playing
time is shorter, the previous track is
played. MP3-CD track scan
The tracks of the current folder can be
scanned one after the other for 8 seconds
each. Subfolders ar
e not considered.
The function will switch off automatically
when the starting is reached.
You can also manually stop the scan
search.
Starting the Scan SearchActivate the MP3-CD main menu
(
page 57).
Press the Scan soft key. Ending the scan function
Scan search is running.
Press the Scan soft key.
or
Press E.
The last scanned trac k is played back.
i
When you start the scan search, the
playback mode
Normal Sequence
(page 60) is automatically activated.
230_Audio_US_B.fm Seite 59 Mittwoch, 8. Dezember 2004 4:28 16

61
Audio
MP3-CD operation
Folder Mix
The tracks of the current folder and its
sub-folders are played in alphabetical
order.
CD-ROM Mix
All tracks of the MP3-CD are played in
random order.
Repeat Track
The system repeats the current track
until you switch the function off.
Repeat Folder
The system repeats the tracks of the
current folder until you switch the
function off.
Folder
Use the
Folder option to navigate
through the structur e of an MP3-CD.
Opening the folder menu
Activate the MP3-CD main menu
(
page 57).
Press the Folder soft key.
The names of the folders on the current
MP3-CD are displayed. 1
Current track/number of tracks on the
current MP3-CD
2 Elapsed playback time of the current
track
Use g or G to select a folder.
Press E.
The list of the tracks in the folder is
displayed. 5 tracks are displayed.
MP3 options
i
Only those folders or sub-folders are
displayed which contain the MP3
tracks.
230_Audio_US_B.fm Seite 61 Mittwoch, 8. Dezember 2004 4:28 16

64 Audio
DVD operation
From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
After use, put your DVDs into the DVD
box.
Protect your DVDs from high
temperatures and direct sunlight.
Load a video DVD into the COMAND
(
page 65).
or
If a DVD is already loaded, open the Au-
dio menu (
page 34) and press the
DVD soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
page 70) saved
on the DVD will appear.
DVD playback requirements
i
Vendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
Regional code is set (factory
setting)
NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed at an
authorized Mercedes-Benz Center. This
will allow you to playback video DVDs
with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.
i
The COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.
Switching to DVD operation
230_Audio_US_B.fm Seite 64 Mittwoch, 8. Dezember 2004 4:28 16

67
Audio
DVD operation
When you start DVD playback, the soft key
displays and the status bar are initially
blanked out.
Displaying the soft keys
In the DVD mode, press any soft key.
The soft keys and the status bar are
displayed.
DVD playback with soft key display and
status bar
The DVD information is displayed at the
center of the status bar.
E.g.:
Ttl. 5 = Track/movie no. 5 is being
played
Sce. 1 = Scene/chapter 1 is being
played
0:00:47 = DVD playing time elapsed
(47 seconds)
The soft keys and the status bar are auto-
matically blanked out again. You can also
blank out the display manually.
To remove the soft key display
Press the Full Scr. soft key.
Soft key display and status bar
230_Audio_US_B.fm Seite 67 Mittwoch, 8. Dezember 2004 4:28 16

68 Audio
DVD operation
Pause or Play soft key:
Switches the Pause function on or off
(
page 68).
Stop soft key:
Stops the DVD playback (
page 69).
Full Scr. soft key:
The soft key display disappears
(
page 69).
Menu soft key:
Displays the DVD menu saved on the
DVD, if available (
page 70).
Setting soft key:
Displays the DVD settings menu
(
page 71).
Sound soft key:
Brings you to the sound menu, where
you can set:
Balance (page 29)
Bass and Treble (page 30)
Sound functions* (page 31)
Bright., Contr. and Color soft
key
s:
Allow you to adjust brightness, cont-
rast and color (
page 74). Pause function
Display the soft keys (page 67).
Press the
Pause soft key.
DVD playback is paused. The picture
stands still. The
Pause soft key
changes to
Play.
To resume playback, press the Play
soft key.
Playback of the DVD will resume.
Soft key functions
i
Depending on the DVD, not all func-
tions are available at any time.
230_Audio_US_B.fm Seite 68 Mittwoch, 8. Dezember 2004 4:28 16