2005 MERCEDES-BENZ ML500 child restraint

73 Safety and Security
Occupant safety
Child seat anchors – LATCH type
This vehicle is equipped with two LATCH
(Lower A
nchors and T
ethers for CH
ildren)
type anchors (at each of the rear seats) for
the installation of a LATCH child seat with
matching mounting fittings.
1Anchors

Install a LATCH type child seat accord-
ing to the manufacturer’s instructions.
!An infant and child restraint system
must not be installed on the right
second row seat while a passenger
rides in a third row seat. An infant and
child restraint system installed on the
right second row seat will prevent the
use of the easy-entry / exit feature
(page 101).
iWith a child seat installed in the left
rear seat, the seat belt for the center
seat occupied by a passenger must op-
erate freely. Guide seat belt between
its seat cushion mount and backrest
mount along outside of right side child
seat mount.
Non-LATCH type child seats may also
be used and can be installed using the
vehicle’s seat belt system. Install child
seat according to the manufacturer’s
instructions.

74 Safety and SecurityOccupant safety
Blocking of rear door window operation
1Override switch
Slide override switch1 to the right.
A dot becomes visible. The rear win-
dows can no longer be operated using
the switch in the rear doors.For more information on power windows,
see “Power windows” (
page 146).
Warning!
G
Install child seat according to manufactu-
rer’s instructions.
T h e c h i l d s e a t m u s t b e f i r m l y a t t a c h e d i n t h e
right and left side anchors.
An incorrectly mounted child seat may come
loose during an accident.
Damaged or impact damaged child seats or
child seat mounting fittings must be re-
placed.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
child restraint system.
Children too big for child restraint systems
must ride in back seats using regular seat
belts. Position shoulder belt across chest
and shoulder, not face or neck. A booster
seat may be necessary to achieve proper
belt positioning for children from 41 lbs until
they reach a height where a lap / shoulder
belt fits properly without a booster.
Warning!
G
Activate the override switch when children
are riding in the back seats of the vehicle.
The children may otherwise injure them-
selves, e.g. by becoming trapped in the win-
dow opening.
When leaving the vehicle, always remove the
key from the steering lock, and lock the ve-
hicle. Do not leave children unattended in
the vehicle, or with access to an unlocked
vehicle. Unsupervised use of vehicle equip-
ment may cause an accident and / or seri-
ous personal injury.

105 Controls in detail
Memory function*
Memory function*
With the memory button you can store up
to three different settings for the driver-
and passenger seat.
Together with the driver’s seat you can
store the exterior rear view mirrors.
For the front passenger seat you can store
the seat position.
1Position button
2Memory button

Switch on ignition (
page 33).
!Prior to operating the vehicle, the driv-
er should check and adjust the seat
height, seat position fore and aft, and
seat backrest angle if necessary, to
ensure adequate control, reach and
comfort. The head restraint should also
be adjusted for proper height. See also
the section on airbags (
page 59) for
proper seat positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, opera-
tion and comfort. Both the interior and
exterior rear view mirrors should be ad-
justed for adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standard 213 and 225 and Canadian
Motor Vehicle Safety Standards 213
and 210.2.
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.

249 Practical hints
What to do if …
Problem
Possible cause
Suggested solution
7
The yellow indicator lamp comes
on.
A BabySmart
TM1
child seat is installed on the
front passenger seat. The front passenger
front airbag is therefore switched off.
The system is malfunctioning when there is
no BabySmart
TM child seat installed on the
front passenger seat.

Have the system checked as soon as
possible by an authorized
Mercedes-Benz Light Truck Center.
7
The yellow indicator lamp does
not light up with a BabySmart
TM
child seat properly installed on
the front passenger seat.The system is malfunctioning.

Make sure there is nothing between
seat cushion and child seat and check
installation of the child seat
(page 67).

If the light remains out, have the sys-
tem checked as soon as possible by
an authorized Mercedes-Benz Light
Truck Center.
Do not use the BabySmart
TM restraint
to transport children on the front pas-
senger seat until the system has been
repaired.
1Baby Smart
TM is trademark of Siemens Automotive Corp.

323 Technical terms
ABS
(A
ntilock B
rake S
ystem)
Prevents the wheels from locking up
during braking so that the vehicle can
continue to be steered.
BabySmart
TM airbag deactivation
system
This system detects if a special system
compatible child restraint seat is in-
stalled on the front passenger seat. The
system will automatically deactivate
the passenger front airbag when such a
seat is properly installed (indicator
lamp7 in the instrument cluster
lights up). See an authorized
Mercedes-Benz Light Truck Center for
availability.
BabySmartTM compatible child seats
Special restraint system for children.
The sensor system for the passenger
seat prevents deployment of the pas-
senger front airbag if a BabySmart
TM
compatible child seat is installed.BAS
(B
rake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
Bi-Xenon headlamps*
Headlamps which use an electric arc as
the light source and produce a more
intense light than filament headlamps.
Bi-Xenon headlamps produce low
beam and high beam.
CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service
center, which can help you with any
questions about your vehicle and
provide assistance in the event of a
breakdown.CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control
vehicle functions such as door locking
or windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator / warning lamps in the
passenger compartment needed for
vehicle operation and monitoring.
Cruise control
Driving convenience system for
automatically maintaining the vehicle
speed set by the driver.
Engine number
The number set by the manufacturer
and placed on the cylinder block to
uniquely identify each engine
produced.

326 Technical termsParktronic (Parking assist)*
System which uses visual and acoustic
signals to assist the driver during park-
ing maneuvers.
Poly-V-belt drive
Drives engine-components (alternator,
AC compressor, etc.) from the engine.
Power train
Collective term designating all compo-
nents used to generate and transmit
motive power to the drive axles, includ-
ing


engine


clutch / torque converter


transmission


transfer case


drive shaft


differential


axle shafts / axlesRemote Vehicle Diagnostics
Transmission of vehicle data and cur-
rent location to the Mercedes-Benz
Customer Assistance Center for sub-
scribers to Tele Aid service.
REST
(Residual engine heat utilization)
Feature that uses the engine heat
stored in the coolant to heat the vehi-
cle interior for a short time after the en-
gine has been turned off.
Restraint system
Seat belts, belt tensioner, airbags and
child seat restraint systems. As inde-
pendent systems, their protective func-
tions complement one another.RON
(R
esearch O
ctane N
umber)
The Research Octane Number for gaso-
line as determined by a standardized
method. It is an indication of a gaso-
line's ability to resist undesired detona-
tion (knocking). The average of both
the ->MON (Motor Octane Number)
and RON (Research Octane Number) is
posted at the pump, also known as
ANTI-KNOCK INDEX.
Shift lock
When the vehicle is parked, this lock
prevents the transmission selector le-
ver from being moved out of positionP
without key turned and brake pedal de-
pressed.
SRS
(S
upplemental R
estraint S
ystem)
Seat belts, emergency tensioning de-
vice and airbags. Though independent
systems, they are closely interfaced to
provide effective occupant protection.

332 IndexC
CAC (Customer Assistance Center) 323
Calibrating compass 191
California
Important notice 11
Calling up
Service indicator 238
CAN system 323
Capacities
Fuels, coolants, lubricants, etc. 312
Cargo area see Cargo compartment
Cargo compartment
Liftgate 89
Lighting 116
Tie-down rings 161
Cargo compartment cover blind* 164
Closing 164
Installing 165
Opening 164
Removing 164
Cargo floor plates 165
Installing 166
Removing 165
Storing 165Cargo tie-down rings 161
Catalytic converter 217
CD-changer* 265
Center console 27
Lower part 28
Upper part 27
Central locking
Automatic 93
From inside 94
Switch 94
Unlocking from inside 94
Central locking switch 94
Certification label 304
Charge indicator lamp 261
Charging
Vehicle battery 289
Chart
Fuses 298
CHECK ENGINE malfunction
indicator lamp 254, 255Checking
Coolant level 227
Oil level 223
Tire inflate pressure 221
Vehicle lighting 221
Checking weights
Trailer and vehicle 213
Checklist
Off-road driving 205
Returning from off-road driving 210
Child safety 67
Airbags 60
Infant and child
restraint systems 64, 68
LATCH child seat mounts 73
Child safety switch see Blocking of rear
door window operation
Cigarette lighter
Front center console 171

338 IndexHeadlamp cleaning system* 230
Headlamps
Automatic control 108
Bi-Xenon* 323
Cleaning 242
Cleaning system* 133, 230
Refilling washer fluid 230
Switching off 55
Switching on 50
Washer fluid 319
Washer system 319
Headliner
Cleaning 244
Heated seats* 98
Height adjustment
Head restraints 37, 39
Seat belts 46
Steering wheel 40
High beam 111
High beam flasher 50, 111
High beam halogen headlamps
Replacing bulbs 277
High beam headlamps
Replacing bulbs 274
High mounted brake lamp
Replacing bulbs 281Hood 222
Closing 223
Opening 222
Hooks
Loading 162
Hydroplaning 201
I
Identification labels 304
Certification label 304
Vehicle identification number
(VIN) 304
Ignition 33
Immobilizer 83
Activating 83
Deactivating 83
Indicator lamp
Adjustable steering column 260
Brake pad wear 261
Coolant 256
Front fog lamps 260
Low engine oil level 260
Infant and child restraint systems 68
Installing 71
LATCH child seat mounts 73Information
About service and warranty 10
Button for Tele Aid* 180
Inside rear view mirror
Antiglare 128
Installing
Infant and child restraint systems 71
Wiper blades 283
Instrument cluster 24, 117, 325
Cleaning 244
Coolant temperature gauge 118
Display in the speedometer 118
Illumination 117
Lamps in 259
Outside temperature indicator 119
Instruments and controls see Cockpit
Integrated remote control
Erasing memory 188
Operating 188
Interior lighting 114
Activating automatic control 114
Deactivating automatic control 114
Manual control 115
Reading lamps 115
Interior rear view mirror
Adjusting 41